当引用了Properties.Settings后,如果执行的时候,出现"配置系统无法初始化" 或者 某某节点不正确...

自定义了一个 PowerConfig命名空间   PowerSettings.Settings

 

 然后一个exe,引用了该dll,在app.cinfig里增加了配置项

<applicationSettings>
    <PowerConfig.PowerSettings>
      <setting name= " SharedIp " serializeAs= " String ">
        <value>1 .1.1 .1</value>
      </setting>
    </PowerConfig.PowerSettings>
  </applicationSettings>

 

 但是执行的时候,却提示配置系统无法初始化,猜测是该配置项有问题,但是不子回到什么原因导致的

搜索了下,才发现,在

<configSections>
        <sectionGroup

理也要注册一下,否则,PowerConfig.PowerSettings 找不到

<configSections>
        <sectionGroup name= " applicationSettings " type= " System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 " >
            <section name= " PuppetTool.PutpetSet " type= " System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 " requirePermission= " false " />
            <section name= " PuppetTool.TolSet " type= " System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089 " requirePermission= " false " />
           <section name="PowerConfig.PowerSettings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false"/>
        </sectionGroup>
    </configSections>

 蓝色部分,为自己增加的,其实也就是个section名字,后面的跟上面的都一样,这个在PowerConfig的app.config也能找到的,拷贝过来即可

转载于:https://www.cnblogs.com/davytitan/p/3896460.html