centos 7 配置多网卡bond
关闭 NetworkManager 服务
systemctl stop NetworkManager.service
systemctl disable NetworkManager.service
配置网卡1
复制代码
vim /etc/sysconfig/network-scripts/ifcfg-eno24
TYPE=Ethernet
BOOTPROTO=none
USERCTL=no
DEVICE=eno24
ONBOOT=yes
MASTER=bond0
SLAVE=yes
复制代码
配置网卡2
复制代码
vim /etc/sysconfig/network-scripts/ifcfg-eno25
TYPE=Ethernet
BOOTPROTO=none
USERCTL=no
DEVICE=eno25
ONBOOT=yes
MASTER=bond0
SLAVE=yes
复制代码
配置bond
复制代码
vim /etc/sysconfig/network-scripts/ifcfg-bond0
TYPE=Bond
BOOTPROTO=none
ONBOOT=yes
USERCTL=no
DEVICE=bond0
IPADDR=192.168.1.4
PREFIX=24
GATEWAY=192.169.1.254
NM_CONTROLLED=no
BONDING_MASTER=yes
复制代码
加bonding内核模板
modprobe --first-time bonding
lsmod | grep bonding 或者 modinfo bonding
配置bonding驱动
(实践该步骤未做,便可用)
vim /etc/modprobe.d/bond.conf
alias bond0 binding
options bond0 miimon=100 mode=1
重启网络服务
service network restart
查看bond0生效
cat /proc/net/bonding/bond0
配置dns
vim /etc/resolv.conf
nameserver 202.106.0.20
centos 7默认启动时没有加载bonding模块
复制代码
# 查看bonding模块详细信息
modinfo bonding
filename /lib/modules/3.10.0-229.el7.x86_64/kernel/drivers/net/bonding/bonding.ko
# 配置系统启动时加载bonding模块
vim /etc/sysconfig/modules/bonding.modules
#!/bin/sh
/sbin/modinfo -F filename bonding > /dev/null 2>&1
if [ $? -eq 0 ];then
/sbin/modprobe bonding
fi
# 设置执行权限
chmod 755 /etc/sysconfig/modules/bonding.modules
# 重启查看是否生效
reboot
转载于:https://www.cnblogs.com/centos-python/articles/10083612.html