linux万兆光卡强制发光,求助redhat6.4 无法识别万兆卡问题

更换过四张万兆卡，万兆模块和线都更换过，也试过用光纤模块和线，系统也都重装过几十次，服务器还是有时候识别不到，有时候又可以。

防火墙已关，NetworkManager服务也禁用，Infiniband组件全都打上了。rdma服务也启了。

#lspci一直都可以看到：

07:00.0 Ethernet controller: Mellanox Technologies MT26448 [ConnectX EN 10GigE, PCIe 2.0 5GT/s] (rev b0)

#ifconfig -a有时候能显示万兆卡，有时候重启又不能看到

[root@fss1 ~]# service network restart

Shutting down interface em1: [ OK ]

Shutting down interface em2: [ OK ]

Shutting down loopback interface: [ OK ]

Bringing up loopback interface: [ OK ]

Bringing up interface em1: [ OK ]

Bringing up interface em2: [ OK ]

Bringing up interface p3p1:Device p3p1 does not seem to be present, delaying initialization.[FAILED]

正常识别时没有以下错误，无法识别万兆卡的时候可以看到有以下信息：

[root@fss1 ~]# dmesg |grep mlx4

mlx4_core: Mellanox ConnectX core driver v1.1 (Dec, 2011)

mlx4_core: Initializing 0000:07:00.0

mlx4_core 0000:07:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40

mlx4_core 0000:07:00.0: setting latency timer to 64

mlx4_core 0000:07:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.

mlx4_core 0000:07:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.

mlx4_core 0000:07:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.

mlx4_core 0000:07:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.

mlx4_core 0000:07:00.0: QUERY_FW command failed, aborting.

mlx4_core 0000:07:00.0: PCI INT A disabled

mlx4_core: probe of 0000:07:00.0 failed with error -110

不知道有人遇到过没，下载

Mellanox官网的最新驱动安装了也没用。