centos6 一个vlan配置多ip地址

添加vlan

[root@localhost network-scripts]# vconfig add eth1 109

配置文件,此处配置了vlan109使用子接口进行多ip配置:

[root@localhost network-scripts]# cat ifcfg-eth1.109\:0
DEVICE=eth1.109:0
HWADDR=68:05:CA:25:FC:43
TYPE=Ethernet
UUID=05ed80f3-7699-4702-b93e-016d8b84067d
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=none
VLAN=yes
IPADDR=192.168.15.230
NETMASK=255.255.255.0

[root@localhost network-scripts]# cat ifcfg-eth1.109\:1
DEVICE=eth1.109:1
HWADDR=68:05:CA:25:FC:43
TYPE=Ethernet
UUID=05ed80f3-7699-4702-b93e-016d8b84067d
ONBOOT=yes
NM_CONTROLLED=yes
BOOTPROTO=none
IPADDR=192.168.50.230
NETMASK=255.255.255.0
VLAN=yes
如果是一个vlan一个ip地址如下:
[root@localhost network-scripts]# cat ifcfg-eth1.112 
DEVICE=eth1.112
HWADDR=68:05:CA:25:FC:43
TYPE=Ethernet
UUID=05ed80f3-7699-4702-b93e-016d8b84067d
ONBOOT=yes
NM_CONTROLLED=no
BOOTPROTO=none
VLAN=yes
IPADDR=192.168.46.230
NETMASK=255.255.255.0

以上配置重启网卡生效,自动创建vlan关系:

[root@localhost network-scripts]# service network restart
Shutting down interface eth1.104:                          [  OK  ]
Shutting down interface eth1.112:                          [  OK  ]
Shutting down interface eth1.113:                          [  OK  ]
Shutting down interface eth1.124:                          [  OK  ]

 

查看vlan信息:

[root@localhost network-scripts]# cat /proc/net/vlan/config 
VLAN Dev name	 | VLAN ID
Name-Type: VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD
eth1.109       | 109  | eth1
eth1.104       | 104  | eth1
eth1.112       | 112  | eth1
eth1.113       | 113  | eth1
eth1.124       | 124  | eth1

转载于:https://www.cnblogs.com/ligao/p/6214974.html

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值