下载最新版本:
wget https://busybox.net/downloads/busybox-1.25.1.tar.bz2
tar -jxvf busybox-1.25.1.tar.bz2
一、 交叉编译生成busybox 万能小宝贝工具:
修改 编译配置:
Additon Crossfile:
make menuconfig -->> Busybox Settings -->> Build Option -->> Corss Compile prefix
这里写上你 交叉编译工具链的路径:
/home/hongzhunzhun/work/OpenWrt-SDK-sunxi-for-linux-x86_64-gcc-4.8-linaro_uClibc-0.9.33.2/staging_dir/toolchain-arm_cortex-a7+neon_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/bin/arm-openwrt-linux-uclibcgnueabi-
nsenter.c:(.text.nsenter_main+0x1b0): undefined reference to `setns'
make menuconfig
Linux System Utilities--->nsenter,去掉该选项,重新编译make,又出现如下错误:
sync.c:(.text.sync_main+0x7c): undefined reference to `syncfs'
make menuconfig
Coreutils--->sync选项去掉,重新make编译通过,生成了busybox可执行文件。
make && make install
这一幕 好激动有木有:
大功告成 !!!
默认安装路径 在 主目录下面的 _install 目录 .
UDHCPC:/sbin 目录
UDHCPD:/usr/sbin 目录
DHCPD 使用:
3.配置udhcpd.conf
vi udhcpd.conf
4.创建 leases
mkdir -p /var/lib/misc/
touch /var/lib/misc/udhcpd.leases
5.启动热点
sh /opt/ipnc/program/wifi/wifi_ap.sh
./root/usr/sbin/udhcpd -f /etc/udhcpd.conf &
附件 udhcpd.conf:
# Sample udhcpd configuration file (/etc/udhcpd.conf)
# Values shown are defaults
# The start and end of the IP lease block
start 192.168.43.20
end 192.168.43.254
# The interface that udhcpd will use
interface wlan0
# The maximim number of leases (includes addresses reserved
# by OFFER's, DECLINE's, and ARP conficts). Will be corrected
# if it's bigger than IP lease block, but it ok to make it
# smaller than lease block.
#max_leases 254
# The time period at which udhcpd will write out a dhcpd.leases
# file. If this is 0, udhcpd will never automatically write a
# lease file. Specified in seconds.
#auto_time 7200
# The amount of time that an IP will be reserved (leased to nobody)
# if a DHCP decline message is received (seconds).
#decline_time 3600
# The amount of time that an IP will be reserved
# if an ARP conflct occurs (seconds).
#conflict_time 3600
# How long an offered address is reserved (seconds).
#offer_time 60
# If client asks for lease below this value, it will be rounded up
# to this value (seconds).
#min_lease 60
# The location of the leases file
#lease_file /var/lib/misc/udhcpd.leases
# The location of the pid file
#pidfile /var/run/udhcpd.pid
# Everytime udhcpd writes a leases file, the below script will be called.
#notify_file # default: no script
#notify_file dumpleases # useful for debugging
# The following are bootp specific options, settable by udhcpd.
#siaddr 192.168.0.22 #default: 0.0.0.0
#sname zorak #default: none
#boot_file /var/nfs_root #default: none
# The remainer of options are DHCP options and can be specifed with the
# keyword 'opt' or 'option'. If an option can take multiple items, such
# as the dns option, they can be listed on the same line, or multiple
# lines. The only option with a default is 'lease'.
# Examples:
opt dns 192.168.10.2 192.168.10.10
option subnet 255.255.255.0
opt router 192.168.10.2
opt wins 192.168.10.10
option dns 129.219.13.81 # appened to above DNS servers for a total of 3
option domain local
option lease 864000 # 10 days of seconds
# Currently supported options (for more info, see options.c):
#opt subnet
#opt timezone
#opt router
#opt timesrv
#opt namesrv
#opt dns
#opt logsrv
#opt cookiesrv
#opt lprsrv
#opt bootsize
#opt domain
#opt swapsrv
#opt rootpath
#opt ipttl
#opt mtu
#opt broadcast
#opt wins
#opt lease
#opt ntpsrv
#opt tftp
#opt bootfile
# Static leases map
#static_lease 00:60:08:11:CE:4E 192.168.0.54
#static_lease 00:60:08:11:CE:3E 192.168.0.44
拿走不谢 !!!