sql存储过程分页(sql语句)

declare @TotalCount int
declare @TotalPageCount int
exec P_viewPage_A 'type1','*','id','','id asc',1,0,4,3,@TotalCount output,@TotalPageCount output

select * from type1


Create PROC P_viewPage_A
/*
nzperfect [no_mIss] 高效通用分页存储过程(双向检索) 2007.5.7  QQ:34813284
敬告:适用于单一主键或存在唯一值列的表或视图
ps:Sql语句为8000字节,调用时请注意传入参数及sql总长度不要超过指定范围
*/
@TableName VARCHAR(200),     --表名
@FieldList VARCHAR(2000),    --显示列名,如果是全部字段则为*
@PrimaryKey VARCHAR(100),    --单一主键或唯一值键
@Where VARCHAR(2000),        --查询条件 不含'where'字符,如id>10 and len(userid)>9
@Order VARCHAR(1000),        --排序 不含'order by'字符,如id asc,userid desc,必须指定asc或desc
--注意当@SortType=3时生效,记住一定要在最后加上主键,否则会让你比较郁闷
@SortType INT,               --排序规则 1:正序asc 2:倒序desc 3:多列排序方法
@RecorderCount INT,          --记录总数 0:会返回总记录
@PageSize INT,               --每页输出的记录数
@PageIndex INT,              --当前页数
@TotalCount INT OUTPUT,      --记返回总记录
@TotalPageCount INT OUTPUT   --返回总页数
AS
SET NOCOUNT ON
IF ISNULL(@TotalCount,'') = '' SET @TotalCount = 0
SET @Order = RTRIM(LTRIM(@Order))
SET @PrimaryKey = RTRIM(LTRIM(@PrimaryKey))
SET @FieldList = REPLACE(RTRIM(LTRIM(@FieldList)),' ','')
WHILE CHARINDEX(', ',@Order) > 0 OR CHARINDEX(' ,',@Order) > 0
BEGIN
SET @Order = REPLACE(@Order,', ',',')
SET @Order = REPLACE(@Order,' ,',',')
END
IF ISNULL(@TableName,'') = '' OR ISNULL(@FieldList,'') = ''
OR ISNULL(@PrimaryKey,'') = ''
OR @SortType < 1 OR @SortType >3
OR @RecorderCount  < 0 OR @PageSize < 0 OR @PageIndex < 0
BEGIN
PRINT('ERR_00')
RETURN
END
IF @SortType = 3
BEGIN
IF (UPPER(RIGHT(@Order,4))!=' ASC' AND UPPER(RIGHT(@Order,5))!=' DESC')
BEGIN PRINT('ERR_02') RETURN END
END
DECLARE @new_where1 VARCHAR(1000)
DECLARE @new_where2 VARCHAR(1000)
DECLARE @new_order1 VARCHAR(1000)
DECLARE @new_order2 VARCHAR(1000)
DECLARE @new_order3 VARCHAR(1000)
DECLARE @Sql VARCHAR(8000)
DECLARE @SqlCount NVARCHAR(4000)
IF ISNULL(@where,'') = ''
BEGIN
SET @new_where1 = ' '
SET @new_where2 = ' WHERE  '
END
ELSE
BEGIN
SET @new_where1 = ' WHERE ' + @where
SET @new_where2 = ' WHERE ' + @where + ' AND '
END
IF ISNULL(@order,'') = '' OR @SortType = 1  OR @SortType = 2
BEGIN
IF @SortType = 1
BEGIN
SET @new_order1 = ' ORDER BY ' + @PrimaryKey + ' ASC'
SET @new_order2 = ' ORDER BY ' + @PrimaryKey + ' DESC'
END
IF @SortType = 2
BEGIN
SET @new_order1 = ' ORDER BY ' + @PrimaryKey + ' DESC'
SET @new_order2 = ' ORDER BY ' + @PrimaryKey + ' ASC'
END
END
ELSE
BEGIN
SET @new_order1 = ' ORDER BY ' + @Order
END
IF @SortType = 3 AND  CHARINDEX(','+@PrimaryKey+' ',','+@Order)>0
BEGIN
SET @new_order1 = ' ORDER BY ' + @Order
SET @new_order2 = @Order + ','
SET @new_order2 = REPLACE(REPLACE(@new_order2,'ASC,','{ASC},'),'DESC,','{DESC},')
SET @new_order2 = REPLACE(REPLACE(@new_order2,'{ASC},','DESC,'),'{DESC},','ASC,')
SET @new_order2 = ' ORDER BY ' + SUBSTRING(@new_order2,1,LEN(@new_order2)-1)
IF @FieldList <> '*'
BEGIN
SET @new_order3 = REPLACE(REPLACE(@Order + ',','ASC,',','),'DESC,',',')
SET @FieldList = ',' + @FieldList
WHILE CHARINDEX(',',@new_order3)>0
BEGIN
IF CHARINDEX(SUBSTRING(','+@new_order3,1,CHARINDEX(',',@new_order3)),','+@FieldList+',')>0
BEGIN
SET @FieldList =
@FieldList + ',' + SUBSTRING(@new_order3,1,CHARINDEX(',',@new_order3))
END
SET @new_order3 =
SUBSTRING(@new_order3,CHARINDEX(',',@new_order3)+1,LEN(@new_order3))
END
SET @FieldList = SUBSTRING(@FieldList,2,LEN(@FieldList))
END
END
SET @SqlCount = 'SELECT @TotalCount=COUNT(*),@TotalPageCount=CEILING((COUNT(*)+0.0)/'
+ CAST(@PageSize AS VARCHAR)+') FROM ' + @TableName + @new_where1
IF @RecorderCount  = 0
BEGIN
EXEC SP_EXECUTESQL @SqlCount,N'@TotalCount INT OUTPUT,@TotalPageCount INT OUTPUT',
@TotalCount OUTPUT,@TotalPageCount OUTPUT
END
ELSE
BEGIN
SELECT @TotalCount = @RecorderCount
END
IF @PageIndex > CEILING((@TotalCount+0.0)/@PageSize)
BEGIN
SET @PageIndex =  CEILING((@TotalCount+0.0)/@PageSize)
END
IF @PageIndex = 1 OR @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize)
BEGIN
IF @PageIndex = 1 --返回第一页数据
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where1 + @new_order1
END
IF @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize)  --返回最后一页数据
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'SELECT TOP ' + STR(ABS(@PageSize*@PageIndex-@TotalCount-@PageSize))
+ ' ' + @FieldList + ' FROM '
+ @TableName + @new_where1 + @new_order2 + ' ) AS TMP '
+ @new_order1
END
END
ELSE
BEGIN
IF @SortType = 1  --仅主键正序排序
BEGIN
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2  --正向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' > '
+ '(SELECT MAX(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order1 +' ) AS TMP) '+ @new_order1
END
ELSE  --反向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'SELECT TOP ' + STR(@PageSize) + ' '
+ @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' < '
+ '(SELECT MIN(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@TotalCount-@PageSize*@PageIndex) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2
+ ' ) AS TMP ' + @new_order1
END
END
IF @SortType = 2  --仅主键反序排序
BEGIN
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2  --正向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' < '
+ '(SELECT MIN(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey
+' FROM '+ @TableName
+ @new_where1 + @new_order1 + ') AS TMP) '+ @new_order1
END
ELSE  --反向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'SELECT TOP ' + STR(@PageSize) + ' '
+ @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' > '
+ '(SELECT MAX(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@TotalCount-@PageSize*@PageIndex) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2
+ ' ) AS TMP ' + @new_order1
END
END
IF @SortType = 3  --多列排序,必须包含主键,且放置最后,否则不处理
BEGIN
IF CHARINDEX(',' + @PrimaryKey + ' ',',' + @Order) = 0
BEGIN PRINT('ERR_02') RETURN END
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2  --正向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ ' SELECT TOP ' + STR(@PageSize*@PageIndex) + ' ' + @FieldList
+ ' FROM ' + @TableName + @new_where1 + @new_order1 + ' ) AS TMP '
+ @new_order2 + ' ) AS TMP ' + @new_order1
END
ELSE  --反向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ ' SELECT TOP ' + STR(@TotalCount-@PageSize *@PageIndex+@PageSize) + ' ' + @FieldList
+ ' FROM ' + @TableName + @new_where1 + @new_order2 + ' ) AS TMP '
+ @new_order1 + ' ) AS TMP ' + @new_order1
END
END
END
EXEC(@Sql)
GO

 

 

如何用vc#调用上面的存储过程

    private void fyDB()
    {
        DataTable dt = new DataTable();
        string con = System.Configuration.ConfigurationSettings.AppSettings["connectionstring"];
        SqlConnection conn = new SqlConnection(con);

        SqlCommand comm = new SqlCommand("P_viewPage_A", conn); //建立SqlCommand对象

        comm.CommandType = CommandType.StoredProcedure; //设置SqlCommand对象执行类型为存储过程

        comm.Parameters.Add("@TableName", SqlDbType.VarChar ,200); //向Parameters参数列表添加参数
        comm.Parameters.Add("@FieldList", SqlDbType.VarChar, 2000);
        comm.Parameters.Add("@PrimaryKey", SqlDbType.VarChar, 100);
        comm.Parameters.Add("@where", SqlDbType.VarChar, 2000);
        comm.Parameters.Add("@Order", SqlDbType.VarChar, 1000);
        comm.Parameters.Add("@SortType", SqlDbType.Int);
        comm.Parameters.Add("@RecorderCount", SqlDbType.Int);
        comm.Parameters.Add("@PageSize", SqlDbType.Int);
        comm.Parameters.Add("@PageIndex", SqlDbType.Int);
        comm.Parameters.Add("@TotalCount", SqlDbType.Int);
        comm.Parameters.Add("@TotalPageCount", SqlDbType.Int);

        comm.Parameters["@TotalCount"].Direction = ParameterDirection.Output; //设置参数的输出类型
        comm.Parameters["@TotalPageCount"].Direction = ParameterDirection.Output; //设置参数的输出类型

        comm.Parameters["@TableName"].Value = "type1";//表名
        comm.Parameters["@FieldList"].Value = "*";//显示列名,如果是全部字段则为*
        comm.Parameters["@PrimaryKey"].Value = "id";//单一主键或唯一值键
        comm.Parameters["@where"].Value = "";//查询条件 不含'where'字符,如id>10 and len(userid)>9
        comm.Parameters["@Order"].Value = "id asc";//排序 不含'order by'字符,如id asc,userid desc,必须指定asc或desc
        comm.Parameters["@SortType"].Value = 1;//排序规则 1:正序asc 2:倒序desc 3:多列排序方法
        comm.Parameters["@RecorderCount"].Value = 0;//记录总数 0:会返回总记录
        comm.Parameters["@PageSize"].Value = 2;//每页输出的记录数


        int id1;
        if (Request.QueryString["id"] == null)
            id1 = 1;
        else
            id1 = Convert.ToInt32(Request.QueryString["id"]);
        comm.Parameters["@PageIndex"].Value = id1;//当前页数


        conn.Open();
       // SqlDataReader asr = comm.ExecuteReader();
      //int dtr = (int)comm.ExecuteScalar();
       
       
        SqlDataReader sdr = comm.ExecuteReader();
        int i=0;
        //while (sdr.Read())
        //{
        //    dt.Rows[i][0] = sdr.GetValue(0);
        //    dt.Rows[i][1] = sdr.GetValue(1);
        //}
        dt = ConvertDataReaderToDataTable(sdr);
        GridView1.DataSource = dt;
        GridView1.DataBind();
      // dt.Rows[0][0];

        sdr.Close();
       // Response.Write(dtr);
        Response.Write(comm.Parameters["@TotalCount"].Value + "<br>");

        Response.Write(comm.Parameters["@TotalPageCount"].Value + "<br>");

        //     if((Int32)comm.Parameters["RETURN_VALUE"].Value==0)
        conn.Close();

        //string conStr = System.Configuration.ConfigurationSettings.AppSettings["connectionstring"];
        //SqlConnection connection = new SqlConnection(conStr);

        //DataSet dataSet = new DataSet();
        //connection.Open();
        //SqlDataAdapter sqlDA = new SqlDataAdapter();
        //sqlDA.SelectCommand = BuildQueryCommand(connection, "P_viewPage_A", parameters);
        //sqlDA.Fill(dataSet, tableName);
        //connection.Close();
        //return dataSet;
    }
    #region 将DataReader 转为 DataTable
    /// <summary>
    /// 将DataReader 转为 DataTable
    /// </summary>
    /// <param name="DataReader">DataReader</param>
    public static DataTable ConvertDataReaderToDataTable(SqlDataReader reader)
    {
        try
        {

            DataTable objDataTable = new DataTable();
            int intFieldCount = reader.FieldCount;
            for (int intCounter = 0; intCounter < intFieldCount; ++intCounter)
            {
                objDataTable.Columns.Add(reader.GetName(intCounter), reader.GetFieldType(intCounter));
            }

            objDataTable.BeginLoadData();

            object[] objValues = new object[intFieldCount];
            while (reader.Read())
            {
                reader.GetValues(objValues);
                objDataTable.LoadDataRow(objValues, true);
            }
            reader.Close();
            objDataTable.EndLoadData();

            return objDataTable;

        }
        catch (Exception ex)
        {
            throw new Exception("转换DataReader为DataTable出错!", ex);
        }

    }
    #endregion

转载于:https://www.cnblogs.com/likailinux/archive/2008/07/03/1234529.html

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值