CentOS7 设置软件镜像源

最新推荐文章于 2024-05-06 11:56:33 发布
最新推荐文章于 2024-05-06 11:56:33 发布
阅读量729 收藏
点赞数
文章标签： 运维
原文链接：http://www.cnblogs.com/phpdragon/p/4922012.html
版权

Linux拥有众多的发行版，每个发行版都有提供镜像，但是，在国内这些镜像的下载速度参差不齐，
偶尔会有更新失败的情况。

网上众多推荐的镜像源为163的镜像，笔者通过一段时间的试用，发现某些小众带宽访问163镜像还
是存在一定的问题，所以，决定替换为aliyun的镜像。

下面以修改 CentOS 默认安装源为 阿里云(http://mirrors.aliyun.com/repo/)为例进行说明：

1、备份

cp /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backup

2、配置软件源

下载新的CentOS-Base.repo 到/etc/yum.repos.d/

CentOS 5

wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-5.repo
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client.  You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the 
# remarked out baseurl= line instead.
#
#
 
[base]
name=CentOS-$releasever - Base - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/os/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/os/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-5
 
#released updates 
[updates]
name=CentOS-$releasever - Updates - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/updates/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/updates/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-5
 
#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/extras/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/extras/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-5
 
#packages used/produced in the build but not released
[addons]
name=CentOS-$releasever - Addons - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/addons/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/addons/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=addons
gpgcheck=1
gpgkey=http://mirror.centos.org/centos/RPM-GPG-KEY-CentOS-5
 
#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/centosplus/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/centosplus/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
gpgcheck=1
enabled=0
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-5
 
#contrib - packages by Centos Users
[contrib]
name=CentOS-$releasever - Contrib - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/contrib/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/contrib/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib
gpgcheck=1
enabled=0
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-5
View Code

CentOS 6

wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-6.repo
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client.  You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the 
# remarked out baseurl= line instead.
#
#
 
[base]
name=CentOS-$releasever - Base - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/os/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/os/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-6
 
#released updates 
[updates]
name=CentOS-$releasever - Updates - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/updates/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/updates/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-6
 
#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/extras/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/extras/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-6
 
#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/centosplus/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/centosplus/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
gpgcheck=1
enabled=0
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-6
 
#contrib - packages by Centos Users
[contrib]
name=CentOS-$releasever - Contrib - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/contrib/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/contrib/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib
gpgcheck=1
enabled=0
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-6
View Code

CentOS 7

wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-7.repo
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client.  You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the 
# remarked out baseurl= line instead.
#
#
 
[base]
name=CentOS-$releasever - Base - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/os/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/os/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
 
#released updates 
[updates]
name=CentOS-$releasever - Updates - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/updates/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/updates/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
 
#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/extras/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/extras/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras
gpgcheck=1
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
 
#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/centosplus/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/centosplus/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
gpgcheck=1
enabled=0
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
 
#contrib - packages by Centos Users
[contrib]
name=CentOS-$releasever - Contrib - mirrors.aliyun.com
failovermethod=priority
baseurl=http://mirrors.aliyun.com/centos/$releasever/contrib/$basearch/
        http://mirrors.aliyuncs.com/centos/$releasever/contrib/$basearch/
#mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib
gpgcheck=1
enabled=0
gpgkey=http://mirrors.aliyun.com/centos/RPM-GPG-KEY-CentOS-7
View Code

3、生成缓存

yum makecache

 

转载于:https://www.cnblogs.com/phpdragon/p/4922012.html

weixin_30633949
关注
  • 0
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
CentOS 7 2009版镜像文件，内附下载安装全套教程
06-09
CentOS 7 2009版镜像文件，内附下载安装全套教程 CentOS 7是CentOS项目发布的开源类服务器操作系统，于2014年7月7日正式发布。 [1] CentOS 7是一个企业级的Linux发行版本，它源于RedHat免费公开的源代码进行再发行...
Centos7设置阿里源
fhiguin的博客
12-15 3181
Centos7设置阿里源Centos7设置阿里源1、备份2、下载新的CentOS-Base.repo 到/etc/yum.repos.d/3、执行yum源更新命令 Centos7设置阿里源 1、备份 cd /etc/yum.repos.d/ mv CentOS-Base.repo CentOS-Base.repo.bak 2、下载新的CentOS-Base.repo 到/etc/yum.repos.d/ wget -O /etc/yum.repos.d/CentOS-Base.repo \ http://
Cenos7 配置阿里云yum源
Baozijiaruqin的博客
09-20 720
Centos 7 配置阿里云 yum 源
运维系列（亲测有效）：CentOS7如何更换yum源和如何使用yum安装和卸载软件
最新发布
weixin_54626591的博客
05-06 1777
CentOS7如何更换yum源和如何使用yum安装和卸载软件
Centos7配置阿里云镜像源的教程
lyhshs的博客
03-31 1650
查看你的Centos版本，版本过低会导致安装失败，验证网络是否可以连接阿里云镜像，使用阿里云是需要网络的。# wget命令下载: wget [options] [url]# curl命令下载: curl [options] [url]我上面这个图片由于电脑问题是还没有加载完的。删除原来或者之前的yun源。
配置Centos 更新源 aliyun
CC
12-05 1025
1、打开centos的yum文件夹 输入命令 cd /etc/yum.repos.d/ 2、用wget下载repo文件 输入命令wget http://mirrors.aliyun.com/repo/Centos-7.repo | 如果wget命令不生效，说明还没有安装wget工具， 输入yum -y install wget回车进行安装。 当前目录是/etc/yum.repos....
CentOS 7-软件的镜像设置
东东爱编码博客
03-15 2313
文章目录一、软件的镜像网址1. 设置阿里镜像2. 设置网易镜像3. 设置清华大学开源软件镜像4. 设置中国科大软件镜像 一、软件的镜像网址 1. 设置阿里镜像 阿里云镜像网址：https://developer.aliyun.com/mirror/ 点击对应系统，按照步骤配置即可。 具体操作，有网环境： 安装wget yum -y install wget 备份 mv /etc/yum...
jiangzhangha#ebooks#CentOS安装配置软件镜像源1
07-25
title: CentOS安装配置软件镜像源categories: Linux知识- 安装配置阿里云Linux安装软件镜像源阿里云是最近新出的一个镜像源。阿里云
Centos7部署本地局域网yum源
05-25
本地 yum 源仓库是公司部署大量服务器时的必要配置，因为阿里云镜像源必须要连接外网才可以使用，占用出口带宽，且有些特殊的镜像源架设在国外，使用起来很不稳定。因此，部署本地 yum 源仓库可以解决这些问题。 一...
CentOS7各个版本镜像下载地址.txt
10-27
PS:另外提供国内外各大网站镜像源，也可以下载处于维护的CentOS-Linux版本镜像 开源网站镜像： 搜狐开源镜像站：http://mirrors.sohu.com/ 网易开源镜像站：http://mirrors.163.com/ 开源中国：...
腾讯云CentOS8_yum换源替换文件
06-07
腾讯云CentOS8_yum换源替换文件
更换Centos7的yum源
lht631935612的博客
07-26 4848
说明说明本实例使用Centos7.9版本展示，更换的阿里云的yum源，基本适用于Centos7的所有版本。更换yum源时最好按照步骤操作，不要一步到位，否则容易出错。
CentOS7 配置阿里云yum源,非常之简单
热门推荐
Mr.ACO的专栏
08-22 2万+
如下步骤直接指定为阿里云的下载源 1.进入yum的文件夹 命令：cd /etc/yum.repos.d/ 2.删除yum文件夹所有yum源 命令：rm -rf /etc/yum.repos.d/*.repo 3.利用wget下载阿里云repo文件 命令：wget http://mirrors.aliyun.com/repo/Centos-7.repo 4.执行yum源更新命令 命令：yum clean all 命令：yum ...
centos更换阿里云镜像源（简洁版）
xxhnb666的博客
03-31 6082
如果你已经安装了CentOS系统并使用了默认的yum源，但下载软件包速度慢或者连接不上，你可以考虑更换为阿里云镜像源。1.备份原有的yum源配置文件 在更换之前，建议备份原有的yum源配置文件，以便需要时可以恢复。是适用于CentOS 7的镜像源配置文件，如果你使用的是其他版本的CentOS系统，可以在阿里云官网上查找对应的配置文件。如何ping成功了，也就是有返回数据了，那就证明配置成功了。
Centos7配置阿里云yum源
蔡政洁的博客
11-30 8641
1、打开centos的yum文件夹 cd /etc/yum.repos.d/ 2、用wget下载repo文件 wget http://mirrors.aliyun.com/repo/Centos-7.repo 如果wget命令不生效，说明还没有安装wget工具 yum -y install wget 回车进行安装，当前目录是/etc/yum.repos.d/，刚刚下载的Centos-7.repo也在这个目录上。 3、备份系统原来的repo文件 mv CentOS-Base.repo CentOS-Ba
CentOS 7 安装后的 repo 源管理
weixin_39094034的博客
10-28 5121
添加 EPEL 源
Centos7更换yum源为阿里云遇到的问题
好好学习天天向上
04-23 705
在另一台服务器上下载Centos-7.repo重命名为CentOS-Base.repo。
CentOS7 配置阿里云yum源
非衣鲲化的博客
03-26 1257
1）下载repo文件 wget http://mirrors.aliyun.com/repo/Centos-7.repo 2）备份并替换系统的repo文件 cp Centos-7.repo /etc/yum.repos.d/ cd /etc/yum.repos.d/ mv CentOS-Base.repo CentOS-Base.repo.bak mv Centos-7.repo Ce...
centos7 yum 配置阿里云源
悟世君子的博客
07-02 5807
yum 默认是国外的源。网络好的情况下还可以，网络不好的话安装某些包经常超时，因此使用国内源替换是最好的办法进入 etc 目录 找到 yum 相关的目录，找到 yum.repos.d 目录，进入 yum.repos.d 目录 备份原 CentOS-Base.repo 文件 浏览器打开阿里云镜像站 http://mirrors.aliyun.com/repo/找到 Centos-7.repo 文件，将其下载，然后上传到 /etc/yum.repos.d 目录 至此完...
centos7清华大学镜像源下载
11-30
以下是在CentOS 7中使用清华大学镜像源下载的步骤： 1.打开命令行终端。 2.备份原有的yum源配置文件。 ```shell sudo mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backup ``` 3....

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值