poj 1613 Cave Raider

Cave Raider
Time Limit: 1000MS Memory Limit: 10000K
Total Submissions: 551 Accepted: 171

Description

Afkiyia is a big mountain. Inside the mountain, there are many caves. These caves are connected by tunnels. Hidden in one of the caves is a terrorist leader. Each tunnel connects two caves. There could be more than one tunnels connect the same two caves.
At the joint of a tunnel and a cave, there is a door. From time to time, the terrorists close a tunnel by shutting the two doors at the two ends, and "clean" the tunnel. It is still a mystery how they clean the tunnel. However, we know that if a person (or any living creature) is trapped in the tunnel when it is being cleaned, then the person (or the living creature) will die. After a cleaning of the tunnel is finished, the door will open, and the tunnel can be used again.
Now the intelligence servicemen have found out which cave the leader is hiding,and moreover, they know the schedule of the cleaning of the tunnels. Jing Raider is going to go into the cave and catch the leader. You need to help him find a route so that he can get to that cave in the shortest time. Be careful not to be trapped in a tunnel when it is being cleaned.

Input

The input consists of a number of test cases. The 1st line of a test case contains four positive integers n,m, s, t, separated by at least one space, where n is the number of caves (numbered 1, 2, ... , n), m is the number of tunnels (numbered 1, 2, ... ,m), s is the cave where Jing is located at time 0, and t is the cave where the terrorist leader is hiding. (1 <= s, t <= n <= 50 and m <= 500).
The next m lines are information of the m tunnels: Each line is a sequence of at most 35 integers separated by at least one space. The first two integers are the caves that are the ends of the corresponding tunnel. The third integer is the time needed to travel from one end of the tunnel to the other. This is followed by an increasing sequence of positive integers (each integer is at most 10000) which are alternately the closing and the opening times of the tunnel. For example, if the line is
10 14 5 6 7 8 9
then it means that the tunnel connects cave 10 and cave 14, it takes 5 units of time to go from one end to the other. The tunnel is closed at time 6, opened at time 7, then closed again at time 8, opened again at time 9. Note that the tunnel is being cleaned from time 6 to time 7, and then cleaned again from time 8 to time 9. After time 9, it remains open forever.
If the line is
10 9 15 8 18 23
then it means that the tunnel connects cave 10 and cave 9, it takes 15 units of time to go from one end to the other. The tunnel is closed at time 8, opened at time 18,then closed again at time 23. After time 23, it remains closed forever.
The next test case starts after the last line of the previous case. A 0 signals the end of the input.

Output

The output contains one line for each test case. Each line contains either an integer, which is the time needed for Jing to get to cave t, or the symbol *, which means that Jing can never get to cave t. Note that the starting time is 0. So if s = t, i.e., Jing is at the same cave as the terrorist leader, then the output is 0.

Sample Input

2 2 1 2
1 2 5 4 10 14 20 24 30
1 2 6 2 10 22 30
6 9 1 6
1 2 6 5 10
1 3 7 8 20 30 40
2 4 8 5 13 21 30
3 5 10 16 25 34 45
2 5 9 22 32 40 50
3 4 15 2 8 24 34
4 6 10 32 45 56 65
5 6 3 2 5 10 15
2 3 5 2 9 19 25
2 2 1 2
1 2 7 6 9 12
1 2 9 8 12 19
0

Sample Output

16
55
*

Source


sfpa 算法,
知道怎么更新就好了
队列的点出队列后,判断它能否更新临近的点
就是在隧道开开启的时间段他能否有时间通过
1A 比较开心的
#include <iostream> #include <stdio.h> #include <queue> #include <stack> #include <set> #include <vector> #include <math.h> #include <string.h> #include <algorithm> using namespace std; #define N 52 #define Max 1000000000 structnode { int to; int cost; int next; int n; int t[43]; }Eg[1002]; int v[N]; char ch[1002]; int n,m,s,t; int nu; int rc [N]; void del(char *ch) { int i; int id=0; int t=0; for(i=0;ch[i]!='\0';i++) if(ch[i]>='0'&&ch[i]<='9') t=t*10+ch[i]-'0'; else if(t) { rc[id++]=t; t=0; } if(t) rc[id++]=t; int a=rc[0],b=rc[1],c=rc[2]; Eg[nu].to=b; Eg[nu].n=id-2; Eg[nu].cost=c; Eg[nu].next=v[a]; v[a]=nu++; Eg[nu].to=a; Eg[nu].n=id-2; Eg[nu].cost=c; Eg[nu].next=v[b]; v[b]=nu; a=1; for(i=3;i<id;i++) { Eg[nu-1].t[a]=rc[i]; Eg[nu].t[a++]=rc[i]; } Eg[nu-1].t[a]=Max;//自加了个Max代表无穷远了 Eg[nu].t[a++]=Max; nu++; } int dis[N]; int main() { int i,k,a; while(scanf("%d %d %d %d",&n,&m,&s,&t)==4&&n) { memset(v,-1,sizeof(v)); nu=0;gets(ch); while(m--) { gets(ch); del(ch); } if(s==t) { printf("0\n");continue;} for(i=1;i<=n;i++) dis[i]=Max; dis[s]=0; memset(rc,0,sizeof(rc)); queue<int>Q; Q.push(s);rc[s]=1; int time,len; while(!Q.empty()) { a=Q.front();Q.pop(); rc[a]=0; for(i=v[a];i!=-1;i=Eg[i].next) { for(k=1;k<=Eg[i].n;k++) if(k%2) { len=Eg[i].t[k]-Eg[i].t[k-1]; time=max(dis[a],Eg[i].t[k-1])+Eg[i].cost; if(len>=Eg[i].cost&&Eg[i].t[k]>=time&&time<dis[Eg[i].to])//可以更新的条件 { dis[Eg[i].to]=time; if(!rc[Eg[i].to]) Q.push(Eg[i].to); break; } } } } if(dis[t]==Max) printf("*\n"); else printf("%d\n",dis[t]); } return 0; }

转载于:https://www.cnblogs.com/372465774y/archive/2012/11/19/2777624.html

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
编译原理是计算机专业的一门核心课程,旨在介绍编译程序构造的一般原理和基本方法。编译原理不仅是计算机科学理论的重要组成部分,也是实现高效、可靠的计算机程序设计的关键。本文将对编译原理的基本概念、发展历程、主要内容和实际应用进行详细介绍编译原理是计算机专业的一门核心课程,旨在介绍编译程序构造的一般原理和基本方法。编译原理不仅是计算机科学理论的重要组成部分,也是实现高效、可靠的计算机程序设计的关键。本文将对编译原理的基本概念、发展历程、主要内容和实际应用进行详细介绍编译原理是计算机专业的一门核心课程,旨在介绍编译程序构造的一般原理和基本方法。编译原理不仅是计算机科学理论的重要组成部分,也是实现高效、可靠的计算机程序设计的关键。本文将对编译原理的基本概念、发展历程、主要内容和实际应用进行详细介绍编译原理是计算机专业的一门核心课程,旨在介绍编译程序构造的一般原理和基本方法。编译原理不仅是计算机科学理论的重要组成部分,也是实现高效、可靠的计算机程序设计的关键。本文将对编译原理的基本概念、发展历程、主要内容和实际应用进行详细介绍编译原理是计算机专业的一门核心课程,旨在介绍编译程序构造的一般原理和基本

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值