http://en.wikipedia.org/wiki/CPUID
CPUID
The CPUID
opcode is a processor supplementary instruction (its name derived from CPU IDentification) for the x86 architecture. It was introduced by Intel in 1993 when it introduced thePentium and SL-Enhanced 486 processors.[1]
By using the CPUID
opcode, software can determine processor type and the presence of features (like MMX/SSE). The CPUID
opcode is 0Fh, 0A2h (as two bytes, or 0A20Fh as a single word) and the value in the EAX register, and in some cases the ECX register, specifies what information to return.
Prior to the general availability of the CPUID
instruction, programmers would write esoteric machine code which exploited minor differences in CPU behavior in order to determine the processor make and model.[2][3] Outside the x86 family, developers are sometimes still required to use esoteric processes to determine the variations in CPU design that are present. While the CPUID
instruction is specific to the x86 architecture, other architectures often provide on-chip registers which can be read to obtain the same sorts of information provided by this instruction.
Contents
[hide]- 1 Calling CPUID
- 1.1 EAX=0: Get vendor ID
- 1.2 EAX=1: Processor Info and Feature Bits
- 1.3 EAX=2: Cache and TLB Descriptor information
- 1.4 EAX=3: Processor Serial Number
- 1.5 EAX=80000000h: Get Highest Extended Function Supported
- 1.6 EAX=80000001h: Extended Processor Info and Feature Bits
- 1.7 EAX=80000002h,80000003h,80000004h: Processor Brand String
- 1.8 EAX=80000005h: L1 Cache and TLB Identifiers
- 1.9 EAX=80000006h: Extended L2 Cache Features
- 1.10 EAX=80000007h: Advanced Power Management Information
- 1.11 EAX=80000008h: Virtual and Physical address Sizes
- 2 Accessing the id from other languages
- 3 Uptake of CPUID instructions outside x86
- 4 See also
- 5 References
- 6 External links
Calling CPUID[edit]
In assembly language the CPUID
instruction takes no parameters as CPUID
implicitly uses the EAX register. The EAX register should be loaded with a value specifying what information to return. CPUID
should be called with EAX = 0
first, as this will return the highest calling parameter that the CPU supports. To obtain extended function information CPUID
should be called with the second most significant bit of EAX set. To determine the highest extended function calling parameter, call CPUID
with EAX = 80000000h
.
EAX=0: Get vendor ID[edit]
This returns the CPU's manufacturer ID string - a twelve character ASCII string stored in EBX, EDX, ECX - in that order. The highest basic calling parameter (largest value that EAX can be set to before calling CPUID
) is returned in EAX.
The following are known processor manufacturer ID strings:
- "AMDisbetter!" — early engineering samples of AMD K5 processor
- "AuthenticAMD" — AMD
- "CentaurHauls" — Centaur
- "CyrixInstead" — Cyrix
- "GenuineIntel" — Intel
- "TransmetaCPU" — Transmeta
- "GenuineTMx86" — Transmeta
- "Geode by NSC" — National Semiconductor
- "NexGenDriven" — NexGen
- "RiseRiseRise" — Rise
- "SiS SiS SiS " — SiS
- "UMC UMC UMC " — UMC
- "VIA VIA VIA " — VIA
- "Vortex86 SoC" — Vortex
- "KVMKVMKVMKVM" — KVM
For instance, on a GenuineIntel processor values returned in EBX is 0x756e6547, EDX is 0x49656e69 and ECX is 0x6c65746e. The following code is written in GNU Assembler for the x86-64 architecture and displays the vendor ID string as well as the highest calling parameter that the CPU supports.
.data s0: .asciz "Largest basic function number supported: %i\n" s1: .asciz "Vendor ID: %.12s\n" .text .align 32 .globl _start _start: pushq %rbp pushq %rbx movq %rsp,%rbp subq $16,%rsp xorl %eax,%eax cpuid movl %ebx,0(%rsp) movl %edx,4(%rsp) movl %ecx,8(%rsp) movq $s0,%rdi movl %eax,%esi xorb %al,%al call printf movq $s1,%rdi movq %rsp,%rsi xorb %al,%al call printf movq %rbp,%rsp popq %rbx popq %rbp movl $1,%eax int $0x80
EAX=1: Processor Info and Feature Bits[edit]
This returns the CPU's stepping, model, and family information in EAX (also called the signature of a CPU), feature flags in EDX and ECX, and additional feature info in EBX.
The format of the information in EAX is as follows:
- 3:0 - Stepping
- 7:4 - Model
- 11:8 - Family
- 13:12 - Processor Type
- 19:16 - Extended Model
- 27:20 - Extended Family
Intel has suggested applications to display the family of a CPU as the sum of the "Family" and the "Extended Family" fields shown above, and the model as the sum of the "Model" and the 4-bit left-shifted "Extended Model" fields.[4]
AMD recommends the same only if "Family" is equal to 15 (i.e. all bits set to 1). If "Family" is lower than 15, only the "Family" and "Model" fields should be used while the "Extended Family" and "Extended Model" bits are reserved. If "Family" is set to 15, then "Extended Family" and the 4-bit left-shifted "Extended Model" should be added to the respective base values.[5]
The processor info and feature flags are manufacturer specific but usually the Intel values are used by other manufacturers for the sake of compatibility.
The standard Intel feature flags are as follows[6][7]
Bit | EDX | ECX | ||
---|---|---|---|---|
Short | Feature | Short | Feature | |
0 | fpu | Onboard x87 FPU | pni | Prescott New Instructions (SSE3) |
1 | vme | Virtual mode extensions (VIF) | pclmulqdq | PCLMULQDQ support |
2 | de | Debugging extensions (CR4 bit 3) | dtes64 | 64-bit debug store (edx bit 21) |
3 | pse | Page Size Extension | monitor | MONITOR and MWAIT instructions (SSE3) |
4 | tsc | Time Stamp Counter | ds_cpl | CPL qualified debug store |
5 | msr | Model-specific registers | vmx | Virtual Machine eXtensions |
6 | pae | Physical Address Extension | smx | Safer Mode Extensions (LaGrande) |
7 | mce | Machine Check Exception | est | Enhanced SpeedStep |
8 | cx8 | CMPXCHG8 (compare-and-swap) instruction | tm2 | Thermal Monitor 2 |
9 | apic | Onboard Advanced Programmable Interrupt Controller | ssse3 | Supplemental SSE3 instructions |
10 | (reserved) | cid | Context ID | |
11 | sep | SYSENTER and SYSEXIT instructions | (reserved) | |
12 | mtrr | Memory Type Range Registers | fma | Fused multiply-add (FMA3) |
13 | pge | Page Global Enable bit in CR4 | cx16 | CMPXCHG16B instruction |
14 | mca | Machine check architecture | xtpr | Can disable sending task priority messages |
15 | cmov | Conditional move and FCMOV instructions | pdcm | Perfmon & debug capability |
16 | pat | Page Attribute Table | (reserved) | |
17 | pse36 | 36-bit page size extension | pcid | Process context identifiers (CR4 bit 17) |
18 | pn | Processor Serial Number | dca | Direct cache access for DMA writes[8][9] |
19 | clflush | CLFLUSH instruction (SSE2) | sse4_1 | SSE4.1 instructions |
20 | (reserved) | sse4_2 | SSE4.2 instructions | |
21 | dts | Debug store: save trace of executed jumps | x2apic | x2APIC support |
22 | acpi | Onboard thermal control MSRs for ACPI | movbe | MOVBE instruction (big-endian, Intel Atom only) |
23 | mmx | MMX instructions | popcnt | POPCNT instruction |
24 | fxsr | FXSAVE, FXRESTOR instructions, CR4 bit 9 | tscdeadline | APIC supports one-shot operation using a TSC deadline value |
25 | sse | SSE instructions (a.k.a. Katmai New Instructions) | aes | AES instruction set |
26 | sse2 | SSE2 instructions | xsave | XSAVE, XRESTOR, XSETBV, XGETBV |
27 | ss | CPU cache supports self-snoop | osxsave | XSAVE enabled by OS |
28 | ht | Hyper-threading | avx | Advanced Vector Extensions |
29 | tm | Thermal monitor automatically limits temperature | f16c | CVT16 instruction set (half-precision) FP support |
30 | ia64 | IA64 processor emulating x86 | rdrnd | RDRAND (on-chip random number generator) support |
31 | pbe | Pending Break Enable (PBE# pin) wakeup support | hypervisor | Running on a hypervisor (always 0 on a real CPU, but also with some hypervisors) |
EAX=2: Cache and TLB Descriptor information[edit]
This returns a list of descriptors indicating cache and TLB capabilities in EAX, EBX, ECX and EDX registers.
EAX=3: Processor Serial Number[edit]
This returns the processor's serial number. The processor serial number was introduced on Intel Pentium III, but due to privacy concerns, this feature is no longer implemented on later models (PSN feature bit is always cleared). Transmeta's Efficeon and Crusoe processors also provide this feature. AMD CPUs however, do not implement this feature in any CPU models.
For Intel Pentium III CPUs, the serial number is returned in EDX:ECX registers. For Transmeta Efficeon CPUs, it is returned in EBX:EAX registers. And for Transmeta Crusoe CPUs, it is returned in EBX register only.
Note that the processor serial number feature must be enabled in the BIOS setting in order to function.
EAX=80000000h: Get Highest Extended Function Supported[edit]
The highest calling parameter is returned in EAX.
EAX=80000001h: Extended Processor Info and Feature Bits[edit]
This returns extended feature flags in EDX and ECX.
AMD feature flags are as follows[10][11]
Bit | EDX | ECX | ||
---|---|---|---|---|
Short | Feature | Short | Feature | |
0 | fpu | Onboard x87 FPU | lahf_lm | LAHF/SAHF in long mode |
1 | vme | Virtual mode extensions (VIF) | cmp_legacy | Hyperthreading not valid |
2 | de | Debugging extensions (CR4 bit 3) | svm | Secure Virtual Machine |
3 | pse | Page Size Extension | extapic | Extended APIC space |
4 | tsc | Time Stamp Counter | cr8_legacy | CR8 in 32-bit mode |
5 | msr | Model-specific registers | abm | Advanced bit manipulation (lzcnt and popcnt) |
6 | pae | Physical Address Extension | sse4a | SSE4a |
7 | mce | Machine Check Exception | misalignsse | Misaligned SSE mode |
8 | cx8 | CMPXCHG8 (compare-and-swap) instruction | 3dnowprefetch | PREFETCH and PREFETCHW instructions |
9 | apic | Onboard Advanced Programmable Interrupt Controller | osvw | OS Visible Workaround |
10 | (reserved) | ibs | Instruction Based Sampling | |
11 | syscall | SYSCALL and SYSRET instructions | xop | XOP instruction set |
12 | mtrr | Memory Type Range Registers | skinit | SKINIT/STGI instructions |
13 | pge | Page Global Enable bit in CR4 | wdt | Watchdog timer |
14 | mca | Machine check architecture | (reserved) | |
15 | cmov | Conditional move and FCMOV instructions | lwp | Light Weight Profiling[12] |
16 | pat | Page Attribute Table | fma4 | 4 operands fused multiply-add |
17 | pse36 | 36-bit page size extension | tce | Translation Cache Extension |
18 | (reserved) | |||
19 | mp | Multiprocessor Capable | nodeid_msr | NodeID MSR |
20 | nx | NX bit | (reserved) | |
21 | (reserved) | tbm | Trailing Bit Manipulation | |
22 | mmxext | Extended MMX | topoext | Topology Extensions |
23 | mmx | MMX instructions | perfctr_core | Core performance counter extensions |
24 | fxsr | FXSAVE, FXRSTOR instructions, CR4 bit 9 | perfctr_nb | NB performance counter extensions |
25 | fxsr_opt | FXSAVE/FXRSTOR optimizations | (reserved) | |
26 | pdpe1gb | Gibibyte pages | (reserved) | |
27 | rdtscp | RDTSCP instruction | (reserved) | |
28 | (reserved) | |||
29 | lm | Long mode | (reserved) | |
30 | 3dnowext | Extended 3DNow! | (reserved) | |
31 | 3dnow | 3DNow! | (reserved) |
EAX=80000002h,80000003h,80000004h: Processor Brand String[edit]
These return the processor brand string in EAX, EBX, ECX and EDX. CPUID
must be issued with each parameter in sequence to get the entire 48-byte null-terminated ASCII processor brand string.[4] It is necessary to check whether the feature is supported by the CPU by issuing CPUID
with EAX = 80000000h
first and checking if the returned value is greater or equal to 80000004h.
.section .data s0 : .asciz "Processor Brand String: %.48s\n" err : .asciz "Feature unsupported.\n" .section .text .global main .type main,@function .align 32 main: pushq %rbp movq %rsp, %rbp subq $48, %rsp pushq %rbx movl $0x80000000, %eax cpuid cmpl $0x80000004, %eax jl error movl $0x80000002, %esi movq %rsp, %rdi .align 16 get_brand: movl %esi, %eax cpuid movl %eax, (%rdi) movl %ebx, 4(%rdi) movl %ecx, 8(%rdi) movl %edx, 12(%rdi) addl $1, %esi addq $16, %rdi cmpl $0x80000004, %esi jle get_brand print_brand: movq $s0, %rdi movq %rsp, %rsi xorb %al, %al call printf jmp end .align 16 error: movq $err, %rdi xorb %al, %al call printf .align 16 end: popq %rbx movq %rbp, %rsp popq %rbp xorl %eax, %eax ret
EAX=80000005h: L1 Cache and TLB Identifiers[edit]
This function contains the processor’s L1 cache and TLB characteristics.
EAX=80000006h: Extended L2 Cache Features[edit]
Returns details of the L2 cache in ECX, including the line size in bytes, type of associativity (encoded by a 4 bits) and the cache size.
.section .data info : .ascii "L2 Cache Size : %u KB\nLine size : %u bytes\n" .asciz "Associativity : %02xh\n" err : .asciz "Feature unsupported.\n" .section .text .global main .type main,@function .align 32 main: pushq %rbp movq %rsp, %rbp pushq %rbx movl $0x80000000, %eax cpuid cmpl $0x80000006, %eax jl error movl $0x80000006, %eax cpuid movl %ecx, %eax movl %eax, %edx andl $0xff, %edx movl %eax, %ecx shrl $12, %ecx andl $0xf, %ecx movl %eax, %esi shrl $16, %esi andl $0xffff,%esi movq $info, %rdi xorb %al, %al call printf jmp end .align 16 error: movq $err, %rdi xorb %al, %al call printf .align 16 end: popq %rbx movq %rbp, %rsp popq %rbp xorl %eax, %eax ret
EAX=80000007h: Advanced Power Management Information[edit]
This function provides advanced power management feature identifiers.
EAX=80000008h: Virtual and Physical address Sizes[edit]
Returns largest virtual and physical address sizes in EAX.
Accessing the id from other languages[edit]
This information is easy to access from other languages as well. For instance, the C++ code for gcc below prints the first five values, returned by the cpuid:
#include <iostream> int main() { int a, b; for (a = 0; a < 5; a++) { __asm__("cpuid;" :"=a"(b) // EAX into b (output) :"0"(a) // a into EAX (input) :"%ebx","%ecx","%edx"); // clobbered registers std::cout << "The code " << a << " gives " << b << std::endl; } return 0; }
In C, the code may be shortened to:
int main() { int a, b; for (a = 0; a < 5; a++) { __asm__("cpuid" :"=a"(b) // EAX into b (output) :"0"(a) // a into EAX (input) :"%ebx","%ecx","%edx"); // clobbered registers printf("The code %i gives %i\n", a, b); } return 0; }
Or, a generally useful C implementation that works on 32 and 64 bit setups:
#include <stdio.h> int main() { int i; unsigned int index = 0; unsigned int regs[4]; int sum; __asm__ __volatile__( #if defined(__x86_64__) || defined(_M_AMD64) || defined (_M_X64) "pushq %%rbx \n\t" /* save %rbx */ #else "pushl %%ebx \n\t" /* save %ebx */ #endif "cpuid \n\t" "movl %%ebx ,%[ebx] \n\t" /* write the result into output var */ #if defined(__x86_64__) || defined(_M_AMD64) || defined (_M_X64) "popq %%rbx \n\t" #else "popl %%ebx \n\t" #endif : "=a"(regs[0]), [ebx] "=r"(regs[1]), "=c"(regs[2]), "=d"(regs[3]) : "a"(index)); for (i=4; i<8; i++) { printf("%c" ,((char *)regs)[i]); } for (i=12; i<16; i++) { printf("%c" ,((char *)regs)[i]); } for (i=8; i<12; i++) { printf("%c" ,((char *)regs)[i]); } printf("\n"); }
Another version of that:
#include <stdio.h> void cpuid(unsigned info, unsigned *eax, unsigned *ebx, unsigned *ecx, unsigned *edx) { __asm__( "xchg %%ebx, %%edi;" /* 32bit PIC: don't clobber ebx */ "cpuid;" "xchg %%ebx, %%edi;" :"=a" (*eax), "=D" (*ebx), "=c" (*ecx), "=d" (*edx) :"0" (info) ); } int main() { unsigned int eax, ebx, ecx, edx; int i; for (i = 0; i < 6; ++i) { cpuid(i, &eax, &ebx, &ecx, &edx); printf("eax=%i: %#010x %#010x %#010x %#010x\n", i, eax, ebx, ecx, edx); } return 0; }
Microsoft Visual C compiler has builtin function __cpuid() so cpuid instruction may be embedded without using inline assembly. This is handy since x64 version of MSVC doesn't allow inline assembly at all. The same program for MSVC would be:
#include <iostream> #include <intrin.h> int main() { int b[4]; for (int a = 0; a < 5; a++) { __cpuid(b, a); std::cout << "The code " << a << " gives " << b[0] << std::endl; } return 0; }
For Borland/Embarcadero C compilers (bcc32), native asm function calls are necessary, as there is no asm() implementation. The pseudo code:
unsigned int a, b, c, d; unsigned int InfoType = 0; __asm xor EBX, EBX; __asm xor ECX, ECX; __asm xor EDX, EDX; __asm mov EAX, InfoType; __asm cpuid; __asm mov a, EAX; __asm mov b, EBX; __asm mov c, ECX; __asm mov d, EDX;
Many interpreted or compiled scripting languages are capable of using CPUID via an FFI library. One such implementation shows usage of the Ruby FFI module to execute assembly language that includes the CPUID opcode.
Uptake of CPUID instructions outside x86[edit]
The Intel-AMD x86 family has so far been the only CPU family to have a CPUID
instruction. RISC, DSP and transputer like chip families have not taken up the instruction in any noticeable way, in spite of having (in relative terms) as many variations in design. ARM architectures have a CPUID
coprocessor register for the same purpose.[13] IBM mainframe processor z10 and predecessors have had the Store CPUID (STIDP) instruction for querying the processor ID.[14]
See also[edit]
- CPU-Z, a Windows utility that uses
CPUID
to identify various system settings
References[edit]
- Jump up^ "Intel 64 and IA-32 Architectures Software Developer’s Manual". Intel.com. Retrieved 2013-04-11.
- Jump up^ "Detecting Intel Processors - Knowing the generation of a system CPU". Rcollins.org. Retrieved 2013-04-11.
- Jump up^ "LXR linux-old/arch/i386/kernel/head.S". Lxr.linux.no. Retrieved 2013-04-11.
- ^ Jump up to:a b "Intel® Processor Identification and the CPUID Instruction". Download.intel.com. 2012-03-06. Retrieved 2013-04-11.
- Jump up^http://support.amd.com/us/Embedded_TechDocs/25481.pdf
- Jump up^ Application Note 485: Intel Processor Identification and the CPUID Instruction, Intel, January 2011, retrieved 2011-05-29
- Jump up^ Linux kernel source codearch/x86/include/asm/cpufeatures.h
- Jump up^ Huggahalli, Ram; Iyer, Ravi; Tetrick, Scott (2005). "Direct Cache Access for High Bandwidth Network I/O". ACM SIGARCH Computer Architecture News 33 (2): 50–59.doi:10.1145/1080695.1069976.CiteSeerX:10.1.1.91.957.
- Jump up^ Drepper, Ulrich (2007), What Every Programmer Should Know About Memory, CiteSeerX:10.1.1.91.957
- Jump up^ CPUID Specification, AMD, September 2010, retrieved 2013-04-02
- Jump up^ Linux kernel source code [1]
- Jump up^ Lightweight Profiling Specification, AMD, August 2010, retrieved 2013-04-03
- Jump up^ "ARM Information Center". Infocenter.arm.com. Retrieved 2013-04-11.
- Jump up^ "IBM System z10 Enterprise Class Technical Guide".
External links[edit]
- x86 architecture CPUID
- Intel CPUID guide (PDF)
- AMD CPUID guide (PDF)
- cpuid in msr-tools CPUID utility for multi-processor platform
http://software.intel.com/en-us/node/183990
Intel Architecture and Processor Identification With CPUID Model and Family Numbers
This article is intended to aid software developers in understanding the "big picture" of Intel's recent architecture and processor releases. The "tick tock" model adds predictability to the Intel® architecture roadmap. However within each "tick" and "tock" architecture, multiple processors are launched to support the many diverse computing needs of consumers. While the general Instruction Set Architecture (ISA) and feature set within a given architecture are identical, certain model specific variations occur, and are generally enumerated through CPUID interrogation[1]. The CPUID model number is a convenient way of anticipating the model specific functionality that is available at runtime and subsequently designing the architecture specific parts of software (nevertheless, at runtime, the feature bits in the CPUID should always be verified before use).
The information in the table below is composed from the "Intel® Processor Identification and the CPUID Instruction" and the official Intel product information source.
For identifying a particular processor, please use the Intel® Processor Identification Utility for Microsoft Windows* operating systems or the bootable version for other operating systems[2].
Notes
- The -EP suffix denotes a Dual Processor, meaning this processor is designed to operate in a Dual Processor platform (but can still operate in a Single Processor platform). The -EX suffix denotes a Multi-Processor (MP), meaning this processor is designed to operate in a Multiprocessor platform, but can still operate in a Single or Dual processor platform configuration.
- The Family number is an 8-bit number derived from the processor signature by adding the Extended Family number (bits 27:20) and the Family number (bits 11:8). See section 5.1.2.2 of the "Intel Processor Identification and the CPUID Instruction".
- The Model number is an 8 bit number derived from the processor signature by shifting the Extended Model number (bits 19:16) 4 bits to the left and adding the Model number (bits 7:4) . See section 5.1.2.2 of the "Intel Processor Identification and the CPUID Instruction".
Mainline Architectures and Processors
This table includes the mainline processors on 90nm and later process technology. Please read and understand these important disclaimersprior to use.
Process | Microarchitecture | Processor | Processor | Family | Model | Intel® Brand | Intel® Brand |
---|---|---|---|---|---|---|---|
22 nm | IvyBridge | IvyBridge | 0x306Ax | 0x06 | 0x3A | Core™ i3 | i3-31xx/32xx-T/U |
32 nm | SandyBridge | SandyBridge | 0x206Ax | 0x2A | Core™ i3 | i3-21xx/23xx-T/M/E/UE | |
SandyBridge-E | 0x206Dx | 0x2D | Core™ i7 | I7-3820/3930K | |||
SandyBridge-EN | Xeon™ E5 | E5-24xx | |||||
SandyBridge-EP | Xeon™ E5 | E5-16xx, 26xx/L/W | |||||
Westmere | Arrandale | 0x2065x | 0x25 | Celeron™ Mobile | P4xxx, U3xxx | ||
Clarksdale | Pentium™ Desktop | G69xx | |||||
Gulftown | 0x206Cx | 0x2C | Core™ i7 | i7-9xx | |||
Westmere-EP | Xeon™ 3000 | W36xx | |||||
Westmere-EX | 0x206Fx | 0x2F | Xeon™ E7 | E7-2xxx, E7-48xx, E7-88xx | |||
45 nm | Nehalem | Clarksfield | 0x106Ex | 0x1E | Core™ i7 | i7-7xxQM, i7-8xxQM | |
Lynnfield | Core™ i5 | i5-7xx, i5-7xxS | |||||
Jasper Forest | Xeon™ 5000 | LC55xx, EC55xx | |||||
Bloomfield | 0x106Ax | 0x1A | Core™ i7 Extreme | i7-965/975 | |||
Nehalem-EP | Xeon™ 5000 | L55xx, E55xx, X55xx, W55xx | |||||
Nehalem-EX | 0x206Ex | 0x2E | Xeon™ 7000 | L75xx, E75xx, X75xx | |||
Penryn | Yorkfield | 0x1067x | 0x17 | Core™ 2 Quad | Q9xxx, Q8xxx, !9xxxS | ||
Wolfdale | Celeron™ Desktop | E3xxx | |||||
Penryn | Core™ 2 Duo Mobile | P7xxx, P9xxx, SL9xxx | |||||
Harpertown (DP) | Xeon™ 5000 | L54xx, E54xx, X54xx | |||||
Dunnington (MP) | 0x106Dx | 0x1D | Xeon™ 7000 | L74xx, E74xx, Q7xx | |||
65 nm | Merom | Clovertown | 0x006Fx | 0x0F | Xeon™ 5000 | E53xx, L53xx, X53xx | |
Kentsfield | Xeon™ 3000 | X32xx | |||||
Conroe | Xeon™ 3000 | 30xx | |||||
Merom | Core™ 2 Duo M | L7xxx,T5xxx,T7xxx,U7xxx | |||||
Woodcrest | Xeon™ 5000 | 51xx | |||||
Merom | 0x1066x | 0x16 | Celeron™ Desktop | 4xx | |||
Presler | Cedar Mill | 0x0066x | 0x0F | 0x06 | Pentium™ 4 | 3xx, 6xx | |
Presler | Pentium™ D | 9xx | |||||
90 nm | Prescott | Nocona | 0x0063x | 0x03/ | Xeon™ | ||
Prescott | Celeron™ D | 3xx | |||||
Dothan | Dothan | 0x006Dx | 0x06 | 0x0D | Celeron™ M | 3xx |
Atom™ Architectures and Processors
This table includes the Atom™ processors on 45nm and later process technology. Please read and understand these important disclaimersprior to use.
Process | Microarchitecture | Processor | Platform | Processor | Family | Model | Intel® Brand | Intel® Brand |
---|---|---|---|---|---|---|---|---|
32 nm | Atom™ | Cedarview | Cedar Trail | 0x0366x | 0x06 | 0x36 | Atom™ | N2000 series: N26xx, N28xx |
45 nm | Lincroft | Oak Trail | 0x0266x | 0x26 | Z6xx (single core) | |||
Pineview | Pine Trail | 0x016Cx | 0x1C | N4xx, D4xx (single core) | ||||
Silverthorne | any | Z5xx |
Information in this article is intended as a convenient summary of the contents of the "Intel® Processor Identification and the CPUID Instruction" application note and the official Intel® product information source.
In case of discrepancy, the information in the original application note and product information source supersede the contents of this article. (Please notify the author of any such discrepancy).
Please consult Section 2: Usage Guidelines of the "Intel® Processor Identification and the CPUID Instruction" for the proper use of CPUID.
Intel® processor numbers are not a measure of performance. Processor numbers differentiate features within each processor family, not across different processor families. See http://www.intel.com/products/processor_number for details.
All information provided is subject to change at any time, without notice. Intel may make changes to manufacturing life cycle, specifications, and product descriptions at any time, without notice. The information herein is provided "as-is" and Intel does not make any representations or warranties whatsoever regarding accuracy of the information, nor on the product features, availability, functionality, or compatibility of the products listed. Please contact system vendor for more information on specific products or systems.
[1] For an example of interrogating CPUID to verify features please read Using CPUID to Detect the presence of SSE 4.1 and SSE 4.2 Instruction Sets
[2] In Linux*-based operating systems you can type ‘cat /proc/cpuinfo' to obtain the processor family and model numbers (note they are formatted in decimal, while the tables in this article containhexadecimal formatting of these numbers).