linux运维、架构之路-Kubernetes集群部署TLS双向认证

最新推荐文章于 2024-06-14 17:37:13 发布

weixin_30783913

最新推荐文章于 2024-06-14 17:37:13 发布

阅读量250

点赞数

文章标签：运维操作系统 json

原文链接：http://www.cnblogs.com/yanxinjiang/p/9647545.html

版权

一、kubernetes的认证授权

Kubernetes集群的所有操作基本上都是通过kube-apiserver这个组件进行的，它提供HTTP RESTful形式的API供集群内外客户端调用。需要注意的是：认证授权过程只存在HTTPS形式的API中。也就是说，如果客户端使用HTTP连接到kube-apiserver，那么是不会进行认证授权的。所以说，可以这么设置，在集群内部组件间通信使用HTTP，集群外部就使用HTTPS，这样既增加了安全性，也不至于太复杂。

Kubernetes 提供了多种安全认证机制，其中对于集群通讯间可采用 TLS(https) 双向认证机制，也可采用基于 Token 或用户名密码的单向 tls 认证。k8s一般在内网部署，采用私有 IP 地址进行通讯，权威CA只能签署域名证书，我们这里采用自建CA。

1、k8s集群组件版本、环境

Kubernetes 1.12.3
Docker 18.09.0-ce
Etcd 3.3.10
Flanneld 0.10.0
插件：
Coredns
Dashboard
Heapster (influxdb、grafana)
Metrics-Server
EFK (elasticsearch、fluentd、kibana)
镜像仓库：
docker registry
harbor

2、集群架构图

3、系统环境

[root@k8s-master ~]# cat /etc/redhat-release 
CentOS Linux release 7.2.1511 (Core) 
[root@k8s-master ~]# uname -r
3.10.0-327.el7.x86_64
[root@k8s-master ~]# systemctl status firewalld.service 
● firewalld.service - firewalld - dynamic firewall daemon
   Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)
   Active: inactive (dead)
[root@k8s-master ~]# getenforce 
Disabled

4、服务器规划

节点及功能	主机名	IP
Master、etcd、registry	K8s-node-1	10.0.0.206
Node1 kube-proxy、kubelet	K8s-node-2	10.0.0.207
Node2 kube-proxy、kubelet	K8s-node-3	10.0.0.208

5、统一hosts解析

cat >> /etc/hosts <<EOF
10.0.0.206  K8s-node-1      K8s-node-1
10.0.0.207  K8s-node-2      K8s-node-2
10.0.0.208  K8s-node-3      K8s-node-3
EOF

6、免密码 ssh 登录其它节点

ssh-keygen -t rsa
ssh-copy-id root@K8s-node-1
ssh-copy-id root@K8s-node-2
ssh-copy-id root@K8s-node-3

7、环境变量设置

echo 'PATH=/opt/k8s/bin:$PATH' >>/root/.bashrc

8、安装依赖包

yum install -y epel-release
yum install -y conntrack ipvsadm ipset jq iptables curl sysstat libseccomp
/usr/sbin/modprobe ip_vs

9、优化内核

cat > kubernetes.conf <<EOF
net.bridge.bridge-nf-call-iptables=1
net.bridge.bridge-nf-call-ip6tables=1
net.ipv4.ip_forward=1
net.ipv4.tcp_tw_recycle=0
vm.swappiness=0 # 禁止使用 swap 空间，只有当系统 OOM 时才允许使用它
vm.overcommit_memory=1 # 不检查物理内存是否够用
vm.panic_on_oom=0 # 开启 OOM
fs.inotify.max_user_instances=8192
fs.inotify.max_user_watches=1048576
fs.file-max=52706963
fs.nr_open=52706963
net.ipv6.conf.all.disable_ipv6=1
net.netfilter.nf_conntrack_max=2310720
EOF
cp kubernetes.conf  /etc/sysctl.d/kubernetes.conf
sysctl -p /etc/sysctl.d/kubernetes.conf

10、时间同步

yum -y install ntp ntpdate
[root@k8s-master ~]# crontab -l
#sync time
5 * * * * /usr/sbin/ntpdate cn.pool.ntp.org >/dev/null 2>&1

11、设置 rsyslogd 和 systemd journald

systemd的journald是Centos7缺省的日志记录工具，它记录了所有系统、内核、Service Unit 的日志。相比 systemd，journald 记录的日志有如下优势：
可以记录到内存或文件系统；(默认记录到内存，对应的位置为 /run/log/jounal)
可以限制占用的磁盘空间、保证磁盘剩余空间；
可以限制日志文件大小、保存的时间；
journald 默认将日志转发给 rsyslog，这会导致日志写了多份，/var/log/messages 中包含了太多无关日志，不方便后续查看，同时也影响系统性能。

mkdir /var/log/journal # 持久化保存日志的目录
mkdir /etc/systemd/journald.conf.d
cat > /etc/systemd/journald.conf.d/99-prophet.conf <<EOF
[Journal]
# 持久化保存到磁盘
Storage=persistent

# 压缩历史日志
Compress=yes

SyncIntervalSec=5m
RateLimitInterval=30s
RateLimitBurst=1000

# 最大占用空间 10G
SystemMaxUse=10G

# 单日志文件最大 200M
SystemMaxFileSize=200M

# 日志保存时间 2 周
MaxRetentionSec=2week

# 不将日志转发到 syslog
ForwardToSyslog=no
EOF
systemctl restart systemd-journald

12、创建相关目录

mkdir -p  /opt/k8s/{bin,work} /etc/kubernetes/cert /etc/etcd/cert

13、分发集群环境变量定义脚本

#!/usr/bin/bash

# 生成 EncryptionConfig 所需的加密 key
export ENCRYPTION_KEY=$(head -c 32 /dev/urandom | base64)

# 集群各机器 IP 数组
export NODE_IPS=(10.0.0.206 10.0.0.207 10.0.0.208)

# 集群各 IP 对应的 主机名数组
export NODE_NAMES=(K8s-node-1 K8s-node-2 K8s-node-3 )

# etcd 集群服务地址列表
export ETCD_ENDPOINTS="https://10.0.0.206:2379,https://10.0.0.207:2379,https://10.0.0.208:2379"

# etcd 集群间通信的 IP 和端口
export ETCD_NODES="K8s-node-1=https://10.0.0.206:2380,K8s-node-2=https://10.0.0.207:2380,K8s-node-3=https://10.0.0.208:2380"

# kube-apiserver 的反向代理(kube-nginx)地址端口
export KUBE_APISERVER="https://127.0.0.1:8443"

# 节点间互联网络接口名称
export IFACE="eth0"

# etcd 数据目录
export ETCD_DATA_DIR="/data/k8s/etcd/data"

# etcd WAL 目录，建议是 SSD 磁盘分区，或者和 ETCD_DATA_DIR 不同的磁盘分区
export ETCD_WAL_DIR="/data/k8s/etcd/wal"

# k8s 各组件数据目录
export K8S_DIR="/data/k8s/k8s"

# docker 数据目录
export DOCKER_DIR="/data/k8s/docker"

## 以下参数一般不需要修改

# TLS Bootstrapping 使用的 Token，可以使用命令 head -c 16 /dev/urandom | od -An -t x | tr -d ' ' 生成
BOOTSTRAP_TOKEN="41f7e4ba8b7be874fcff18bf5cf41a7c"

# 最好使用 当前未用的网段 来定义服务网段和 Pod 网段

# 服务网段，部署前路由不可达，部署后集群内路由可达(kube-proxy 保证)
SERVICE_CIDR="10.254.0.0/16"

# Pod 网段，建议 /16 段地址，部署前路由不可达，部署后集群内路由可达(flanneld 保证)
CLUSTER_CIDR="172.30.0.0/16"

# 服务端口范围 (NodePort Range)
export NODE_PORT_RANGE="30000-32767"

# flanneld 网络配置前缀
export FLANNEL_ETCD_PREFIX="/kubernetes/network"

# kubernetes 服务 IP (一般是 SERVICE_CIDR 中第一个IP)
export CLUSTER_KUBERNETES_SVC_IP="10.254.0.1"

# 集群 DNS 服务 IP (从 SERVICE_CIDR 中预分配)
export CLUSTER_DNS_SVC_IP="10.254.0.2"

# 集群 DNS 域名（末尾不带点号）
export CLUSTER_DNS_DOMAIN="cluster.local"

# 将二进制目录 /opt/k8s/bin 加到 PATH 中
export PATH=/opt/k8s/bin:$PATH

全局变量定义脚本拷贝到所有节点的 /opt/k8s/bin 目录

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp /opt/k8s/bin/environment.sh root@${node_ip}:/opt/k8s/bin/
    ssh root@${node_ip} "chmod +x /opt/k8s/bin/*"
  done

至此，基础环境准备完毕，如没有特殊说明的话，接下来所有的操作都在K8s-node-1执行然后分发到其它节点

二、创建CA 证书和密钥

安装CFSSL

mkdir -p /opt/k8s/cert && cd /opt/k8s
wget https://pkg.cfssl.org/R1.2/cfssl_linux-amd64
mv cfssl_linux-amd64 /opt/k8s/bin/cfssl

wget https://pkg.cfssl.org/R1.2/cfssljson_linux-amd64
mv cfssljson_linux-amd64 /opt/k8s/bin/cfssljson

wget https://pkg.cfssl.org/R1.2/cfssl-certinfo_linux-amd64
mv cfssl-certinfo_linux-amd64 /opt/k8s/bin/cfssl-certinfo

chmod +x /opt/k8s/bin/*
export PATH=/opt/k8s/bin:$PATH

①创建根证书CA

CA 证书是集群所有节点共享的，只需要创建一个 CA 证书，后续创建的所有证书都由它签名

创建配置文件

cd /opt/k8s/work
cat > ca-config.json <<EOF
{
  "signing": {
    "default": {
      "expiry": "87600h"
    },
    "profiles": {
      "kubernetes": {
        "usages": [
            "signing",
            "key encipherment",
            "server auth",
            "client auth"
        ],
        "expiry": "87600h"
      }
    }
  }
}
EOF

signing：表示该证书可用于签名其它证书，生成的 ca.pem 证书中 CA=TRUE；
server auth：表示 client 可以用该该证书对 server 提供的证书进行验证；
client auth：表示 server 可以用该该证书对 client 提供的证书进行验证；

创建证书签名请求文件

cd /opt/k8s/work
cat > ca-csr.json <<EOF
{
  "CN": "kubernetes",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "BeiJing",
      "L": "BeiJing",
      "O": "k8s",
      "OU": "4Paradigm"
    }
  ]
}
EOF

②生成CA 证书和私钥

cd /opt/k8s/work
cfssl gencert -initca ca-csr.json | cfssljson -bare ca
ls ca*

③分发证书文件

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh # 导入 NODE_IPS 环境变量
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "mkdir -p /etc/kubernetes/cert"
    scp ca*.pem ca-config.json root@${node_ip}:/etc/kubernetes/cert
  done

三、部署 kubectl

1、下载和分发 kubectl 二进制文件

①下载解压

cd /opt/k8s/work
wget https://dl.k8s.io/v1.12.3/kubernetes-client-linux-amd64.tar.gz
tar -xzvf kubernetes-client-linux-amd64.tar.gz

②分发到所有使用kubectl节点

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp kubernetes/client/bin/kubectl root@${node_ip}:/opt/k8s/bin/
    ssh root@${node_ip} "chmod +x /opt/k8s/bin/*"
  done

2、创建 admin 证书和私钥

kubectl 与 apiserver https 安全端口通信，apiserver 对提供的证书进行认证和授权。
kubectl 作为集群的管理工具，需要被授予最高权限。这里创建具有最高权限的 admin 证书。

①创建证书签名请求

cd /opt/k8s/work
cat > admin-csr.json <<EOF
{
  "CN": "admin",
  "hosts": [],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "BeiJing",
      "L": "BeiJing",
      "O": "system:masters",
      "OU": "4Paradigm"
    }
  ]
}
EOF

②生成证书和私钥

cd /opt/k8s/work
cfssl gencert -ca=/opt/k8s/work/ca.pem \
  -ca-key=/opt/k8s/work/ca-key.pem \
  -config=/opt/k8s/work/ca-config.json \
  -profile=kubernetes admin-csr.json | cfssljson -bare admin
ls admin*

3、创建 kubeconfig 文件

①kubeconfig 为 kubectl 的配置文件

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh

# 设置集群参数
kubectl config set-cluster kubernetes \
  --certificate-authority=/opt/k8s/work/ca.pem \
  --embed-certs=true \
  --server=${KUBE_APISERVER} \
  --kubeconfig=kubectl.kubeconfig

# 设置客户端认证参数
kubectl config set-credentials admin \
  --client-certificate=/opt/k8s/work/admin.pem \
  --client-key=/opt/k8s/work/admin-key.pem \
  --embed-certs=true \
  --kubeconfig=kubectl.kubeconfig

# 设置上下文参数
kubectl config set-context kubernetes \
  --cluster=kubernetes \
  --user=admin \
  --kubeconfig=kubectl.kubeconfig
  
# 设置默认上下文
kubectl config use-context kubernetes --kubeconfig=kubectl.kubeconfig

--certificate-authority：验证 kube-apiserver 证书的根证书；
--client-certificate、--client-key：刚生成的 admin 证书和私钥，连接 kube-apiserver 时使用；
--embed-certs=true：将 ca.pem 和 admin.pem 证书内容嵌入到生成的 kubectl.kubeconfig 文件中(不加时，写入的是证书文件路径)

②分发 kubeconfig 文件

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "mkdir -p ~/.kube"
    scp kubectl.kubeconfig root@${node_ip}:~/.kube/config
  done

保存到用户的 ~/.kube/config 文件

四、部署高可用etcd 集群

1、下载和分发 etcd 二进制文件

①下载解压

cd /opt/k8s/work
wget https://github.com/coreos/etcd/releases/download/v3.3.10/etcd-v3.3.10-linux-amd64.tar.gz
tar -xvf etcd-v3.3.10-linux-amd64.tar.gz

②分发到集群所有节点

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp etcd-v3.3.10-linux-amd64/etcd* root@${node_ip}:/opt/k8s/bin
    ssh root@${node_ip} "chmod +x /opt/k8s/bin/*"
  done

2、创建 etcd 证书和私钥

①创建证书签名请求

cd /opt/k8s/work
cat > etcd-csr.json <<EOF
{
  "CN": "etcd",
  "hosts": [
    "127.0.0.1",
    "10.0.0.206",
    "10.0.0.207",
    "10.0.0.208"
  ],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "BeiJing",
      "L": "BeiJing",
      "O": "k8s",
      "OU": "4Paradigm"
    }
  ]
}
EOF

②生成证书和私钥

cd /opt/k8s/work
cfssl gencert -ca=/opt/k8s/work/ca.pem \
    -ca-key=/opt/k8s/work/ca-key.pem \
    -config=/opt/k8s/work/ca-config.json \
    -profile=kubernetes etcd-csr.json | cfssljson -bare etcd
ls etcd*pem

③分发生成的证书和私钥到各 etcd 节点

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "mkdir -p /etc/etcd/cert"
    scp etcd*.pem root@${node_ip}:/etc/etcd/cert/
  done

3、创建etcd 的systemd unit模板文件

①创建模板文件

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
cat > etcd.service.template <<EOF
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
Documentation=https://github.com/coreos

[Service]
Type=notify
WorkingDirectory=${ETCD_DATA_DIR}
ExecStart=/opt/k8s/bin/etcd \\
  --data-dir=${ETCD_DATA_DIR} \\
  --wal-dir=${ETCD_WAL_DIR} \\
  --name=##NODE_NAME## \\
  --cert-file=/etc/etcd/cert/etcd.pem \\
  --key-file=/etc/etcd/cert/etcd-key.pem \\
  --trusted-ca-file=/etc/kubernetes/cert/ca.pem \\
  --peer-cert-file=/etc/etcd/cert/etcd.pem \\
  --peer-key-file=/etc/etcd/cert/etcd-key.pem \\
  --peer-trusted-ca-file=/etc/kubernetes/cert/ca.pem \\
  --peer-client-cert-auth \\
  --client-cert-auth \\
  --listen-peer-urls=https://##NODE_IP##:2380 \\
  --initial-advertise-peer-urls=https://##NODE_IP##:2380 \\
  --listen-client-urls=https://##NODE_IP##:2379,http://127.0.0.1:2379 \\
  --advertise-client-urls=https://##NODE_IP##:2379 \\
  --initial-cluster-token=etcd-cluster-0 \\
  --initial-cluster=${ETCD_NODES} \\
  --initial-cluster-state=new \\
  --auto-compaction-mode=periodic \\
  --auto-compaction-retention=1 \\
  --max-request-bytes=33554432 \\
  --quota-backend-bytes=6442450944 \\
  --heartbeat-interval=250 \\
  --election-timeout=2000
Restart=on-failure
RestartSec=5
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
EOF

WorkingDirectory、--data-dir：指定工作目录和数据目录为 ${ETCD_DATA_DIR}，需在启动服务前创建这个目录；
--wal-dir：指定 wal 目录，为了提高性能，一般使用 SSD 或者和 --data-dir 不同的磁盘；
--name：指定节点名称，当 --initial-cluster-state 值为 new 时，--name 的参数值必须位于 --initial-cluster列表中；
--cert-file、--key-file：etcd server 与 client 通信时使用的证书和私钥；
--trusted-ca-file：签名 client 证书的 CA 证书，用于验证 client 证书；
--peer-cert-file、--peer-key-file：etcd 与 peer 通信使用的证书和私钥；
--peer-trusted-ca-file：签名 peer 证书的 CA 证书，用于验证 peer 证书；

②替换模板文件中的变量，为各节点创建 systemd unit 文件

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for (( i=0; i < 3; i++ ))
  do
    sed -e "s/##NODE_NAME##/${NODE_NAMES[i]}/" -e "s/##NODE_IP##/${NODE_IPS[i]}/" etcd.service.template > etcd-${NODE_IPS[i]}.service 
  done
ls *.service

③分发节点

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp etcd-${node_ip}.service root@${node_ip}:/etc/systemd/system/etcd.service
  done

4、启动etcd服务

①启动etcd集群服务

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "mkdir -p ${ETCD_DATA_DIR} ${ETCD_WAL_DIR}"
    ssh root@${node_ip} "systemctl daemon-reload && systemctl enable etcd && systemctl restart etcd " &
  done

必须创建 etcd 数据目录和工作目录;
etcd 进程首次启动时会等待其它节点的 etcd 加入集群，命令 systemctl start etcd 会卡住一段时间，为正常现象

②检查集群启动状态

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "systemctl status etcd|grep Active"
  done

③查看etcd日志

journalctl -u etcd

④验证集群

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ETCDCTL_API=3 /opt/k8s/bin/etcdctl \
    --endpoints=https://${node_ip}:2379 \
    --cacert=/opt/k8s/work/ca.pem \
    --cert=/etc/etcd/cert/etcd.pem \
    --key=/etc/etcd/cert/etcd-key.pem endpoint health
  done

输出：

>>> 10.0.0.206
https://10.0.0.206:2379 is healthy: successfully committed proposal: took = 4.622709ms
>>> 10.0.0.207
https://10.0.0.207:2379 is healthy: successfully committed proposal: took = 3.621197ms
>>> 10.0.0.208
https://10.0.0.208:2379 is healthy: successfully committed proposal: took = 3.186656ms

查看当前的 leader

source /opt/k8s/bin/environment.sh
ETCDCTL_API=3 /opt/k8s/bin/etcdctl \
  -w table --cacert=/opt/k8s/work/ca.pem \
  --cert=/etc/etcd/cert/etcd.pem \
  --key=/etc/etcd/cert/etcd-key.pem \
  --endpoints=${ETCD_ENDPOINTS} endpoint status

输出：

+-------------------------+------------------+---------+---------+-----------+-----------+------------+
| ENDPOINT | ID | VERSION | DB SIZE | IS LEADER | RAFT TERM | RAFT INDEX |
+-------------------------+------------------+---------+---------+-----------+-----------+------------+
| https://10.0.0.206:2379 | 23d31ba59ca79fa0 | 3.3.10 | 20 kB | false | 2 | 8 |
| https://10.0.0.207:2379 | 2323451019f6428d | 3.3.10 | 20 kB | false | 2 | 8 |
| https://10.0.0.208:2379 | 7a42012c95def99e | 3.3.10 | 20 kB | true | 2 | 8 |
+-------------------------+------------------+---------+---------+-----------+-----------+------------+

五、部署 flannel 网络

1、下载和分发 flanneld 文件

①下载解压

cd /opt/k8s/work
mkdir flannel
wget https://github.com/coreos/flannel/releases/download/v0.10.0/flannel-v0.10.0-linux-amd64.tar.gz
tar -xzvf flannel-v0.10.0-linux-amd64.tar.gz -C flannel

②分发 flanneld 到集群所有节点

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp flannel/{flanneld,mk-docker-opts.sh} root@${node_ip}:/opt/k8s/bin/
    ssh root@${node_ip} "chmod +x /opt/k8s/bin/*"
  done

2、创建 flannel 证书和私钥

①创建证书签名请求

cd /opt/k8s/work
cat > flanneld-csr.json <<EOF
{
  "CN": "flanneld",
  "hosts": [],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "BeiJing",
      "L": "BeiJing",
      "O": "k8s",
      "OU": "4Paradigm"
    }
  ]
}
EOF

②生成证书和私钥

cfssl gencert -ca=/opt/k8s/work/ca.pem \
  -ca-key=/opt/k8s/work/ca-key.pem \
  -config=/opt/k8s/work/ca-config.json \
  -profile=kubernetes flanneld-csr.json | cfssljson -bare flanneld
ls flanneld*pem

③分发证书和私钥到集群节点

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "mkdir -p /etc/flanneld/cert"
    scp flanneld*.pem root@${node_ip}:/etc/flanneld/cert
  done

④向etcd 写入集群Pod网段信息

注意：本步骤只需执行一次

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
etcdctl \
  --endpoints=${ETCD_ENDPOINTS} \
  --ca-file=/opt/k8s/work/ca.pem \
  --cert-file=/opt/k8s/work/flanneld.pem \
  --key-file=/opt/k8s/work/flanneld-key.pem \
  set ${FLANNEL_ETCD_PREFIX}/config '{"Network":"'${CLUSTER_CIDR}'", "SubnetLen": 21, "Backend": {"Type": "vxlan"}}'

flanneld 当前版本 (v0.10.0) 不支持 etcd v3，故使用 etcd v2 API 写入配置 key 和网段数据；
写入的 Pod 网段 ${CLUSTER_CIDR} 地址段如 /16 必须小于 SubnetLen，必须与 kube-controller-manager 的 --cluster-cidr 参数值一致

3、创建 flanneld的systemd unit 文件

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
cat > flanneld.service << EOF
[Unit]
Description=Flanneld overlay address etcd agent
After=network.target
After=network-online.target
Wants=network-online.target
After=etcd.service
Before=docker.service

[Service]
Type=notify
ExecStart=/opt/k8s/bin/flanneld \\
  -etcd-cafile=/etc/kubernetes/cert/ca.pem \\
  -etcd-certfile=/etc/flanneld/cert/flanneld.pem \\
  -etcd-keyfile=/etc/flanneld/cert/flanneld-key.pem \\
  -etcd-endpoints=${ETCD_ENDPOINTS} \\
  -etcd-prefix=${FLANNEL_ETCD_PREFIX} \\
  -iface=${IFACE} \\
  -ip-masq
ExecStartPost=/opt/k8s/bin/mk-docker-opts.sh -k DOCKER_NETWORK_OPTIONS -d /run/flannel/docker
Restart=always
RestartSec=5
StartLimitInterval=0

[Install]
WantedBy=multi-user.target
RequiredBy=docker.service
EOF

①分发 flanneld systemd unit 文件到集群节点

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp flanneld.service root@${node_ip}:/etc/systemd/system/
  done

②启动 flanneld 服务

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "systemctl daemon-reload && systemctl enable flanneld && systemctl restart flanneld"
  done

③检查集群状态

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "systemctl status flanneld|grep Active"
  done

④如有报错查看日志

journalctl -u flanneld

⑤检查分配给各flanneld的Pod 网段信息

source /opt/k8s/bin/environment.sh
etcdctl \
  --endpoints=${ETCD_ENDPOINTS} \
  --ca-file=/etc/kubernetes/cert/ca.pem \
  --cert-file=/etc/flanneld/cert/flanneld.pem \
  --key-file=/etc/flanneld/cert/flanneld-key.pem \
  get ${FLANNEL_ETCD_PREFIX}/config

⑥验证各节点能通过 Pod 网段互通

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh ${node_ip} "/usr/sbin/ip addr show flannel.1|grep -w inet"
  done

输出：

>>> 10.0.0.206
    inet 172.30.168.0/32 scope global flannel.1
>>> 10.0.0.207
    inet 172.30.160.0/32 scope global flannel.1
>>> 10.0.0.208
    inet 172.30.112.0/32 scope global flannel.1

六、kube-apiserver 高可用之 nginx 代理

1、下载和编译 nginx

cd /opt/k8s/work
wget http://nginx.org/download/nginx-1.15.3.tar.gz
tar -xzvf nginx-1.15.3.tar.gz

cd /opt/k8s/work/nginx-1.15.3
mkdir nginx-prefix
./configure --with-stream --without-http --prefix=$(pwd)/nginx-prefix --without-http_uwsgi_module --without-http_scgi_module --without-http_fastcgi_module

cd /opt/k8s/work/nginx-1.15.3
make && make install

--with-stream：开启 4 层透明转发(TCP Proxy)功能；
--without-xxx：关闭所有其他功能，这样生成的动态链接二进制程序依赖最小

2、安装和部署 nginx

①创建目录结构

mkdir -p /opt/k8s/kube-nginx/{conf,logs,sbin}

②拷贝文件

cp /opt/k8s/work/nginx-1.15.3/nginx-prefix/sbin/nginx  /opt/k8s/kube-nginx/sbin/kube-nginx
chmod a+x /opt/k8s/kube-nginx/sbin/*

③配置Nginx转发

cat > /opt/k8s/kube-nginx/conf/kube-nginx.conf <<EOF
worker_processes 1;

events {
    worker_connections  1024;
}

stream {
    upstream backend {
        hash $remote_addr consistent;
        server 10.0.0.206:6443          max_fails=3 fail_timeout=30s;
        server 10.0.0.207:6443          max_fails=3 fail_timeout=30s;
        server 10.0.0.208:6443          max_fails=3 fail_timeout=30s;
    }

    server {
        listen 127.0.0.1:8443;
        proxy_connect_timeout 1s;
        proxy_pass backend;
    }
}
EOF

④配置 systemd unit 文件，启动服务

cat > /etc/systemd/system/kube-nginx.service <<EOF
[Unit]
Description=kube-apiserver nginx proxy
After=network.target
After=network-online.target
Wants=network-online.target

[Service]
Type=forking
ExecStartPre=/opt/k8s/kube-nginx/sbin/kube-nginx -c /opt/k8s/kube-nginx/conf/kube-nginx.conf -p /opt/k8s/kube-nginx -t
ExecStart=/opt/k8s/kube-nginx/sbin/kube-nginx -c /opt/k8s/kube-nginx/conf/kube-nginx.conf -p /opt/k8s/kube-nginx
ExecReload=/opt/k8s/kube-nginx/sbin/kube-nginx -c /opt/k8s/kube-nginx/conf/kube-nginx.conf -p /opt/k8s/kube-nginx -s reload
PrivateTmp=true
Restart=always
RestartSec=5
StartLimitInterval=0
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
EOF

启动 kube-nginx 服务

systemctl daemon-reload && systemctl enable kube-nginx && systemctl restart kube-nginx

⑤检查 kube-nginx 运行状态

systemctl status kube-nginx |grep 'Active:'

⑥如有报错，查看日志

journalctl -u kube-nginx

七、部署 master 节点

kubernetes master 节点运行如下组件：

kube-apiserver
kube-scheduler
kube-controller-manager
kube-nginx

1、下载二进制文件

cd /opt/k8s/work
wget https://dl.k8s.io/v1.12.3/kubernetes-server-linux-amd64.tar.gz
tar -xzvf kubernetes-server-linux-amd64.tar.gz
cd kubernetes
tar -xzvf  kubernetes-src.tar.gz

分发文件到集群节点

cd /opt/k8s/work/kubernetes
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp server/bin/* root@${node_ip}:/opt/k8s/bin/
    ssh root@${node_ip} "chmod +x /opt/k8s/bin/*"
  done

2、部署高可用 kube-apiserver 集群

①创建 kubernetes 证书和私钥

创建证书签名请求

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
cat > kubernetes-csr.json <<EOF
{
  "CN": "kubernetes",
  "hosts": [
    "127.0.0.1",
    "10.0.0.206",
    "10.0.0.207",
    "10.0.0.208",
    "${CLUSTER_KUBERNETES_SVC_IP}",
    "kubernetes",
    "kubernetes.default",
    "kubernetes.default.svc",
    "kubernetes.default.svc.cluster",
    "kubernetes.default.svc.cluster.local"
  ],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "BeiJing",
      "L": "BeiJing",
      "O": "k8s",
      "OU": "4Paradigm"
    }
  ]
}
EOF

hosts 字段指定授权使用该证书的 IP 或域名列表，这里列出了 VIP 、apiserver 节点 IP、kubernetes 服务 IP 和域名；
域名最后字符不能是 .(如不能为 kubernetes.default.svc.cluster.local.)，否则解析时失败，提示： x509: cannot parse dnsName "kubernetes.default.svc.cluster.local."；
如果使用非 cluster.local 域名，如 opsnull.com，则需要修改域名列表中的最后两个域名为：kubernetes.default.svc.opsnull、kubernetes.default.svc.opsnull.com
kubernetes 服务 IP 是 apiserver 自动创建的，一般是 --service-cluster-ip-range 参数指定的网段的第一个IP，后续可以通过如下命令获取：

生成证书和私钥

cfssl gencert -ca=/opt/k8s/work/ca.pem \
  -ca-key=/opt/k8s/work/ca-key.pem \
  -config=/opt/k8s/work/ca-config.json \
  -profile=kubernetes kubernetes-csr.json | cfssljson -bare kubernetes
ls kubernetes*pem

分发证书和私钥文件到master节点

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "mkdir -p /etc/kubernetes/cert"
    scp kubernetes*.pem root@${node_ip}:/etc/kubernetes/cert/
  done

创建加密配置文件

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
cat > encryption-config.yaml <<EOF
kind: EncryptionConfig
apiVersion: v1
resources:
  - resources:
      - secrets
    providers:
      - aescbc:
          keys:
            - name: key1
              secret: ${ENCRYPTION_KEY}
      - identity: {}
EOF

分发加密配置文件到集群节点的 /etc/kubernetes 目录下

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp encryption-config.yaml root@${node_ip}:/etc/kubernetes/
  done

②创建 kube-apiserver systemd unit 模板文件

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
cat > kube-apiserver.service.template <<EOF
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=network.target

[Service]
WorkingDirectory=${K8S_DIR}/kube-apiserver
ExecStart=/opt/k8s/bin/kube-apiserver \\
  --enable-admission-plugins=Initializers,NamespaceLifecycle,NodeRestriction,LimitRanger,ServiceAccount,DefaultStorageClass,ResourceQuota \\
  --anonymous-auth=false \\
  --experimental-encryption-provider-config=/etc/kubernetes/encryption-config.yaml \\
  --advertise-address=##NODE_IP## \\
  --bind-address=##NODE_IP## \\
  --insecure-port=0 \\
  --authorization-mode=Node,RBAC \\
  --runtime-config=api/all \\
  --enable-bootstrap-token-auth \\
  --service-cluster-ip-range=${SERVICE_CIDR} \\
  --service-node-port-range=${NODE_PORT_RANGE} \\
  --tls-cert-file=/etc/kubernetes/cert/kubernetes.pem \\
  --tls-private-key-file=/etc/kubernetes/cert/kubernetes-key.pem \\
  --client-ca-file=/etc/kubernetes/cert/ca.pem \\
  --kubelet-certificate-authority=/etc/kubernetes/cert/ca.pem \\
  --kubelet-client-certificate=/etc/kubernetes/cert/kubernetes.pem \\
  --kubelet-client-key=/etc/kubernetes/cert/kubernetes-key.pem \\
  --kubelet-https=true \\
  --service-account-key-file=/etc/kubernetes/cert/ca.pem \\
  --etcd-cafile=/etc/kubernetes/cert/ca.pem \\
  --etcd-certfile=/etc/kubernetes/cert/kubernetes.pem \\
  --etcd-keyfile=/etc/kubernetes/cert/kubernetes-key.pem \\
  --etcd-servers=${ETCD_ENDPOINTS} \\
  --enable-swagger-ui=true \\
  --allow-privileged=true \\
  --max-mutating-requests-inflight=2000 \\
  --max-requests-inflight=4000 \\
  --apiserver-count=3 \\
  --audit-log-maxage=30 \\
  --audit-log-maxbackup=3 \\
  --audit-log-maxsize=100 \\
  --audit-log-path=${K8S_DIR}/kube-apiserver/audit.log \\
  --event-ttl=168h \\
  --logtostderr=true \\
  --v=2
Restart=on-failure
RestartSec=5
Type=notify
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
EOF

③创建和分发 kube-apiserver systemd unit 文件

为各节点创建 systemd unit 文件

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for (( i=0; i < 3; i++ ))
  do
    sed -e "s/##NODE_NAME##/${NODE_NAMES[i]}/" -e "s/##NODE_IP##/${NODE_IPS[i]}/" kube-apiserver.service.template > kube-apiserver-${NODE_IPS[i]}.service 
  done
ls kube-apiserver*.service

分发生成的 systemd unit 文件

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp kube-apiserver-${node_ip}.service root@${node_ip}:/etc/systemd/system/kube-apiserver.service
  done

④启动 kube-apiserver 服务

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "mkdir -p ${K8S_DIR}/kube-apiserver"
    ssh root@${node_ip} "systemctl daemon-reload && systemctl enable kube-apiserver && systemctl restart kube-apiserver"
  done

检查 kube-apiserver 运行状态

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "systemctl status kube-apiserver |grep 'Active:'"
  done

如启动报错，查看日志

journalctl -u kube-apiserver

⑤检查集群信息

[root@k8s-node-1 work]# kubectl cluster-info
Kubernetes master is running at https://127.0.0.1:8443

To further debug and diagnose cluster problems, use 'kubectl cluster-info dump'.
[root@k8s-node-1 work]# kubectl get all --all-namespaces
NAMESPACE   NAME                 TYPE        CLUSTER-IP   EXTERNAL-IP   PORT(S)   AGE
default     service/kubernetes   ClusterIP   10.254.0.1   <none>        443/TCP   3m37s
[root@k8s-node-1 work]# kubectl get componentstatuses
NAME                 STATUS      MESSAGE                                                                                     ERROR
scheduler            Unhealthy   Get http://127.0.0.1:10251/healthz: dial tcp 127.0.0.1:10251: connect: connection refused   
controller-manager   Unhealthy   Get http://127.0.0.1:10252/healthz: dial tcp 127.0.0.1:10252: connect: connection refused   
etcd-2               Healthy     {"health":"true"}                                                                           
etcd-1               Healthy     {"health":"true"}                                                                           
etcd-0               Healthy     {"health":"true"}

⑥检查 kube-apiserver 监听的端口

[root@k8s-node-1 ~]# netstat -lnpt|grep kube
tcp        0      0 10.0.0.206:6443         0.0.0.0:*               LISTEN      26023/kube-apiserve

⑦授予 kubernetes证书访问 kubelet API 的权限

在执行kubectl exec、run、logs 等命令时，apiserver 会转发到kubelet。这里定义 RBAC 规则，授权 apiserver 调用 kubelet API

kubectl create clusterrolebinding kube-apiserver:kubelet-apis --clusterrole=system:kubelet-api-admin --user kubernetes

3、部署高可用 kube-controller-manager 集群

①创建 kube-controller-manager 证书和私钥

创建证书签名请求

cd /opt/k8s/work
cat > kube-controller-manager-csr.json <<EOF
{
    "CN": "system:kube-controller-manager",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "hosts": [
      "127.0.0.1",
      "10.0.0.206",
      "10.0.0.207",
      "10.0.0.208"
    ],
    "names": [
      {
        "C": "CN",
        "ST": "BeiJing",
        "L": "BeiJing",
        "O": "system:kube-controller-manager",
        "OU": "4Paradigm"
      }
    ]
}
EOF

生成证书和私钥

cd /opt/k8s/work
cfssl gencert -ca=/opt/k8s/work/ca.pem \
  -ca-key=/opt/k8s/work/ca-key.pem \
  -config=/opt/k8s/work/ca-config.json \
  -profile=kubernetes kube-controller-manager-csr.json | cfssljson -bare kube-controller-manager
ls kube-controller-manager*pem

分发证书和私钥到集群节点：

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp kube-controller-manager*.pem root@${node_ip}:/etc/kubernetes/cert/
  done

②创建和分发 kubeconfig 文件

kubeconfig 文件包含访问 apiserver 的所有信息，如 apiserver 地址、CA 证书和自身使用的证书

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
kubectl config set-cluster kubernetes \
  --certificate-authority=/opt/k8s/work/ca.pem \
  --embed-certs=true \
  --server=${KUBE_APISERVER} \
  --kubeconfig=kube-controller-manager.kubeconfig

kubectl config set-credentials system:kube-controller-manager \
  --client-certificate=kube-controller-manager.pem \
  --client-key=kube-controller-manager-key.pem \
  --embed-certs=true \
  --kubeconfig=kube-controller-manager.kubeconfig

kubectl config set-context system:kube-controller-manager \
  --cluster=kubernetes \
  --user=system:kube-controller-manager \
  --kubeconfig=kube-controller-manager.kubeconfig

kubectl config use-context system:kube-controller-manager --kubeconfig=kube-controller-manager.kubeconfig

分发 kubeconfig 到集群节点

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp kube-controller-manager.kubeconfig root@${node_ip}:/etc/kubernetes/
  done

③创建和分发 kube-controller-manager systemd unit 文件

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
cat > kube-controller-manager.service <<EOF
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/GoogleCloudPlatform/kubernetes

[Service]
WorkingDirectory=${K8S_DIR}/kube-controller-manager
ExecStart=/opt/k8s/bin/kube-controller-manager \\
  --port=0 \\
  --secure-port=10252 \\
  --bind-address=127.0.0.1 \\
  --kubeconfig=/etc/kubernetes/kube-controller-manager.kubeconfig \\
  --authentication-kubeconfig=/etc/kubernetes/kube-controller-manager.kubeconfig \\
  --authorization-kubeconfig=/etc/kubernetes/kube-controller-manager.kubeconfig \\
  --service-cluster-ip-range=${SERVICE_CIDR} \\
  --cluster-name=kubernetes \\
  --cluster-signing-cert-file=/etc/kubernetes/cert/ca.pem \\
  --cluster-signing-key-file=/etc/kubernetes/cert/ca-key.pem \\
  --experimental-cluster-signing-duration=8760h \\
  --root-ca-file=/etc/kubernetes/cert/ca.pem \\
  --service-account-private-key-file=/etc/kubernetes/cert/ca-key.pem \\
  --leader-elect=true \\
  --controllers=*,bootstrapsigner,tokencleaner \\
  --horizontal-pod-autoscaler-use-rest-clients=true \\
  --horizontal-pod-autoscaler-sync-period=10s \\
  --tls-cert-file=/etc/kubernetes/cert/kube-controller-manager.pem \\
  --tls-private-key-file=/etc/kubernetes/cert/kube-controller-manager-key.pem \\
  --use-service-account-credentials=true \\
  --kube-api-qps=1000 \\
  --kube-api-burst=2000 \\
  --logtostderr=true \\
  --v=2
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
EOF

分发 systemd unit 文件到所有集群节点

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp kube-controller-manager.service root@${node_ip}:/etc/systemd/system/
  done

④kube-controller-manager 的权限

kubectl create clusterrolebinding controller-manager:system:auth-delegator --user system:kube-controller-manager --clusterrole system:auth-delegator

⑤启动 kube-controller-manager 服务

启动服务

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "mkdir -p ${K8S_DIR}/kube-controller-manager"
    ssh root@${node_ip} "systemctl daemon-reload && systemctl enable kube-controller-manager && systemctl restart kube-controller-manager"
  done

检查集群服务运行状态

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "systemctl status kube-controller-manager|grep Active"
  done

确保状态为active(running)，否则查看日志，确认原因：

journalctl -u kube-controller-manager

⑥测试 kube-controller-manager 集群的高可用

停掉一个或两个节点的kube-controller-manager服务，观察其它节点的日志，看是否获取了 leader 权限

systemctl stop kube-controller-manager.service

查看当前的 leader

[root@k8s-node-1 work]# kubectl get endpoints kube-controller-manager --namespace=kube-system  -o yaml
apiVersion: v1
kind: Endpoints
metadata:
  annotations:
    control-plane.alpha.kubernetes.io/leader: '{"holderIdentity":"k8s-node-1_e1878012-7c9f-11e9-904c-000c290e828c","leaseDurationSeconds":15,"acquireTime":"2019-05-22T14:43:10Z","renewTime":"2019-05-22T14:44:39Z","leaderTransitions":3}'
  creationTimestamp: 2019-05-22T14:23:04Z
  name: kube-controller-manager
  namespace: kube-system
  resourceVersion: "1706"
  selfLink: /api/v1/namespaces/kube-system/endpoints/kube-controller-manager
  uid: 1ce1e9ba-7c9d-11e9-b7a4-000c290e828c

4、部署高可用 kube-scheduler 集群

①创建 kube-scheduler 证书和私钥

创建证书签名请求

cd /opt/k8s/work
cat > kube-scheduler-csr.json <<EOF
{
    "CN": "system:kube-scheduler",
    "hosts": [
      "127.0.0.1",
      "10.0.0.206"，
      "10.0.0.207",
      "10.0.0.208"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
      {
        "C": "CN",
        "ST": "BeiJing",
        "L": "BeiJing",
        "O": "system:kube-scheduler",
        "OU": "4Paradigm"
      }
    ]
}
EOF

生成证书和私钥：

cd /opt/k8s/work
cfssl gencert -ca=/opt/k8s/work/ca.pem \
  -ca-key=/opt/k8s/work/ca-key.pem \
  -config=/opt/k8s/work/ca-config.json \
  -profile=kubernetes kube-scheduler-csr.json | cfssljson -bare kube-scheduler
ls kube-scheduler*pem

②创建和分发 kubeconfig 文件

创建kubeconfig

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
kubectl config set-cluster kubernetes \
  --certificate-authority=/opt/k8s/work/ca.pem \
  --embed-certs=true \
  --server=${KUBE_APISERVER} \
  --kubeconfig=kube-scheduler.kubeconfig

kubectl config set-credentials system:kube-scheduler \
  --client-certificate=kube-scheduler.pem \
  --client-key=kube-scheduler-key.pem \
  --embed-certs=true \
  --kubeconfig=kube-scheduler.kubeconfig

kubectl config set-context system:kube-scheduler \
  --cluster=kubernetes \
  --user=system:kube-scheduler \
  --kubeconfig=kube-scheduler.kubeconfig

kubectl config use-context system:kube-scheduler --kubeconfig=kube-scheduler.kubeconfig

分发kubeconfig 到所节点：

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp kube-scheduler.kubeconfig root@${node_ip}:/etc/kubernetes/
  done

③创建 kube-scheduler 配置文件

cat <<EOF | sudo tee kube-scheduler.yaml
apiVersion: componentconfig/v1alpha1
kind: KubeSchedulerConfiguration
clientConnection:
  kubeconfig: "/etc/kubernetes/kube-scheduler.kubeconfig"
leaderElection:
  leaderElect: true
EOF

分发 kube-scheduler 配置文件到所有节点

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp kube-scheduler.yaml root@${node_ip}:/etc/kubernetes/
  done

④创建和分发 kube-scheduler systemd unit 文件

cd /opt/k8s/work
cat > kube-scheduler.service <<EOF
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/GoogleCloudPlatform/kubernetes

[Service]
WorkingDirectory=${K8S_DIR}/kube-scheduler
ExecStart=/opt/k8s/bin/kube-scheduler \\
  --config=/etc/kubernetes/kube-scheduler.yaml \\
  --address=127.0.0.1 \\
  --kube-api-qps=100 \\
  --logtostderr=true \\
  --v=2
Restart=always
RestartSec=5
StartLimitInterval=0

[Install]
WantedBy=multi-user.target
EOF

分发 systemd unit 文件到所有节点

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp kube-scheduler.service root@${node_ip}:/etc/systemd/system/
  done

⑤启动 kube-scheduler 服务

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "mkdir -p ${K8S_DIR}/kube-scheduler"
    ssh root@${node_ip} "systemctl daemon-reload && systemctl enable kube-scheduler && systemctl restart kube-scheduler"
  done

⑥检查服务运行状态

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "systemctl status kube-scheduler|grep Active"
  done

确保状态为 active (running)，否则查看日志

journalctl -u kube-scheduler

⑦测试 kube-scheduler 集群的高可用

随便停掉一个节点kube-scheduler 服务，看其它节点是否获取了 leader 权限（systemd 日志）

systemctl stop kube-scheduler.service

查看当前的 leader

kubectl get endpoints kube-scheduler --namespace=kube-system  -o yaml

八、部署Node节点组件

kubernetes node 节点运行如下组件：

docker
kubelet ---上面已部署
kube-proxy
flanneld ---上文已部署
kube-nginx

1、部署 docker 组件

https://download.docker.com/linux/static/stable/x86_64/ 页面下载最新发布包

①下载和分发 docker 二进制文件

下载解压

cd /opt/k8s/work
wget https://download.docker.com/linux/static/stable/x86_64/docker-18.09.0.tgz
tar -xvf docker-18.09.0.tgz

分发二进制文件到所有node节点：

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    scp docker/*  root@${node_ip}:/opt/k8s/bin/
    ssh root@${node_ip} "chmod +x /opt/k8s/bin/*"
  done

②创建和分发systemd unit 文件

cd /opt/k8s/work
cat > docker.service <<"EOF"
[Unit]
Description=Docker Application Container Engine
Documentation=http://docs.docker.io

[Service]
WorkingDirectory=##DOCKER_DIR##
Environment="PATH=/opt/k8s/bin:/bin:/sbin:/usr/bin:/usr/sbin"
EnvironmentFile=-/run/flannel/docker
ExecStart=/opt/k8s/bin/dockerd $DOCKER_NETWORK_OPTIONS
ExecReload=/bin/kill -s HUP $MAINPID
Restart=on-failure
RestartSec=5
LimitNOFILE=infinity
LimitNPROC=infinity
LimitCORE=infinity
Delegate=yes
KillMode=process

[Install]
WantedBy=multi-user.target
EOF

EOF 前后有双引号，这样 bash 不会替换文档中的变量，如 $DOCKER_NETWORK_OPTIONS；
dockerd 运行时会调用其它 docker 命令，如 docker-proxy，所以需要将 docker 命令所在的目录加到 PATH 环境变量中；
flanneld 启动时将网络配置写入 /run/flannel/docker 文件中，dockerd 启动前读取该文件中的环境变量 DOCKER_NETWORK_OPTIONS ，然后设置 docker0 网桥网段；
如果指定了多个 EnvironmentFile 选项，则必须将 /run/flannel/docker 放在最后(确保 docker0 使用 flanneld 生成的 bip 参数)；
docker 需要以 root 用于运行；
docker 从 1.13 版本开始，可能将 iptables FORWARD chain的默认策略设置为DROP，从而导致 ping 其它 Node 上的 Pod IP 失败，遇到这种情况时，需要手动设置策略为 ACCEPT

iptables -P FORWARD ACCEPT

分发 systemd unit 文件到所有node节点

③配置和分发 docker 配置文件

使用国内的仓库镜像服务器以加快 pull image 的速度，同时增加下载的并发数 (需要重启 dockerd 生效)

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
cat > docker-daemon.json <<EOF
{
    "registry-mirrors": ["https://hub-mirror.c.163.com", "https://docker.mirrors.ustc.edu.cn"],
    "insecure-registries": ["docker02:35000"],
    "max-concurrent-downloads": 20,
    "live-restore": true,
    "max-concurrent-uploads": 10,
    "debug": true,
    "data-root": "${DOCKER_DIR}/data",
    "exec-root": "${DOCKER_DIR}/exec",
    "log-opts": {
      "max-size": "100m",
      "max-file": "5"
    }
}
EOF

分发 docker 配置文件到所有node

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "mkdir -p  /etc/docker/ ${DOCKER_DIR}/{data,exec}"
    scp docker-daemon.json root@${node_ip}:/etc/docker/daemon.json
  done

④启动 docker 服务

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "systemctl stop firewalld && systemctl disable firewalld"
    ssh root@${node_ip} "/usr/sbin/iptables -F && /usr/sbin/iptables -X && /usr/sbin/iptables -F -t nat && /usr/sbin/iptables -X -t nat"
    ssh root@${node_ip} "/usr/sbin/iptables -P FORWARD ACCEPT"
    ssh root@${node_ip} "systemctl daemon-reload && systemctl enable docker && systemctl restart docker"
    ssh root@${node_ip} "sysctl -p /etc/sysctl.d/kubernetes.conf"
  done

⑤检查服务运行状态

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "systemctl status docker|grep Active"
  done

确保状态为 active (running)，否则查看日志

journalctl -u docker

⑥检查 docker0 网桥

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "/usr/sbin/ip addr show flannel.1 && /usr/sbin/ip addr show docker0"
  done

确认各 work 节点的 docker0 网桥和 flannel.1 接口的 IP 处于同一个网段中(如下 172.30.168.0/32 位于 172.30.168.1/21 中)

4: flannel.1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UNKNOWN 
    link/ether 96:f0:62:fb:38:4b brd ff:ff:ff:ff:ff:ff
    inet 172.30.168.0/32 scope global flannel.1
       valid_lft forever preferred_lft forever
5: docker0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN 
    link/ether 02:42:df:b8:e8:8d brd ff:ff:ff:ff:ff:ff
    inet 172.30.168.1/21 brd 172.30.175.255 scope global docker0
       valid_lft forever preferred_lft forever

2、部署 kubelet 组件

kublet 运行在每个Node节点上，接收 kube-apiserver 发送的请求，管理 Pod 容器，执行交互式命令，如 exec、run、logs 等

①创建 kubelet bootstrap kubeconfig 文件

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_name in ${NODE_NAMES[@]}
  do
    echo ">>> ${node_name}"

    # 创建 token
    export BOOTSTRAP_TOKEN=$(kubeadm token create \
      --description kubelet-bootstrap-token \
      --groups system:bootstrappers:${node_name} \
      --kubeconfig ~/.kube/config)

    # 设置集群参数
    kubectl config set-cluster kubernetes \
      --certificate-authority=/etc/kubernetes/cert/ca.pem \
      --embed-certs=true \
      --server=${KUBE_APISERVER} \
      --kubeconfig=kubelet-bootstrap-${node_name}.kubeconfig

    # 设置客户端认证参数
    kubectl config set-credentials kubelet-bootstrap \
      --token=${BOOTSTRAP_TOKEN} \
      --kubeconfig=kubelet-bootstrap-${node_name}.kubeconfig

    # 设置上下文参数
    kubectl config set-context default \
      --cluster=kubernetes \
      --user=kubelet-bootstrap \
      --kubeconfig=kubelet-bootstrap-${node_name}.kubeconfig

    # 设置默认上下文
    kubectl config use-context default --kubeconfig=kubelet-bootstrap-${node_name}.kubeconfig
  done

分发 bootstrap kubeconfig 文件到所有Node节点

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_name in ${NODE_NAMES[@]}
  do
    echo ">>> ${node_name}"
    scp kubelet-bootstrap-${node_name}.kubeconfig root@${node_name}:/etc/kubernetes/kubelet-bootstrap.kubeconfig
  done

②创建和分发 kubelet 参数配置文件

创建 kubelet 参数配置模板文件

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
cat <<EOF | tee kubelet-config.yaml.template
kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
authentication:
  anonymous:
    enabled: false
  webhook:
    enabled: true
  x509:
    clientCAFile: "/etc/kubernetes/cert/ca.pem"
authorization:
  mode: Webhook
clusterDomain: "${CLUSTER_DNS_DOMAIN}"
clusterDNS:
  - "${CLUSTER_DNS_SVC_IP}"
podCIDR: "${POD_CIDR}"
maxPods: 220
serializeImagePulls: false
hairpinMode: promiscuous-bridge
cgroupDriver: cgroupfs
runtimeRequestTimeout: "15m"
rotateCertificates: true
serverTLSBootstrap: true
readOnlyPort: 0
port: 10250
address: "##NODE_IP##"
EOF

为各节点创建和分发 kubelet 配置文件

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do 
    echo ">>> ${node_ip}"
    sed -e "s/##NODE_IP##/${node_ip}/" kubelet-config.yaml.template > kubelet-config-${node_ip}.yaml.template
    scp kubelet-config-${node_ip}.yaml.template root@${node_ip}:/etc/kubernetes/kubelet-config.yaml
  done

③创建和分发 kubelet systemd unit 文件

cd /opt/k8s/work
cat > kubelet.service.template <<EOF
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/GoogleCloudPlatform/kubernetes
After=docker.service
Requires=docker.service

[Service]
WorkingDirectory=${K8S_DIR}/kubelet
ExecStart=/opt/k8s/bin/kubelet \\
  --root-dir=${K8S_DIR}/kubelet \\
  --bootstrap-kubeconfig=/etc/kubernetes/kubelet-bootstrap.kubeconfig \\
  --cert-dir=/etc/kubernetes/cert \\
  --kubeconfig=/etc/kubernetes/kubelet.kubeconfig \\
  --config=/etc/kubernetes/kubelet-config.yaml \\
  --hostname-override=##NODE_NAME## \\
  --pod-infra-container-image=registry.cn-beijing.aliyuncs.com/k8s_images/pause-amd64:3.1
  --allow-privileged=true \\
  --event-qps=0 \\
  --kube-api-qps=1000 \\
  --kube-api-burst=2000 \\
  --registry-qps=0 \\
  --image-pull-progress-deadline=30m \\
  --logtostderr=true \\
  --v=2
Restart=always
RestartSec=5
StartLimitInterval=0

[Install]
WantedBy=multi-user.target
EOF

为各节点创建和分发 kubelet systemd unit 文件

cd /opt/k8s/work
source /opt/k8s/bin/environment.sh
for node_name in ${NODE_NAMES[@]}
  do 
    echo ">>> ${node_name}"
    sed -e "s/##NODE_NAME##/${node_name}/" kubelet.service.template > kubelet-${node_name}.service
    scp kubelet-${node_name}.service root@${node_name}:/etc/systemd/system/kubelet.service
  done

④启动 kubelet 服务

source /opt/k8s/bin/environment.sh
for node_ip in ${NODE_IPS[@]}
  do
    echo ">>> ${node_ip}"
    ssh root@${node_ip} "mkdir -p ${K8S_DIR}/kubelet"
    ssh root@${node_ip} "/usr/sbin/swapoff -a"
    ssh root@${node_ip} "systemctl daemon-reload && systemctl enable kubelet && systemctl restart kubelet"
  done

必须创建工作目录；
关闭 swap 分区，否则 kubelet 会启动失败

⑤自动approve CSR 请求

创建三个 ClusterRoleBinding，分别用于自动 approve client、renew client、renew server 证书：

cd /opt/k8s/work
cat > csr-crb.yaml <<EOF
 # Approve all CSRs for the group "system:bootstrappers"
 kind: ClusterRoleBinding
 apiVersion: rbac.authorization.k8s.io/v1
 metadata:
   name: auto-approve-csrs-for-group
 subjects:
 - kind: Group
   name: system:bootstrappers
   apiGroup: rbac.authorization.k8s.io
 roleRef:
   kind: ClusterRole
   name: system:certificates.k8s.io:certificatesigningrequests:nodeclient
   apiGroup: rbac.authorization.k8s.io
---
 # To let a node of the group "system:nodes" renew its own credentials
 kind: ClusterRoleBinding
 apiVersion: rbac.authorization.k8s.io/v1
 metadata:
   name: node-client-cert-renewal
 subjects:
 - kind: Group
   name: system:nodes
   apiGroup: rbac.authorization.k8s.io
 roleRef:
   kind: ClusterRole
   name: system:certificates.k8s.io:certificatesigningrequests:selfnodeclient
   apiGroup: rbac.authorization.k8s.io
---
# A ClusterRole which instructs the CSR approver to approve a node requesting a
# serving cert matching its client cert.
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  name: approve-node-server-renewal-csr
rules:
- apiGroups: ["certificates.k8s.io"]
  resources: ["certificatesigningrequests/selfnodeserver"]
  verbs: ["create"]
---
 # To let a node of the group "system:nodes" renew its own server credentials
 kind: ClusterRoleBinding
 apiVersion: rbac.authorization.k8s.io/v1
 metadata:
   name: node-server-cert-renewal
 subjects:
 - kind: Group
   name: system:nodes
   apiGroup: rbac.authorization.k8s.io
 roleRef:
   kind: ClusterRole
   name: approve-node-server-renewal-csr
   apiGroup: rbac.authorization.k8s.io
EOF

auto-approve-csrs-for-group：自动 approve node 的第一次 CSR；注意第一次 CSR 时，请求的 Group 为 system:bootstrappers；
node-client-cert-renewal：自动 approve node 后续过期的 client 证书，自动生成的证书 Group 为 system:nodes;
node-server-cert-renewal：自动 approve node 后续过期的 server 证书，自动生成的证书 Group 为 system:nodes

生效配置：

kubectl apply -f csr-crb.yaml

查看 kublet 的情况

kubectl get csr

转载于:https://www.cnblogs.com/yanxinjiang/p/9647545.html

weixin_30783913

关注

0
点赞
踩
0

收藏

觉得还不错? 一键收藏
0
评论
linux运维、架构之路-Kubernetes集群部署TLS双向认证

一、kubernetes的认证授权 Kubernetes集群的所有操作基本上都是通过kube-apiserver这个组件进行的，它提供HTTP RESTful形式的API供集群内外客户端调用。需要注意的是：认证授权过程只存在HTTPS形式的API中。也就是说，如果客户端使用HTTP连接到kube-apiserver，那么是不会进行认证授权的。所以说，可以这么设置，在集群内部组件间通信...
复制链接

扫一扫