CenOS6 nginx+pxe+tftpd+samba/nfs+dhcpd 无盘安装windows & linux

CenOS6
nginx+pxe+tftpd+samba/nfs+dhcpd
无盘安装windows & linux

参考文档：
http://www.debian-administration.org/article/478/Setting_up_a_server_for_PXE_network_booting

https://wiki.ubuntu.com/UEFI/PXE-netboot-install
http://drbl.sourceforge.net/about/




1.安装软件
yum -y install nfs-utils samba syslinux tftp tftp-server dhcp

2.配置网卡（bridge）---kvm等虚拟机需要桥接,这样才能支持pxe
vim /etc/sysconfig/network-scripts/ifcfg-br0
DEVICE="br0"
BOOTPROTO="static"
NM_CONTROLLED="no"
ONBOOT="yes"

IPADDR=192.168.0.1
NETMASK=255.255.255.0
GATEWAY=192.168.0.1
DNS1=192.168.0.1

TYPE=Bridge
DELAY=0


vim /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
BOOTPROTO="none"
NM_CONTROLLED="no"
ONBOOT="yes"

BRIDGE=br0

3.配置samba (共享windows安装源)
mkdir /smb/{win2008,win2012,win7_x64,win7_x86,win8e_x64,win8e_x86,winxp}
vim /etc/samba/smb.conf

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
#
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
#  http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#---------------
# SELINUX NOTES:
#
# If you want to use the useradd/groupadd family of binaries please run:
# setsebool -P samba_domain_controller on
#
# If you want to share home directories via samba please run:
# setsebool -P samba_enable_home_dirs on
#
# If you create a new directory you want to share you should mark it as
# "samba_share_t" so that selinux will let you write into it.
# Make sure not to do that on system directories as they may already have
# been marked with othe SELinux labels.
#
# Use ls -ldZ /path to see which context a directory has
#
# Set labels only on directories you created!
# To set a label use the following: chcon -t samba_share_t /path
#
# If you need to share a system created directory you can use one of the
# following (read-only/read-write):
# setsebool -P samba_export_all_ro on
# or
# setsebool -P samba_export_all_rw on
#
# If you want to run scripts (preexec/root prexec/print command/...) please
# put them into the /var/lib/samba/scripts directory so that smbd will be
# allowed to run them.
# Make sure you COPY them and not MOVE them so that the right SELinux context
# is applied, to check all is ok use restorecon -R -v /var/lib/samba/scripts
#
#--------------
#
#======================= Global Settings =====================================
    
[global]
    
# ----------------------- Network Related Options -------------------------
#
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
#
# server string is the equivalent of the NT Description field
#
# netbios name can be used to specify a server name not tied to the hostname
#
# Interfaces lets you configure Samba to use multiple interfaces
# If you have multiple network interfaces then you can list the ones
# you want to listen on (never omit localhost)
#
# Hosts Allow/Hosts Deny lets you restrict who can connect, and you can
# specifiy it as a per share option as well
#
    workgroup = WORKGROUP
    server string = Samba Server Version %v
    
;    netbios name = Jlive
    
;    interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24
;    hosts allow = 127. 192.168.12. 192.168.13.
    
# --------------------------- Logging Options -----------------------------
#
# Log File let you specify where to put logs and how to split them up.
#
# Max Log Size let you specify the max size log files should reach
    
    # logs split per machine
    log file = /var/log/samba/log.%m
    # max 50KB per log file, then rotate
    max log size = 50
    
# ----------------------- Standalone Server Options ------------------------
#
# Scurity can be set to user, share(deprecated) or server(deprecated)
#
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.

    security = user
    passdb backend = tdbsam

#**********************************************************************#
    username map = /etc/samba/smbusers


# ----------------------- Domain Members Options ------------------------
#
# Security must be set to domain or ads
#
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
#
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
#
# Use password server option only with security = server or if you can't
# use the DNS to locate Domain Controllers
# The argument list may include:
#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
#   password server = *
    
    
;    security = domain
;    passdb backend = tdbsam
;    realm = MY_REALM

;    password server =

# ----------------------- Domain Controller Options ------------------------
#
# Security must be set to user for domain controllers
#
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
#
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
#
# Domain Logons let Samba be a domain logon server for Windows workstations.
#
# Logon Scrpit let yuou specify a script to be run at login time on the client
# You need to provide it in a share called NETLOGON
#
# Logon Path let you specify where user profiles are stored (UNC path)
#
# Various scripts can be used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
#
;    security = user
;    passdb backend = tdbsam
    
;    domain master = yes
;    domain logons = yes
    
    # the login script name depends on the machine name
;    logon script = %m.bat
    # the login script name depends on the unix user used
;    logon script = %u.bat
;    logon path = \\%L\Profiles\%u
    # disables profiles support by specifing an empty path
;    logon path =   

转载于:https://www.cnblogs.com/lixuebin/archive/2013/05/26/10814657.html