socket 套接字总结

于 2018-04-14 18:31:00 发布
阅读量79 收藏
点赞数
文章标签： json 网络 python
原文链接：http://www.cnblogs.com/Mryang123/p/8833861.html
版权

简单版

服务端

import socket
import struct
import json
import os

server_dir = r'E:\Moudule_1\socket练习\server\server_file'
server = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
server.bind(('127.1.1.1',8808))
server.listen(5)

print('setting...')
while True:
    conn, client_addr = server.accept()
    print(client_addr)
    while True:
        try:
            #1.接收命令
            data = conn.recv(1024)
            print('客户端命令:',data)

            #2.接收报头长度
            file_struct = conn.recv(4)
            file_len = struct.unpack('i',file_struct )[0]
            file_bytes = conn.recv(file_len)
            file_json = json.loads(file_bytes)

            file_name = file_json['filename']
            total_size = file_json['filesize']

            #将从客户端接收的文件数据写入
            with open('%s/%s' %(server_dir,file_name), 'wb') as f:
                recv_size = 0
                while recv_size < total_size:
                    line = conn.recv(1024)
                    f.write(line)
                    recv_size += len(line)
                    print('总大小:%s 已下载大小:%s' % (total_size, recv_size))
        except:
            exit()
conn.close()
server.close()
View Code

客户端

import socket
import struct
import json
import os

client_dir = r'E:\Moudule_1\socket练习\client\download'
client = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
client.connect(('127.1.1.1',8808))

while True:
    #1.发送命令
    inp = input('>>:')
    if not inp:continue
    client.send(inp.encode('utf-8'))

    #将文件的以读的方式打开，将数据发送给server
    #1.固定报头长度
    filename = inp.split()[1]
    filesize = os.path.getsize(os.path.join(client_dir, filename))
    file_data = {
        'filename' : filename,
        'filesize' : filesize
    }

    file_json = json.dumps(file_data)
    file_bytes = file_json.encode('utf-8')

    file_struct = struct.pack('i', len(file_bytes))
    #2.发送报头长度
    client.send(file_struct)
    #3.发送报头
    client.send(file_bytes)

    #4.向server发送真实的数据
    with open('%s/%s' %(client_dir, filename), 'rb') as f:
        for line in f:
            client.send(line)

client.close()
View Code

优化版

服务端

#!/usr/bin/env python
# _*_ coding:utf-8 _*_
# Author:Mr.yang
import socket
import struct
import json
import os

server_dir = r'E:\Moudule_1\socket练习\优化版\server\server_file'
server = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
server.bind(('127.1.1.1', 8808))
server.listen(5)

def put(conn):
    # 2.接收报头长度
    file_struct = conn.recv(4)
    file_len = struct.unpack('i', file_struct)[0]
    file_bytes = conn.recv(file_len)
    file_json = json.loads(file_bytes)

    file_name = file_json['filename']
    total_size = file_json['filesize']

    # 将从客户端接收的文件数据写入
    with open('%s/%s' % (server_dir, file_name), 'wb') as f:
        recv_size = 0
        while recv_size < total_size:
            line = conn.recv(1024)
            f.write(line)
            recv_size += len(line)
            result = '总大小:%s 已上传大小:%s' % (total_size, recv_size)
            conn.send(result.encode('utf-8'))

def get(conn,data):
    # 将文件的以读的方式打开，将数据发送给client
    # 1.固定报头长度
    filename = data.split()[1]
    filesize = os.path.getsize(os.path.join(server_dir, filename))
    file_data = {
        'filename': filename,
        'filesize': filesize
    }

    file_json = json.dumps(file_data)
    file_bytes = file_json.encode('utf-8')
    file_struct = struct.pack('i', len(file_bytes))
    # 2.发送报头长度
    conn.send(file_struct)
    # 3.发送报头
    conn.send(file_bytes)

    # 4.向client发送真实的数据
    with open('%s/%s' % (server_dir, filename), 'rb') as f:
        for line in f:
            conn.send(line)


def run():
    print('setting...')
    while True:
        conn, client_addr = server.accept()
        print(client_addr)
        while True:
            try:
                #1.接收命令
                data = conn.recv(1024).decode('utf-8')
                print('客户端命令:',data)
                cmd =data.split()[0]
                if cmd == 'put':
                    put(conn)
                elif cmd == 'get':
                    get(conn,data)
            except:
                exit()
    conn.close()
    server.close()

if __name__ == '__main__':
    run()
View Code

客户端

#!/usr/bin/env python
# _*_ coding:utf-8 _*_
# Author:Mr.yang
import socket
import struct
import json
import os

upload_dir = r'E:\Moudule_1\socket练习\优化版\client\upload'
download_dir = r'E:\Moudule_1\socket练习\优化版\client\download'
client = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
client.connect(('127.1.1.1', 8808))

def put(inp):
    # 将文件的以读的方式打开，将数据发送给server
    # 1.固定报头长度
    filename = inp.split()[1]
    filesize = os.path.getsize(os.path.join(upload_dir, filename))
    file_data = {
        'filename': filename,
        'filesize': filesize
    }

    file_json = json.dumps(file_data)
    file_bytes = file_json.encode('utf-8')

    file_struct = struct.pack('i', len(file_bytes))
    # 2.发送报头长度
    client.send(file_struct)
    # 3.发送报头
    client.send(file_bytes)

    # 4.向server发送真实的数据
    with open('%s/%s' % (upload_dir, filename), 'rb') as f:
        for line in f:
            client.send(line)
            result = client.recv(1024)
            print(result.decode('utf-8'))

def get():
    file_struct = client.recv(4)
    file_len = struct.unpack('i', file_struct)[0]
    file_bytes = client.recv(file_len)
    file_json = json.loads(file_bytes)
    file_name = file_json['filename']
    total_size = file_json['filesize']

    # 将从server接收的文件数据写入
    with open('%s/%s' % (download_dir, file_name), 'wb') as f:
        recv_size = 0
        while recv_size < total_size:
            line = client.recv(1024)
            f.write(line)
            recv_size += len(line)
            print('总大小:%s 已上传大小:%s' % (total_size, recv_size))

def run():
    while True:
        #1.发送命令
        inp = input('>>:')
        if not inp:continue
        cmd = inp.split()[0]
        client.send(inp.encode('utf-8'))

        if cmd == 'put':
            put(inp)
        if cmd == 'get':
            get()
    client.close()

if __name__ == '__main__':
    run()
View Code

面向对象版

服务端

#!/usr/bin/env python
# _*_ coding:utf-8 _*_
# Author:Mr.yang
import socket
import struct
import json
import os

class MYTCPServer:
    address_family = socket.AF_INET  # 地址家族

    socket_type = socket.SOCK_STREAM  # 基于TCP协议的流水型

    server_dir = r'E:\Moudule_1\socket练习\优化版\server\server_file'

    allow_reuse_address = False  # 是否重复使用IP地址

    max_packet_size = 8192  # 最大的数据包大小

    request_queue_size = 5  # 允许链接的大小

    def __init__(self,server_address, bind_and_activate=True):
        self.server_address = server_address # 服务端地址
        self.socket = socket.socket(self.address_family,self.socket_type)

        if bind_and_activate:
            try:
                self.server_bind()
                self.server_activate()
            except:
                self.server_close()
                raise

    def server_bind(self):
        if self.allow_reuse_address: # 判断是否允许重用端口
            self.socket.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1)
        self.socket.bind(self.server_address) # 绑定地址
        self.server_address = self.socket.getsockname()


    def server_activate(self):
        self.socket.listen(self.request_queue_size) # 设置最大接听数

    def server_close(self):
        self.socket.close() #关闭

    def get_request(self):
        return self.socket.accept() # 建立链接

    def run(self,):
        print('setting...')
        while True:
            self.conn, client_addr = self.get_request()
            print(client_addr)
            while True:
                try:
                    #1.接收命令
                    data = self.conn.recv(1024).decode('utf-8')
                    print('客户端命令:',data)
                    cmd =data.split()[0]
                    if hasattr(self,cmd):
                        func = getattr(self,cmd)
                        func(data)
                except:
                    exit()

    def put(self,data):
        # 2.接收报头长度
        file_result =  self.conn.recv(self.max_packet_size).decode('utf-8')
        if file_result == '0':
            file_struct = self.conn.recv(4)
            file_len = struct.unpack('i', file_struct)[0]
            file_bytes = self.conn.recv(file_len)
            file_json = json.loads(file_bytes)

            file_name = file_json['filename']
            total_size = file_json['filesize']

            # 将从客户端接收的文件数据写入
            with open('%s/%s' % (self.server_dir, file_name), 'wb') as f:
                recv_size = 0
                while recv_size < total_size:
                    line = self.conn.recv(1024)
                    f.write(line)
                    recv_size += len(line)
                    result = '总大小:%s 已上传大小:%s' % (total_size, recv_size)
                    self.conn.send(result.encode('utf-8'))
        else:
            print('文件不存在')

    def get(self,data):
        # 将文件的以读的方式打开，将数据发送给client
        # 1.固定报头长度
        filename = data.split()[1]
        filepath = os.path.join(self.server_dir, filename)
        if os.path.exists(filepath):
            self.conn.send('0'.encode('utf-8'))
            filesize = os.path.getsize(filepath)
            file_data = {
                'filename': filename,
                'filesize': filesize
            }

            file_json = json.dumps(file_data)
            file_bytes = file_json.encode('utf-8')
            file_struct = struct.pack('i', len(file_bytes))
            # 2.发送报头长度
            self.conn.send(file_struct)
            # 3.发送报头
            self.conn.send(file_bytes)

            # 4.向client发送真实的数据
            with open('%s/%s' % (self.server_dir, filename), 'rb') as f:
                for line in f:
                    self.conn.send(line)
        else:
            self.conn.send('1'.encode('utf-8'))
            print('文件不存在')
obj = MYTCPServer(('127.1.1.1', 8808))
obj.run()
View Code

客户端

#!/usr/bin/env python
# _*_ coding:utf-8 _*_
# Author:Mr.yang
import socket
import struct
import json
import os
class MYTCPClient:
    address_family = socket.AF_INET  # 地址家族

    socket_type = socket.SOCK_STREAM  # 基于TCP协议的流水型

    allow_reuse_address = False  # 是否重复使用IP地址

    max_packet_size = 8192  # 最大的数据包大小

    request_queue_size = 5  # 允许链接的大小

    upload_dir = r'E:\Moudule_1\socket练习\优化版\client\upload'

    download_dir = r'E:\Moudule_1\socket练习\优化版\client\download'

    def __init__(self,sever_address, connect=True):
        self.server_address = sever_address
        self.socket = socket.socket(self.address_family, self.socket_type)
        if connect:
            try:
                self.client_connect()
            except:
                self.client_close
                raise

    def client_connect(self):
        self.socket.connect(self.server_address) # 创建双线管道链接

    def client_close(self):
        self.socket.close()

    def put(self,inp):
        # 将文件的以读的方式打开，将数据发送给server
        # 1.固定报头长度
        filename = inp.split()[1]
        filepath = os.path.join(self.upload_dir, filename)
        if os.path.exists(filepath): # 判断文件是否存在
            self.socket.send('0'.encode('utf-8'))
            filesize = os.path.getsize(filepath)
            file_data = {
                'filename': filename,
                'filesize': filesize
            }

            file_json = json.dumps(file_data)
            file_bytes = file_json.encode('utf-8')

            file_struct = struct.pack('i', len(file_bytes))
            # 2.发送报头长度
            self.socket.send(file_struct)
            # 3.发送报头
            self.socket.send(file_bytes)

            # 4.向server发送真实的数据
            with open('%s/%s' % (self.upload_dir, filename), 'rb') as f:
                for line in f:
                    self.socket.send(line)
                    result = self.socket.recv(1024)
                    print(result.decode('utf-8'))
        else:
            self.socket.send('1'.encode('utf-8'))
            print('文件不存在')

    def get(self,inp):

        file_result = self.socket.recv(self.max_packet_size).decode('utf-8')
        if file_result == '0':
            file_struct = self.socket.recv(4)
            file_len = struct.unpack('i', file_struct)[0]
            file_bytes = self.socket.recv(file_len)
            file_json = json.loads(file_bytes)
            file_name = file_json['filename']
            total_size = file_json['filesize']

            # 将从server接收的文件数据写入
            with open('%s/%s' % (self.download_dir, file_name), 'wb') as f:
                recv_size = 0
                while recv_size < total_size:
                    line = self.socket.recv(1024)
                    f.write(line)
                    recv_size += len(line)
                    print('总大小:%s 已上传大小:%s' % (total_size, recv_size))
        else:
            print('文件不存在')

    def run(self):
        while True:
            #1.发送命令
            inp = input('>>:')
            if not inp:continue
            cmd = inp.split()[0]
            self.socket.send(inp.encode('utf-8'))
            if hasattr(self, cmd):
                func = getattr(self, cmd)
                func(inp)

obj = MYTCPClient(('127.1.1.1', 8808))
obj.run()
View Code

转载于:https://www.cnblogs.com/Mryang123/p/8833861.html

weixin_30822451
关注
  • 0
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值