ESTBPM3-Activiti5在线流程设计器开发

于 2012-08-13 14:28:00 发布
阅读量111 收藏
点赞数
文章标签： 前端 开发工具 嵌入式 ViewUI
原文链接：http://www.cnblogs.com/hanks47/archive/2012/08/13/2636357.html
版权

      jbpm4的开发成员tom离开了jboss后，加入afresco公司，并且才有activiti5的项目，这开源项目继承了jbpm4的所有优点，同时将其发扬光大，相对jbpm4，activiti5改进了储多我们国内开发人员关心的问题，如：

    流程代办
    在线流程设计器
    流程嵌入式部署
    流程独立部署
    动流程节点
    自由流程
    支持了bpmn2的标准
    支持规则引擎

      activiti 5 底层上的api跟jbpm4的api相似程序也达60%以上，特别是service提供的接口，都是在jbpm4上提供扩展，大大方便了jbpm4的开发 人员，这也是tom的先明之处，毕竟jbpm原来打的品牌效应不可否认的，把原来的jbpm4积累的人气再次带至activiti5上，这也将是该项目能 够断续前进的重要保障。


     尽管activiti5目前发展趋势前途光明，但其也有不足的地方，其前端的的表现总是存在不足，如在线流程设计器，目前eclipse插件生成的 bpmn20.xml文件则不行，而官方提供的activiti-modler设计器，扩展及实现均面临困难，并且对浏览器的要求让它在国内的项目实施总 会面临技术难度。


     宏天estbpm3则又是一个基于activiti5的产品，并且公司也有打算断续原来的产品销售模式，对企业开放源代码，而原来的设计器通过改进后，则可以直接支持activiti5的流程设计的需要，如：

设计器按设计器生成一份文档格式，通过系统中提供的xslt转化文档，完成转化后，生成bpmn20的格式文档，该文档可被activiti5直接识别。

其设计器及转化效果如下所示：

发布后，通过activiti5的api生成的流程图如下所示：

设计器原生成的文档格式：

    <diagram xmlns:bg="bpm.graphic" xmlns:ciied="com.hotent.bpm.editor"  
        xmlns:fg="flash.geom">  
        <bg:Task id="task1" height="50" user="true" width="90" x="230"  
            y="110">  
            <label>用户任务1</label>  
            <ports>  
                <ciied:Port id="port1" clipOnShape="true" movable="false" />  
                <ciied:Port id="port2" x="0" />  
                <ciied:Port id="port3" y="1" />  
                <ciied:Port id="port4" clipOnShape="true" movable="false">  
                    <id>CENTER</id>  
                </ciied:Port>  
            </ports>  
        </bg:Task>  
        <bg:StartEvent id="startEvent1" height="46" width="31" x="60"  
            y="119.5">  
            <label>开始</label>  
            <ports>  
                <ciied:Port id="port5" clipOnShape="true" movable="false" />  
                <ciied:Port id="port6" x="1" />  
                <ciied:Port id="port7" clipOnShape="true" movable="false">  
                    <id>CENTER</id>  
                </ciied:Port>  
            </ports>  
        </bg:StartEvent>  
        <bg:SubProcess id="subProcess1" automaticGraphLayout="false"  
            expandedHeight="210" expandedWidth="570" height="210" width="570" x="360"  
            y="230">  
            <label>子流程</label>  
            <ports>  
                <ciied:Port id="port8" clipOnShape="true" movable="false" />  
                <ciied:Port id="port9" x="0" />  
                <ciied:Port id="port10" y="0" />  
                <ciied:Port id="port11" clipOnShape="true" movable="false">  
                    <id>CENTER</id>  
                </ciied:Port>  
                <ciied:Port id="port12" horizontalOffset="-5" y="1">  
                    <id>BOTTOM</id>  
                </ciied:Port>  
                <ciied:Port id="port13" horizontalOffset="5" y="1">  
                    <id>BOTTOM</id>  
                </ciied:Port>  
            </ports>  
            <bg:Task id="task2" height="50" user="true" width="90" x="180"  
                y="53">  
                <label>用户任务2</label>  
                <ports>  
                    <ciied:Port id="port14" clipOnShape="true" movable="false" />  
                    <ciied:Port id="port15" x="0" />  
                    <ciied:Port id="port16" x="1" />  
                    <ciied:Port id="port17" clipOnShape="true" movable="false">  
                        <id>CENTER</id>  
                    </ciied:Port>  
                </ports>  
            </bg:Task>  
            <bg:StartEvent id="startEvent2" height="46" width="32"  
                x="29" y="62.5">  
                <label>开始2</label>  
                <ports>  
                    <ciied:Port id="port18" clipOnShape="true" movable="false" />  
                    <ciied:Port id="port19" x="1" />  
                    <ciied:Port id="port20" clipOnShape="true" movable="false">  
                        <id>CENTER</id>  
                    </ciied:Port>  
                </ports>  
            </bg:StartEvent>  
            <bg:SequenceFlow id="sequenceFlow1" endPort="port15"  
                startPort="port19">  
                <fallbackEndPoint>  
                    <fg:Point id="point1" x="198" y="58" />  
                </fallbackEndPoint>  
                <fallbackStartPoint>  
                    <fg:Point id="point2" />  
                </fallbackStartPoint>  
                <label></label>  
            </bg:SequenceFlow>  
            <bg:EndEvent id="endEvent1" height="49" width="34" x="380"  
                y="61">  
                <label>结束2</label>  
                <ports>  
                    <ciied:Port id="port21" clipOnShape="true" movable="false" />  
                    <ciied:Port id="port22" x="0" />  
                    <ciied:Port id="port23" clipOnShape="true" movable="false">  
                        <id>CENTER</id>  
                    </ciied:Port>  
                </ports>  
            </bg:EndEvent>  
            <bg:SequenceFlow id="sequenceFlow2" endPort="port22"  
                startPort="port16">  
                <fallbackEndPoint>  
                    <fg:Point id="point3" x="364" y="68" />  
                </fallbackEndPoint>  
                <fallbackStartPoint>  
                    <fg:Point id="point4" />  
                </fallbackStartPoint>  
                <label></label>  
            </bg:SequenceFlow>  
        </bg:SubProcess>  
        <bg:EndEvent id="endEvent2" height="49" width="34" x="740"  
            y="120">  
            <label>结束1</label>  
            <ports>  
                <ciied:Port id="port24" clipOnShape="true" movable="false" />  
                <ciied:Port id="port25" x="0" />  
                <ciied:Port id="port26" clipOnShape="true" movable="false">  
                    <id>CENTER</id>  
                </ciied:Port>  
            </ports>  
        </bg:EndEvent>  
        <bg:SequenceFlow id="sequenceFlow3" endPort="port2"  
            startPort="port6">  
            <fallbackEndPoint>  
                <fg:Point id="point5" x="237" y="125" />  
            </fallbackEndPoint>  
            <fallbackStartPoint>  
                <fg:Point id="point6" />  
            </fallbackStartPoint>  
            <label></label>  
        </bg:SequenceFlow>  
        <bg:SequenceFlow id="sequenceFlow4" endPort="port9"  
            startPort="port3">  
            <fallbackEndPoint>  
                <fg:Point id="point7" x="396" y="461" />  
            </fallbackEndPoint>  
            <fallbackStartPoint>  
                <fg:Point id="point8" />  
            </fallbackStartPoint>  
            <label></label>  
        </bg:SequenceFlow>  
        <bg:SequenceFlow id="sequenceFlow5" endPort="port25"  
            startPort="port10">  
            <fallbackEndPoint>  
                <fg:Point id="point9" x="674" y="191" />  
            </fallbackEndPoint>  
            <fallbackStartPoint>  
                <fg:Point id="point10" />  
            </fallbackStartPoint>  
            <label></label>  
        </bg:SequenceFlow>  
        <bg:Task id="task3" height="50" user="true" width="90" x="440"  
            y="520">  
            <label>用户任务3</label>  
            <ports>  
                <ciied:Port id="port27" clipOnShape="true" movable="false">  
                    <id>CENTER</id>  
                </ciied:Port>  
                <ciied:Port id="port28" y="0">  
                    <id>TOP</id>  
                </ciied:Port>  
                <ciied:Port id="port29" y="1">  
                    <id>BOTTOM</id>  
                </ciied:Port>  
            </ports>  
        </bg:Task>  
        <bg:SequenceFlow id="sequenceFlow6" endPort="port28"  
            startPort="port12">  
            <fallbackEndPoint>  
                <fg:Point id="point11" x="623" y="568" />  
            </fallbackEndPoint>  
            <fallbackStartPoint>  
                <fg:Point id="point12" />  
            </fallbackStartPoint>  
            <label></label>  
        </bg:SequenceFlow>  
        <bg:Task id="task4" height="50" user="true" width="90" x="750"  
            y="520">  
            <label>用户任务4</label>  
            <ports>  
                <ciied:Port id="port30" clipOnShape="true" movable="false">  
                    <id>CENTER</id>  
                </ciied:Port>  
                <ciied:Port id="port31" y="0">  
                    <id>TOP</id>  
                </ciied:Port>  
                <ciied:Port id="port32" y="1">  
                    <id>BOTTOM</id>  
                </ciied:Port>  
            </ports>  
        </bg:Task>  
        <bg:SequenceFlow id="sequenceFlow7" endPort="port31"  
            startPort="port13">  
            <fallbackEndPoint>  
                <fg:Point id="point13" x="760" y="536" />  
            </fallbackEndPoint>  
            <fallbackStartPoint>  
                <fg:Point id="point14" />  
            </fallbackStartPoint>  
            <label></label>  
        </bg:SequenceFlow>  
        <bg:EndEvent id="endEvent3" height="49" width="34" x="620"  
            y="630">  
            <label>结束3</label>  
            <ports>  
                <ciied:Port id="port33" clipOnShape="true" movable="false">  
                    <id>CENTER</id>  
                </ciied:Port>  
                <ciied:Port id="port34" x="1">  
                    <id>RIGHT</id>  
                </ciied:Port>  
                <ciied:Port id="port35" x="0">  
                    <id>LEFT</id>  
                </ciied:Port>  
            </ports>  
        </bg:EndEvent>  
        <bg:SequenceFlow id="sequenceFlow8" endPort="port35"  
            startPort="port29">  
            <fallbackEndPoint>  
                <fg:Point id="point15" x="632" y="653" />  
            </fallbackEndPoint>  
            <fallbackStartPoint>  
                <fg:Point id="point16" />  
            </fallbackStartPoint>  
            <label></label>  
        </bg:SequenceFlow>  
        <bg:SequenceFlow id="sequenceFlow9" endPort="port34"  
            startPort="port32">  
            <fallbackEndPoint>  
                <fg:Point id="point17" x="688" y="651" />  
            </fallbackEndPoint>  
            <fallbackStartPoint>  
                <fg:Point id="point18" />  
            </fallbackStartPoint>  
            <label></label>  
        </bg:SequenceFlow>  
    </diagram>

通过XSLT转化后的文档格式：

    <?xml version="1.0" encoding="utf-8"?>  
    <definitions xmlns="http://www.omg.org/spec/BPMN/20100524/MODEL"  
        xmlns:ciied="com.ibm.ilog.elixir.diagram" xmlns:bg="bpm.graphic"  
        xmlns:fn="http://www.w3.org/2005/02/xpath-functions" xmlns:omgdi="http://www.omg.org/spec/DD/20100524/DI"  
        xmlns:omgdc="http://www.omg.org/spec/DD/20100524/DC" xmlns:bpmndi="http://www.omg.org/spec/BPMN/20100524/DI"  
        xmlns:activiti="http://activiti.org/bpmn" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"  
        targetNamespace="http://www.activiti.org/test" expressionLanguage="http://www.w3.org/1999/XPath"  
        typeLanguage="http://www.w3.org/2001/XMLSchema">  
        <process id="subGraph2" name="子流程">  
            <startEvent id="startEvent1" name="开始" />  
            <endEvent id="endEvent2" name="结束1" />  
            <endEvent id="endEvent3" name="结束3" />  
            <userTask id="task1" name="用户任务1" />  
            <userTask id="task3" name="用户任务3" />  
            <userTask id="task4" name="用户任务4" />  
            <sequenceFlow id="sequenceFlow3" name="" sourceRef="startEvent1"  
                targetRef="task1" />  
            <sequenceFlow id="sequenceFlow4" name="" sourceRef="task1"  
                targetRef="subProcess1" />  
            <sequenceFlow id="sequenceFlow5" name="" sourceRef="subProcess1"  
                targetRef="endEvent2" />  
            <sequenceFlow id="sequenceFlow6" name="" sourceRef="subProcess1"  
                targetRef="task3" />  
            <sequenceFlow id="sequenceFlow7" name="" sourceRef="subProcess1"  
                targetRef="task4" />  
            <sequenceFlow id="sequenceFlow8" name="" sourceRef="task3"  
                targetRef="endEvent3" />  
            <sequenceFlow id="sequenceFlow9" name="" sourceRef="task4"  
                targetRef="endEvent3" />  
            <subProcess id="subProcess1" name="子流程">  
                <startEvent id="startEvent2" name="开始2" />  
                <endEvent id="endEvent1" name="结束2" />  
                <userTask id="task2" name="用户任务2" />  
                <sequenceFlow id="sequenceFlow1" name="" sourceRef="startEvent2"  
                    targetRef="task2" />  
                <sequenceFlow id="sequenceFlow2" name="" sourceRef="task2"  
                    targetRef="endEvent1" />  
            </subProcess>  
        </process>  
        <bpmndi:BPMNDiagram id="BPMNDiagram_subGraph2">  
            <bpmndi:BPMNPlane bpmnElement="subGraph2" id="BPMNPlane_subGraph2">  
                <bpmndi:BPMNShape bpmnElement="startEvent1"  
                    id="BPMNShape_startEvent1">  
                    <omgdc:Bounds height="31" width="31" x="60" y="119.5" />  
                </bpmndi:BPMNShape>  
                <bpmndi:BPMNShape bpmnElement="startEvent2"  
                    id="BPMNShape_startEvent2">  
                    <omgdc:Bounds height="32" width="32" x="389.0" y="292.5" />  
                </bpmndi:BPMNShape>  
                <bpmndi:BPMNShape bpmnElement="endEvent1" id="BPMNShape_endEvent1">  
                    <omgdc:Bounds height="34" width="34" x="740.0" y="291.0" />  
                </bpmndi:BPMNShape>  
                <bpmndi:BPMNShape bpmnElement="endEvent2" id="BPMNShape_endEvent2">  
                    <omgdc:Bounds height="34" width="34" x="740" y="120" />  
                </bpmndi:BPMNShape>  
                <bpmndi:BPMNShape bpmnElement="endEvent3" id="BPMNShape_endEvent3">  
                    <omgdc:Bounds height="34" width="34" x="620" y="630" />  
                </bpmndi:BPMNShape>  
                <bpmndi:BPMNShape bpmnElement="task1" id="BPMNShape_task1">  
                    <omgdc:Bounds height="50" width="90" x="230" y="110" />  
                </bpmndi:BPMNShape>  
                <bpmndi:BPMNShape bpmnElement="task2" id="BPMNShape_task2">  
                    <omgdc:Bounds height="50" width="90" x="540.0" y="283.0" />  
                </bpmndi:BPMNShape>  
                <bpmndi:BPMNShape bpmnElement="task3" id="BPMNShape_task3">  
                    <omgdc:Bounds height="50" width="90" x="440" y="520" />  
                </bpmndi:BPMNShape>  
                <bpmndi:BPMNShape bpmnElement="task4" id="BPMNShape_task4">  
                    <omgdc:Bounds height="50" width="90" x="750" y="520" />  
                </bpmndi:BPMNShape>  
                <bpmndi:BPMNShape bpmnElement="subProcess1"  
                    id="BPMNShape_subProcess1">  
                    <omgdc:Bounds height="210" width="570" x="360" y="230" />  
                </bpmndi:BPMNShape>  
                <bpmndi:BPMNEdge bpmnElement="sequenceFlow1" id="BPMNEdge_sequenceFlow1">  
                    <omgdi:waypoint x="421.0" y="308.5"></omgdi:waypoint>  
                    <omgdi:waypoint x="480.5" y="308.5"></omgdi:waypoint>  
                    <omgdi:waypoint x="480.5" y="308.0"></omgdi:waypoint>  
                    <omgdi:waypoint x="540.0" y="308.0"></omgdi:waypoint>  
                </bpmndi:BPMNEdge>  
                <bpmndi:BPMNEdge bpmnElement="sequenceFlow2" id="BPMNEdge_sequenceFlow2">  
                    <omgdi:waypoint x="630.0" y="308.0"></omgdi:waypoint>  
                    <omgdi:waypoint x="740.0" y="308.0"></omgdi:waypoint>  
                </bpmndi:BPMNEdge>  
                <bpmndi:BPMNEdge bpmnElement="sequenceFlow3" id="BPMNEdge_sequenceFlow3">  
                    <omgdi:waypoint x="91.0" y="135.0"></omgdi:waypoint>  
                    <omgdi:waypoint x="230.0" y="135.0"></omgdi:waypoint>  
                </bpmndi:BPMNEdge>  
                <bpmndi:BPMNEdge bpmnElement="sequenceFlow4" id="BPMNEdge_sequenceFlow4">  
                    <omgdi:waypoint x="275.0" y="160.0"></omgdi:waypoint>  
                    <omgdi:waypoint x="275.0" y="335.0"></omgdi:waypoint>  
                    <omgdi:waypoint x="360.0" y="335.0"></omgdi:waypoint>  
                </bpmndi:BPMNEdge>  
                <bpmndi:BPMNEdge bpmnElement="sequenceFlow5" id="BPMNEdge_sequenceFlow5">  
                    <omgdi:waypoint x="645.0" y="230.0"></omgdi:waypoint>  
                    <omgdi:waypoint x="645.0" y="137.0"></omgdi:waypoint>  
                    <omgdi:waypoint x="740.0" y="137.0"></omgdi:waypoint>  
                </bpmndi:BPMNEdge>  
                <bpmndi:BPMNEdge bpmnElement="sequenceFlow6" id="BPMNEdge_sequenceFlow6">  
                    <omgdi:waypoint x="640.0" y="440.0"></omgdi:waypoint>  
                    <omgdi:waypoint x="640.0" y="480.0"></omgdi:waypoint>  
                    <omgdi:waypoint x="485.0" y="480.0"></omgdi:waypoint>  
                    <omgdi:waypoint x="485.0" y="520.0"></omgdi:waypoint>  
                </bpmndi:BPMNEdge>  
                <bpmndi:BPMNEdge bpmnElement="sequenceFlow7" id="BPMNEdge_sequenceFlow7">  
                    <omgdi:waypoint x="650.0" y="440.0"></omgdi:waypoint>  
                    <omgdi:waypoint x="650.0" y="480.0"></omgdi:waypoint>  
                    <omgdi:waypoint x="795.0" y="480.0"></omgdi:waypoint>  
                    <omgdi:waypoint x="795.0" y="520.0"></omgdi:waypoint>  
                </bpmndi:BPMNEdge>  
                <bpmndi:BPMNEdge bpmnElement="sequenceFlow8" id="BPMNEdge_sequenceFlow8">  
                    <omgdi:waypoint x="485.0" y="570.0"></omgdi:waypoint>  
                    <omgdi:waypoint x="485.0" y="647.0"></omgdi:waypoint>  
                    <omgdi:waypoint x="620.0" y="647.0"></omgdi:waypoint>  
                </bpmndi:BPMNEdge>  
                <bpmndi:BPMNEdge bpmnElement="sequenceFlow9" id="BPMNEdge_sequenceFlow9">  
                    <omgdi:waypoint x="795.0" y="570.0"></omgdi:waypoint>  
                    <omgdi:waypoint x="795.0" y="647.0"></omgdi:waypoint>  
                    <omgdi:waypoint x="654.0" y="647.0"></omgdi:waypoint>  
                </bpmndi:BPMNEdge>  
            </bpmndi:BPMNPlane>  
        </bpmndi:BPMNDiagram>  
    </definitions>

转成后，则直接通过以下api可发布至流程引擎：

 

    Deployment deployment= repositoryService.createDeployment().name(bpmDefinition.getSubject()).addString(bpmDefinition.getSubject()+".bpmn20.xml",actFlowDefXml).deploy();

 

 

 

转载于:https://www.cnblogs.com/hanks47/archive/2012/08/13/2636357.html

weixin_30848775
关注
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值