Detailed Manual of Hongxing Hammer Crusher Three

2、inspection and operation in the function

During the normal operation, we should not forcely start the equipment before we find out the trouble if there has happened the machine halt .And we can clean out the materials from the crushing cavity and to process the operation according to the sequence.

Attention ,we should give a timely processing when there have happened the malfunction like abnormal sounds out of friction or beating between the hammer and grates .

After we shut down the machine, we should also inspect the wearing condition of the hammer, inner plate and discharging grate. Besides ,maintenance to the equipment is one of the key factors to extend the service life .And the normal maintenance are mainly including the cleaning equipment, bolts fasten ,better lubrication, mechanical parts adjustment .which are very closely to the operation .

According to the structures of the equipment, the reasonable choice and lubrication materials are the main factors in the equipment maintenance .And we often adopt two kinds of lubrication oil such as grease and lubricating oil .And the grease are often applied in the dusty places with easy grease seal and bearing with no dust so the grease is the better choice to the hammer crusher.

The operator should insist in three principles like using better ,controlling better and fix better; and four abilities like better using ability ,better maintenance ability ,better inspection ability ,better troubleshooting ability ;and also the four free principles like no dust, no sundries ,no oil founding and no loosing .And with all of the advantages ,we can ensure the normal function to exert the better technical performance .

Safety Regulation

To ensure the secure production, and no equipment accidents and human injury, we must abide by the safety systems and the operation regulations.

1、Emergency malfunction has happened during the normal function, we can firstly to shut down the machine to inspect the situation .And we should not forcely start the machine before we clean put the malfunction.

2、If the electrical equipment have happened the malfunction ,the electricianr should take charge of it and other people should not touch the electric equipment .

3、When we inspect the crusher and process the crushing trouble shooting and inspection ,we should take off the equipment insurance from the electric equipment and hang off the boards with the inspection signal if not ,we should not stretch out our hands into the machine body. And when we begin to test the machine after the inspection ,we should give a complete cover to the cap and fasten the bolts .If the inspection quality do not achieve the inspection quality and have influenced the equipment function ,the machine should not be put into the function .

4、All the safety guard equipment should be complete and compact.

As the professional manufacturer of complete sets of mining machinery, such as Clinker rotary kiln,china vibrating feeder,mobile crushers,Bucket sand washer, Henan Hongxing is always doing the best in products and service.

转载于:https://www.cnblogs.com/liajones/archive/2012/02/10/2345097.html