S3C6410嵌入式应用平台构建（五）——linux-3.14.4移植到OK6410-(Nand分区问题)

最新推荐文章于 2017-09-13 21:38:04 发布
最新推荐文章于 2017-09-13 21:38:04 发布
阅读量163 收藏
点赞数
原文链接：http://www.cnblogs.com/lixiaoming90/p/3776227.html
版权

前一篇文章，我们的Linux能后启动了，只是在识别nand时候，没有获取到时钟源，导致后面的分区没哟进行。

     我们从启动的log发现：

[06/08-11:25:41:371]s3c24xx-nand s3c6400-nand: failed to get clock
[06/08-11:25:41:371]s3c24xx-nand: probe of s3c6400-nand failed with error –2

  于是追踪到代码：

nandflash驱动中——s3c2410.c中

	/* get the clock source and enable it */

	info->clk = devm_clk_get(&pdev->dev, "nand");
	if (IS_ERR(info->clk)) {
		dev_err(&pdev->dev, "failed to get clock\n");
		err = -ENOENT;
		goto exit_error;
	}

发现在去find “nand”clock source时，获取不到，因此，我们打开S3c2410.c (drivers\mtd\nand) 

于是打开Clk-s3c64xx.c (drivers\clk\samsung) 

发现在Aliases时，并没有Aliases nand,因此我试着加了以下代码：ALIAS(MEM0_NFCON, "s3c6400-nand", "nand"),

/* Aliases for s3c6410-specific clocks. */
static struct samsung_clock_alias s3c6410_clock_aliases[] = {
	ALIAS(PCLK_IIC1, "s3c2440-i2c.1", "i2c"),
	ALIAS(PCLK_IIS2, "samsung-i2s.2", "iis"),
	ALIAS(SCLK_FIMC, "s3c-camif", "fimc"),
	ALIAS(SCLK_AUDIO2, "samsung-i2s.2", "audio-bus"),
	
	ALIAS(MEM0_SROM, NULL, "srom"),
};

这样的话，当去clk_get时，应该不会有问题了。

这个机制是linux-3.10后才加的，这个问题卡了我好久。

我们make uImage后测试如下：

[06/08-14:18:26:542]U-Boot 2010.03-svn3 (May 06 2014 - 22:13:20) for SMDK6410
[06/08-14:18:26:543]
[06/08-14:18:26:543]*******************************************************
[06/08-14:18:26:553]                Welcome to Embedded System
[06/08-14:18:26:553]                Base On S3C6410 Devolopment
[06/08-14:18:26:554]                Date:   2014/4/15 22:00 PM
[06/08-14:18:26:565]*******************************************************
[06/08-14:18:26:565]
[06/08-14:18:26:565]CPU:     S3C6410@533MHz
[06/08-14:18:26:566]         Fclk = 533MHz, Hclk = 133MHz, Pclk = 66MHz (ASYNC Mode) 
[06/08-14:18:26:566]Board:   SMDK6410
[06/08-14:18:26:572]DRAM:  256 MB
[06/08-14:18:26:612]Flash:  0 kB
[06/08-14:18:26:613]NAND Flash:  2048 MB
[06/08-14:18:27:734]********************************************************
[06/08-14:18:27:735]Initial LCD controller
[06/08-14:18:27:748]  clk_freq:9 MHz,  div_freq:13 ,rea_freq:9 MHz 
[06/08-14:18:27:749]
[06/08-14:18:27:749] HBP = 2 HFP = 2 HSW = 41,Hpixs:480
[06/08-14:18:27:749] VBP = 2 VFP = 2 VSW = 10,Vpixs:272
[06/08-14:18:27:766]FrameBuff:57e7a000
[06/08-14:18:27:766]  LCD initialization Finished. 
[06/08-14:18:27:766]********************************************************
[06/08-14:18:27:787]In:    serial
[06/08-14:18:27:787]
[06/08-14:18:27:787]Out:   lcd
[06/08-14:18:27:789]
[06/08-14:18:27:789]Err:   lcd
[06/08-14:18:27:789]
[06/08-14:18:28:141]Net:   DM9000
[06/08-14:18:29:160]Hit any key to stop autoboot:  0 
[06/08-14:18:29:160]
[06/08-14:18:29:161]NAND read: 
[06/08-14:18:29:161]device 0 offset 0x100000, size 0x500000
[06/08-14:18:29:162]
[06/08-14:18:32:403] 5242880 bytes read: OK
[06/08-14:18:32:403]
[06/08-14:18:32:404]## Booting kernel from Legacy Image at 50008000 ...
[06/08-14:18:32:404]
[06/08-14:18:32:404]   Image Name:   Linux-3.14.4
[06/08-14:18:32:421]
[06/08-14:18:32:422]   Image Type:   ARM Linux Kernel Image (uncompressed)
[06/08-14:18:32:441]
[06/08-14:18:32:441]   Data Size:    1638504 Bytes =  1.6 MB
[06/08-14:18:32:457]
[06/08-14:18:32:458]   Load Address: 50008000
[06/08-14:18:32:474]
[06/08-14:18:32:475]   Entry Point:  50008040
[06/08-14:18:32:490]
[06/08-14:18:32:818]   Verifying Checksum ... OK
[06/08-14:18:32:836]
[06/08-14:18:32:836]   XIP Kernel Image ... OK
[06/08-14:18:32:850]
[06/08-14:18:32:851]OK
[06/08-14:18:32:868]
[06/08-14:18:32:868]
[06/08-14:18:32:868]Starting kernel ...
[06/08-14:18:32:869]
[06/08-14:18:32:879]
[06/08-14:18:32:894]
[06/08-14:18:32:908]
[06/08-14:18:33:199]Uncompressing Linux... done, booting the kernel.
[06/08-14:18:33:995]Booting Linux on physical CPU 0x0
[06/08-14:18:34:006]Linux version 3.14.4 (simiar@Embedded) (gcc version 4.4.3 (ctng-1.6.1) ) #2 Sun Jun 8 14:10:57 CST 2014
[06/08-14:18:34:010]CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387d
[06/08-14:18:34:017]CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[06/08-14:18:34:017]Machine: OK6410
[06/08-14:18:34:018]Ignoring unrecognised tag 0x54410008
[06/08-14:18:34:030]Memory policy: Data cache writeback
[06/08-14:18:34:030]CPU S3C6410 (id 0x36410101)
[06/08-14:18:34:031]CPU: found DTCM0 8k @ 00000000, not enabled
[06/08-14:18:34:032]CPU: moved DTCM0 8k to fffe8000, enabled
[06/08-14:18:34:039]CPU: found DTCM1 8k @ 00000000, not enabled
[06/08-14:18:34:040]CPU: moved DTCM1 8k to fffea000, enabled
[06/08-14:18:34:040]CPU: found ITCM0 8k @ 00000000, not enabled
[06/08-14:18:34:051]CPU: moved ITCM0 8k to fffe0000, enabled
[06/08-14:18:34:051]CPU: found ITCM1 8k @ 00000000, not enabled
[06/08-14:18:34:052]CPU: moved ITCM1 8k to fffe2000, enabled
[06/08-14:18:34:061]Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[06/08-14:18:34:072]Kernel command line: root=/dev/nfs nfsroot=192.168.1.100:/home/simiar/share/myproject/ok6410/filesystem/ok6410_fs ip=192.168.1.50:192.168.1.100:192.168.1.1:255.255.255.0::eth0:off console=ttySAC0,115200
[06/08-14:18:34:084]PID hash table entries: 1024 (order: 0, 4096 bytes)
[06/08-14:18:34:095]Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[06/08-14:18:34:096]Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[06/08-14:18:34:105]Memory: 256464K/262144K available (2173K kernel code, 175K rwdata, 664K rodata, 118K init, 198K bss, 5680K reserved)
[06/08-14:18:34:108]Virtual kernel memory layout:
[06/08-14:18:34:118]    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[06/08-14:18:34:118]    DTCM    : 0xfffe8000 - 0xfffec000   (  16 kB)
[06/08-14:18:34:119]    ITCM    : 0xfffe0000 - 0xfffe4000   (  16 kB)
[06/08-14:18:34:129]    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[06/08-14:18:34:130]    vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[06/08-14:18:34:140]    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[06/08-14:18:34:140]    modules : 0xbf000000 - 0xc0000000   (  16 MB)
[06/08-14:18:34:144]      .text : 0xc0008000 - 0xc02cd674   (2838 kB)
[06/08-14:18:34:150]      .init : 0xc02ce000 - 0xc02eb99c   ( 119 kB)
[06/08-14:18:34:153]      .data : 0xc02ec000 - 0xc0317f00   ( 176 kB)
[06/08-14:18:34:162]       .bss : 0xc0318000 - 0xc0349ac8   ( 199 kB)
[06/08-14:18:34:162]SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[06/08-14:18:34:163]NR_IRQS:246
[06/08-14:18:34:172]S3C6410 clocks: apll = 533000000, mpll = 533000000
[06/08-14:18:34:173]        epll = 24000000, arm_clk = 533000000
[06/08-14:18:34:173]VIC @f6000000: id 0x00041192, vendor 0x41
[06/08-14:18:34:184]VIC @f6010000: id 0x00041192, vendor 0x41
[06/08-14:18:34:185]sched_clock: 32 bits at 33MHz, resolution 30ns, wraps every 128929599457ns
[06/08-14:18:34:185]Console: colour dummy device 80x30
[06/08-14:18:34:194]Calibrating delay loop... 531.66 BogoMIPS (lpj=2658304)
[06/08-14:18:34:195]pid_max: default: 32768 minimum: 301
[06/08-14:18:34:207]Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[06/08-14:18:34:207]Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[06/08-14:18:34:208]CPU: Testing write buffer coherency: ok
[06/08-14:18:34:217]Setting up static identity map for 0x50214f90 - 0x50214fec
[06/08-14:18:34:228]VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[06/08-14:18:34:229]DMA: preallocated 256 KiB pool for atomic coherent allocations
[06/08-14:18:34:230]OK6410: Option string ok6410=0
[06/08-14:18:34:239]OK6410: selected LCD display is 480x272
[06/08-14:18:34:240]S3C6410: Initialising architecture
[06/08-14:18:34:240]bio: create slab <bio-0> at 0
[06/08-14:18:34:252]pl08xdmac dma-pl080s.0: initialized 8 virtual memcpy channels
[06/08-14:18:34:253]pl08xdmac dma-pl080s.0: initialized 16 virtual slave channels
[06/08-14:18:34:263]pl08xdmac dma-pl080s.0: DMA: PL080s rev1 at 0x75000000 irq 73
[06/08-14:18:34:263]pl08xdmac dma-pl080s.1: initialized 8 virtual memcpy channels
[06/08-14:18:34:273]pl08xdmac dma-pl080s.1: initialized 12 virtual slave channels
[06/08-14:18:34:273]pl08xdmac dma-pl080s.1: DMA: PL080s rev1 at 0x75100000 irq 74
[06/08-14:18:34:274]usbcore: registered new interface driver usbfs
[06/08-14:18:34:283]usbcore: registered new interface driver hub
[06/08-14:18:34:284]usbcore: registered new device driver usb
[06/08-14:18:34:296]Switched to clocksource samsung_clocksource_timer
[06/08-14:18:34:296]futex hash table entries: 256 (order: 0, 7168 bytes)
[06/08-14:18:34:296]ROMFS MTD (C) 2007 Red Hat, Inc.
[06/08-14:18:34:297]io scheduler noop registered
[06/08-14:18:34:306]io scheduler deadline registered
[06/08-14:18:34:306]io scheduler cfq registered (default)
[06/08-14:18:34:307]s3c-fb s3c-fb: window 0: fb 
[06/08-14:18:34:317]Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[06/08-14:18:34:318]s3c6400-uart.0: ttySAC0 at MMIO 0x7f005000 (irq = 69, base_baud = 0) is a S3C6400/10
[06/08-14:18:34:329]console [ttySAC0] enabled
[06/08-14:18:34:330]s3c6400-uart.1: ttySAC1 at MMIO 0x7f005400 (irq = 70, base_baud = 0) is a S3C6400/10
[06/08-14:18:34:339]s3c6400-uart.2: ttySAC2 at MMIO 0x7f005800 (irq = 71, base_baud = 0) is a S3C6400/10
[06/08-14:18:34:345]s3c6400-uart.3: ttySAC3 at MMIO 0x7f005c00 (irq = 72, base_baud = 0) is a S3C6400/10
[06/08-14:18:34:377]brd: module loaded
[06/08-14:18:34:396]loop: module loaded
[06/08-14:18:34:405]------------[ cut here ]------------
[06/08-14:18:34:407]WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:926 __clk_enable+0x94/0xa4()
[06/08-14:18:34:416]Modules linked in:
[06/08-14:18:34:417]CPU: 0 PID: 1 Comm: swapper Not tainted 3.14.4 #2
[06/08-14:18:34:428][<c0014238>] (unwind_backtrace) from [<c0011c74>] (show_stack+0x10/0x14)
[06/08-14:18:34:429][<c0011c74>] (show_stack) from [<c001c6ec>] (warn_slowpath_common+0x68/0x88)
[06/08-14:18:34:439][<c001c6ec>] (warn_slowpath_common) from [<c001c728>] (warn_slowpath_null+0x1c/0x24)
[06/08-14:18:34:439][<c001c728>] (warn_slowpath_null) from [<c0209fe8>] (__clk_enable+0x94/0xa4)
[06/08-14:18:34:450][<c0209fe8>] (__clk_enable) from [<c020a394>] (clk_enable+0x18/0x2c)
[06/08-14:18:34:461][<c020a394>] (clk_enable) from [<c01aafec>] (s3c2410_nand_clk_set_state+0x5c/0x64)
[06/08-14:18:34:462][<c01aafec>] (s3c2410_nand_clk_set_state) from [<c01ab594>] (s3c24xx_nand_probe+0x90/0x520)
[06/08-14:18:34:471][<c01ab594>] (s3c24xx_nand_probe) from [<c0189c78>] (platform_drv_probe+0x1c/0x4c)
[06/08-14:18:34:483][<c0189c78>] (platform_drv_probe) from [<c018873c>] (driver_probe_device+0x7c/0x200)
[06/08-14:18:34:484][<c018873c>] (driver_probe_device) from [<c018894c>] (__driver_attach+0x8c/0x90)
[06/08-14:18:34:494][<c018894c>] (__driver_attach) from [<c01871f0>] (bus_for_each_dev+0x68/0x8c)
[06/08-14:18:34:505][<c01871f0>] (bus_for_each_dev) from [<c0187964>] (bus_add_driver+0x124/0x1d4)
[06/08-14:18:34:505][<c0187964>] (bus_add_driver) from [<c0188ed4>] (driver_register+0x78/0xf8)
[06/08-14:18:34:516][<c0188ed4>] (driver_register) from [<c000878c>] (do_one_initcall+0x30/0x148)
[06/08-14:18:34:516][<c000878c>] (do_one_initcall) from [<c02ce4f8>] (kernel_init_freeable+0xe0/0x1ac)
[06/08-14:18:34:527][<c02ce4f8>] (kernel_init_freeable) from [<c0210b7c>] (kernel_init+0x8/0xec)
[06/08-14:18:34:539][<c0210b7c>] (kernel_init) from [<c000e838>] (ret_from_fork+0x14/0x3c)
[06/08-14:18:34:539]---[ end trace be0198ec65143d7a ]---

[06/08-14:18:34:573]------------[ cut here ]------------

[06/08-14:18:34:583]Internal error: Oops - BUG: 0 [#1] ARM
[06/08-14:18:34:583]Modules linked in:
[06/08-14:18:34:584]CPU: 0 PID: 1 Comm: swapper Tainted: G        W    3.14.4 #2
[06/08-14:18:34:594]task: cf844000 ti: cf836000 task.ti: cf836000
[06/08-14:18:34:594]PC is at nand_scan_tail+0x50c/0x6d0
[06/08-14:18:34:595]LR is at nand_scan_tail+0x50c/0x6d0
[06/08-14:18:34:606]pc : [<c01a4cfc>]    lr : [<c01a4cfc>]    psr: 60000153
[06/08-14:18:34:606]sp : cf837e30  ip : c030ebe4  fp : c01ab4f8
[06/08-14:18:34:607]r10: cf80a228  r9 : c01aab30  r8 : 00000001
[06/08-14:18:34:616]r7 : cf834780  r6 : cf80a010  r5 : cf80a010  r4 : cf80a228
[06/08-14:18:34:617]r3 : c02fc250  r2 : c02fc250  r1 : 200001d3  r0 : 0000002b
[06/08-14:18:34:627]Flags: nZCv  IRQs on  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
[06/08-14:18:34:628]Control: 00c5387d  Table: 50004008  DAC: 00000015
[06/08-14:18:34:639]Process swapper (pid: 1, stack limit = 0xcf8361b8)
[06/08-14:18:34:639]Stack: (0xcf837e30 to 0xcf838000)
[06/08-14:18:34:680]7e20:                                     cf90bc10 00000000 cf80a010 c01ab8a4
[06/08-14:18:34:682]7e40: 0000000c 00000001 c02eb874 cfa89000 00000000 c02f8f28 c0313c2c c02f8f28
[06/08-14:18:34:687]7e60: c0313c40 00000055 c02eb874 c02e5a48 00000000 c0189c78 c03491fc c0313c40
[06/08-14:18:34:688]7e80: c02f8f28 c018873c c02f8f28 c0313c40 c02f8f5c 00000000 00000055 c018894c
[06/08-14:18:34:688]7ea0: c0313c40 c01888c0 cf837eb0 c01871f0 cf803278 cf868160 00000000 c0313c40
[06/08-14:18:34:688]7ec0: cfa7f6c0 c030f4f8 00000000 c0187964 c0297ed0 00000007 cf836000 c0313c40
[06/08-14:18:34:691]7ee0: 00000007 cf836000 00000000 c0188ed4 c02e2b88 00000007 cf836000 c000878c
[06/08-14:18:34:694]7f00: c02ffd58 c0216f14 cf830900 c033b7dc cf837f00 60000153 c02fac88 60000153
[06/08-14:18:34:705]7f20: c02eb618 00000000 c02fac88 c02fac88 c02bbf48 cfffcd07 c02bbf58 c0033ccc
[06/08-14:18:34:706]7f40: c029b9e4 c02bba08 00000006 00000006 c02fac4c c02e5a40 00000007 c0318000
[06/08-14:18:34:717]7f60: c02ce5c4 00000055 c02eb874 c02e5a48 00000000 c02ce4f8 00000006 00000006
[06/08-14:18:34:718]7f80: c02ce5c4 c003e9ac 00000000 c0210b74 00000000 00000000 00000000 00000000
[06/08-14:18:34:727]7fa0: 00000000 c0210b7c 00000000 c000e838 00000000 00000000 00000000 00000000
[06/08-14:18:34:738]7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[06/08-14:18:34:739]7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 e5893004 e1a00004
[06/08-14:18:34:749][<c01a4cfc>] (nand_scan_tail) from [<c01ab8a4>] (s3c24xx_nand_probe+0x3a0/0x520)
[06/08-14:18:34:760][<c01ab8a4>] (s3c24xx_nand_probe) from [<c0189c78>] (platform_drv_probe+0x1c/0x4c)
[06/08-14:18:34:761][<c0189c78>] (platform_drv_probe) from [<c018873c>] (driver_probe_device+0x7c/0x200)
[06/08-14:18:34:771][<c018873c>] (driver_probe_device) from [<c018894c>] (__driver_attach+0x8c/0x90)
[06/08-14:18:34:772][<c018894c>] (__driver_attach) from [<c01871f0>] (bus_for_each_dev+0x68/0x8c)
[06/08-14:18:34:782][<c01871f0>] (bus_for_each_dev) from [<c0187964>] (bus_add_driver+0x124/0x1d4)
[06/08-14:18:34:794][<c0187964>] (bus_add_driver) from [<c0188ed4>] (driver_register+0x78/0xf8)
[06/08-14:18:34:795][<c0188ed4>] (driver_register) from [<c000878c>] (do_one_initcall+0x30/0x148)
[06/08-14:18:34:804][<c000878c>] (do_one_initcall) from [<c02ce4f8>] (kernel_init_freeable+0xe0/0x1ac)
[06/08-14:18:34:816][<c02ce4f8>] (kernel_init_freeable) from [<c0210b7c>] (kernel_init+0x8/0xec)
[06/08-14:18:34:817][<c0210b7c>] (kernel_init) from [<c000e838>] (ret_from_fork+0x14/0x3c)
[06/08-14:18:34:832]Code: e3510008 0a000030 e59f019c eb01b180 (e7f001f2) 
[06/08-14:18:34:832]---[ end trace be0198ec65143d7b ]---
[06/08-14:18:34:833]Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

从上面我们又发现出错以下信息：

[06/08-14:18:34:573]nand: No oob scheme defined for oobsize 218

[06/08-14:18:34:573]------------[ cut here ]------------

[06/08-14:18:34:574]kernel BUG at drivers/mtd/nand/nand_base.c:3732!

原来是我们的nandflash的oobsize是218，而nand_base.c中并没有加入218的处理，因此参照6410驱动，修改nand_base.c。做如下添加：

1. 添加nand_oob_218定义

static struct nand_ecclayout nand_oob_218 = {
	.eccbytes = 104,
	.eccpos = {
			24,25,26,27,28,29,30,31,32,33,
			34,35,36,37,38,39,40,41,42,43,
			44,45,46,47,48,49,50,51,52,53,
			54,55,56,57,58,59,60,61,62,63,
			64,65,66,67,68,69,70,71,72,73,
			74,75,76,77,78,79,80,81,82,83,
			84,85,86,87,88,89,90,91,92,93,
			94,95,96,97,98,99,100,101,102,103,
			104,105,106,107,108,109,110,111,112,113,
			114,115,116,117,118,119,120,121,122,123,
			124,125,126,127},
	.oobfree ={
		{.offset = 2,
		.length = 22} }
};

2. 添加case 218处理

		case 128:
			ecc->layout = &nand_oob_128;
			break;
		
		default:
			pr_warn("No oob scheme defined for oobsize %d\n",
				   mtd->oobsize);
			BUG();
		}

    好了，我们再次 make uImage后，下载到板子上，启动如下：

[06/08-14:28:27:608]U-Boot 2010.03-svn3 (May 06 2014 - 22:13:20) for SMDK6410
[06/08-14:28:27:608]
[06/08-14:28:27:608]*******************************************************
[06/08-14:28:27:619]                Welcome to Embedded System
[06/08-14:28:27:620]                Base On S3C6410 Devolopment
[06/08-14:28:27:620]                Date:   2014/4/15 22:00 PM
[06/08-14:28:27:630]*******************************************************
[06/08-14:28:27:631]
[06/08-14:28:27:631]CPU:     S3C6410@533MHz
[06/08-14:28:27:631]         Fclk = 533MHz, Hclk = 133MHz, Pclk = 66MHz (ASYNC Mode) 
[06/08-14:28:27:631]Board:   SMDK6410
[06/08-14:28:27:636]DRAM:  256 MB
[06/08-14:28:27:678]Flash:  0 kB
[06/08-14:28:27:679]NAND Flash:  2048 MB
[06/08-14:28:28:799]********************************************************
[06/08-14:28:28:799]Initial LCD controller
[06/08-14:28:28:812]  clk_freq:9 MHz,  div_freq:13 ,rea_freq:9 MHz 
[06/08-14:28:28:812]
[06/08-14:28:28:813] HBP = 2 HFP = 2 HSW = 41,Hpixs:480
[06/08-14:28:28:813] VBP = 2 VFP = 2 VSW = 10,Vpixs:272
[06/08-14:28:28:830]FrameBuff:57e7a000
[06/08-14:28:28:830]  LCD initialization Finished. 
[06/08-14:28:28:831]********************************************************
[06/08-14:28:28:852]In:    serial
[06/08-14:28:28:852]
[06/08-14:28:28:852]Out:   lcd
[06/08-14:28:28:855]
[06/08-14:28:28:855]Err:   lcd
[06/08-14:28:28:856]
[06/08-14:28:29:206]Net:   DM9000
[06/08-14:28:30:225]Hit any key to stop autoboot:  0 
[06/08-14:28:30:225]
[06/08-14:28:30:226]NAND read: 
[06/08-14:28:30:226]device 0 offset 0x100000, size 0x500000
[06/08-14:28:30:226]
[06/08-14:28:33:470] 5242880 bytes read: OK
[06/08-14:28:33:470]
[06/08-14:28:33:470]## Booting kernel from Legacy Image at 50008000 ...
[06/08-14:28:33:470]
[06/08-14:28:33:472]   Image Name:   Linux-3.14.4
[06/08-14:28:33:486]
[06/08-14:28:33:487]   Image Type:   ARM Linux Kernel Image (uncompressed)
[06/08-14:28:33:506]
[06/08-14:28:33:508]   Data Size:    1638624 Bytes =  1.6 MB
[06/08-14:28:33:522]
[06/08-14:28:33:523]   Load Address: 50008000
[06/08-14:28:33:540]
[06/08-14:28:33:540]   Entry Point:  50008040
[06/08-14:28:33:555]
[06/08-14:28:33:885]   Verifying Checksum ... OK
[06/08-14:28:33:901]
[06/08-14:28:33:902]   XIP Kernel Image ... OK
[06/08-14:28:33:915]
[06/08-14:28:33:916]OK
[06/08-14:28:33:933]
[06/08-14:28:33:933]
[06/08-14:28:33:933]Starting kernel ...
[06/08-14:28:33:934]
[06/08-14:28:33:945]
[06/08-14:28:33:959]
[06/08-14:28:33:973]
[06/08-14:28:34:265]Uncompressing Linux... done, booting the kernel.
[06/08-14:28:35:062]Booting Linux on physical CPU 0x0
[06/08-14:28:35:072]Linux version 3.14.4 (simiar@Embedded) (gcc version 4.4.3 (ctng-1.6.1) ) #3 Sun Jun 8 14:27:06 CST 2014
[06/08-14:28:35:076]CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387d
[06/08-14:28:35:092]CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[06/08-14:28:35:092]Machine: OK6410
[06/08-14:28:35:093]Ignoring unrecognised tag 0x54410008
[06/08-14:28:35:097]Memory policy: Data cache writeback
[06/08-14:28:35:097]CPU S3C6410 (id 0x36410101)
[06/08-14:28:35:097]CPU: found DTCM0 8k @ 00000000, not enabled
[06/08-14:28:35:098]CPU: moved DTCM0 8k to fffe8000, enabled
[06/08-14:28:35:106]CPU: found DTCM1 8k @ 00000000, not enabled
[06/08-14:28:35:106]CPU: moved DTCM1 8k to fffea000, enabled
[06/08-14:28:35:107]CPU: found ITCM0 8k @ 00000000, not enabled
[06/08-14:28:35:117]CPU: moved ITCM0 8k to fffe0000, enabled
[06/08-14:28:35:118]CPU: found ITCM1 8k @ 00000000, not enabled
[06/08-14:28:35:118]CPU: moved ITCM1 8k to fffe2000, enabled
[06/08-14:28:35:128]Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
[06/08-14:28:35:138]Kernel command line: root=/dev/nfs nfsroot=192.168.1.100:/home/simiar/share/myproject/ok6410/filesystem/ok6410_fs ip=192.168.1.50:192.168.1.100:192.168.1.1:255.255.255.0::eth0:off console=ttySAC0,115200
[06/08-14:28:35:151]PID hash table entries: 1024 (order: 0, 4096 bytes)
[06/08-14:28:35:161]Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[06/08-14:28:35:162]Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[06/08-14:28:35:171]Memory: 256460K/262144K available (2173K kernel code, 178K rwdata, 664K rodata, 118K init, 198K bss, 5684K reserved)
[06/08-14:28:35:173]Virtual kernel memory layout:
[06/08-14:28:35:184]    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[06/08-14:28:35:184]    DTCM    : 0xfffe8000 - 0xfffec000   (  16 kB)
[06/08-14:28:35:185]    ITCM    : 0xfffe0000 - 0xfffe4000   (  16 kB)
[06/08-14:28:35:197]    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[06/08-14:28:35:197]    vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[06/08-14:28:35:206]    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[06/08-14:28:35:207]    modules : 0xbf000000 - 0xc0000000   (  16 MB)
[06/08-14:28:35:208]      .text : 0xc0008000 - 0xc02cd674   (2838 kB)
[06/08-14:28:35:217]      .init : 0xc02ce000 - 0xc02eb99c   ( 119 kB)
[06/08-14:28:35:218]      .data : 0xc02ec000 - 0xc0318a00   ( 179 kB)
[06/08-14:28:35:228]       .bss : 0xc0319000 - 0xc034aac8   ( 199 kB)
[06/08-14:28:35:229]SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[06/08-14:28:35:229]NR_IRQS:246
[06/08-14:28:35:239]S3C6410 clocks: apll = 533000000, mpll = 533000000
[06/08-14:28:35:240]        epll = 24000000, arm_clk = 533000000
[06/08-14:28:35:240]VIC @f6000000: id 0x00041192, vendor 0x41
[06/08-14:28:35:250]VIC @f6010000: id 0x00041192, vendor 0x41
[06/08-14:28:35:251]sched_clock: 32 bits at 33MHz, resolution 30ns, wraps every 128929599457ns
[06/08-14:28:35:251]Console: colour dummy device 80x30
[06/08-14:28:35:261]Calibrating delay loop... 531.66 BogoMIPS (lpj=2658304)
[06/08-14:28:35:262]pid_max: default: 32768 minimum: 301
[06/08-14:28:35:273]Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[06/08-14:28:35:273]Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[06/08-14:28:35:274]CPU: Testing write buffer coherency: ok
[06/08-14:28:35:283]Setting up static identity map for 0x50214fa0 - 0x50214ffc
[06/08-14:28:35:295]VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[06/08-14:28:35:296]DMA: preallocated 256 KiB pool for atomic coherent allocations
[06/08-14:28:35:296]OK6410: Option string ok6410=0
[06/08-14:28:35:308]OK6410: selected LCD display is 480x272
[06/08-14:28:35:308]S3C6410: Initialising architecture
[06/08-14:28:35:309]bio: create slab <bio-0> at 0
[06/08-14:28:35:317]pl08xdmac dma-pl080s.0: initialized 8 virtual memcpy channels
[06/08-14:28:35:318]pl08xdmac dma-pl080s.0: initialized 16 virtual slave channels
[06/08-14:28:35:328]pl08xdmac dma-pl080s.0: DMA: PL080s rev1 at 0x75000000 irq 73
[06/08-14:28:35:329]pl08xdmac dma-pl080s.1: initialized 8 virtual memcpy channels
[06/08-14:28:35:340]pl08xdmac dma-pl080s.1: initialized 12 virtual slave channels
[06/08-14:28:35:340]pl08xdmac dma-pl080s.1: DMA: PL080s rev1 at 0x75100000 irq 74
[06/08-14:28:35:341]usbcore: registered new interface driver usbfs
[06/08-14:28:35:350]usbcore: registered new interface driver hub
[06/08-14:28:35:351]usbcore: registered new device driver usb
[06/08-14:28:35:362]Switched to clocksource samsung_clocksource_timer
[06/08-14:28:35:362]futex hash table entries: 256 (order: 0, 7168 bytes)
[06/08-14:28:35:363]ROMFS MTD (C) 2007 Red Hat, Inc.
[06/08-14:28:35:363]io scheduler noop registered
[06/08-14:28:35:373]io scheduler deadline registered
[06/08-14:28:35:373]io scheduler cfq registered (default)
[06/08-14:28:35:374]s3c-fb s3c-fb: window 0: fb 
[06/08-14:28:35:384]Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[06/08-14:28:35:385]s3c6400-uart.0: ttySAC0 at MMIO 0x7f005000 (irq = 69, base_baud = 0) is a S3C6400/10
[06/08-14:28:35:395]console [ttySAC0] enabled
[06/08-14:28:35:395]s3c6400-uart.1: ttySAC1 at MMIO 0x7f005400 (irq = 70, base_baud = 0) is a S3C6400/10
[06/08-14:28:35:406]s3c6400-uart.2: ttySAC2 at MMIO 0x7f005800 (irq = 71, base_baud = 0) is a S3C6400/10
[06/08-14:28:35:414]s3c6400-uart.3: ttySAC3 at MMIO 0x7f005c00 (irq = 72, base_baud = 0) is a S3C6400/10
[06/08-14:28:35:443]brd: module loaded
[06/08-14:28:35:462]loop: module loaded
[06/08-14:28:35:471]------------[ cut here ]------------
[06/08-14:28:35:471]WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:926 __clk_enable+0x94/0xa4()
[06/08-14:28:35:482]Modules linked in:
[06/08-14:28:35:483]CPU: 0 PID: 1 Comm: swapper Not tainted 3.14.4 #3
[06/08-14:28:35:493][<c0014238>] (unwind_backtrace) from [<c0011c74>] (show_stack+0x10/0x14)
[06/08-14:28:35:494][<c0011c74>] (show_stack) from [<c001c6ec>] (warn_slowpath_common+0x68/0x88)
[06/08-14:28:35:505][<c001c6ec>] (warn_slowpath_common) from [<c001c728>] (warn_slowpath_null+0x1c/0x24)
[06/08-14:28:35:505][<c001c728>] (warn_slowpath_null) from [<c0209ffc>] (__clk_enable+0x94/0xa4)
[06/08-14:28:35:515][<c0209ffc>] (__clk_enable) from [<c020a3a8>] (clk_enable+0x18/0x2c)
[06/08-14:28:35:526][<c020a3a8>] (clk_enable) from [<c01ab000>] (s3c2410_nand_clk_set_state+0x5c/0x64)
[06/08-14:28:35:527][<c01ab000>] (s3c2410_nand_clk_set_state) from [<c01ab5a8>] (s3c24xx_nand_probe+0x90/0x520)
[06/08-14:28:35:538][<c01ab5a8>] (s3c24xx_nand_probe) from [<c0189c78>] (platform_drv_probe+0x1c/0x4c)
[06/08-14:28:35:549][<c0189c78>] (platform_drv_probe) from [<c018873c>] (driver_probe_device+0x7c/0x200)
[06/08-14:28:35:550][<c018873c>] (driver_probe_device) from [<c018894c>] (__driver_attach+0x8c/0x90)
[06/08-14:28:35:560][<c018894c>] (__driver_attach) from [<c01871f0>] (bus_for_each_dev+0x68/0x8c)
[06/08-14:28:35:571][<c01871f0>] (bus_for_each_dev) from [<c0187964>] (bus_add_driver+0x124/0x1d4)
[06/08-14:28:35:571][<c0187964>] (bus_add_driver) from [<c0188ed4>] (driver_register+0x78/0xf8)
[06/08-14:28:35:582][<c0188ed4>] (driver_register) from [<c000878c>] (do_one_initcall+0x30/0x148)
[06/08-14:28:35:583][<c000878c>] (do_one_initcall) from [<c02ce4f8>] (kernel_init_freeable+0xe0/0x1ac)
[06/08-14:28:35:593][<c02ce4f8>] (kernel_init_freeable) from [<c0210b90>] (kernel_init+0x8/0xec)
[06/08-14:28:35:604][<c0210b90>] (kernel_init) from [<c000e838>] (ret_from_fork+0x14/0x3c)
[06/08-14:28:35:605]---[ end trace dc167f7c7b1d8ad1 ]---

[06/08-14:28:36:018]ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[06/08-14:28:36:018]ohci-s3c2410: OHCI S3C2410 driver
[06/08-14:28:36:019]s3c2410-ohci s3c2410-ohci: OHCI Host Controller
[06/08-14:28:36:031]s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
[06/08-14:28:36:032]s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000
[06/08-14:28:36:088]s3c2410-ohci s3c2410-ohci: init err (00000000 0000)
[06/08-14:28:36:089]s3c2410-ohci s3c2410-ohci: can't start
[06/08-14:28:36:099]s3c2410-ohci s3c2410-ohci: startup error -75
[06/08-14:28:36:099]s3c2410-ohci s3c2410-ohci: USB bus 1 deregistered
[06/08-14:28:36:100]s3c2410-ohci: probe of s3c2410-ohci failed with error -75
[06/08-14:28:36:109]mousedev: PS/2 mouse device common for all mice
[06/08-14:28:36:109]i2c /dev entries driver
[06/08-14:28:36:110]sdhci: Secure Digital Host Controller Interface driver
[06/08-14:28:36:119]sdhci: Copyright(c) Pierre Ossman
[06/08-14:28:36:120]s3c-sdhci s3c-sdhci.0: clock source 0: mmc_busclk.0 (133250000 Hz)
[06/08-14:28:36:128]s3c-sdhci s3c-sdhci.0: clock source 2: mmc_busclk.2 (24000000 Hz)
[06/08-14:28:36:166]mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
[06/08-14:28:36:181]s3c-sdhci s3c-sdhci.1: clock source 0: mmc_busclk.0 (133250000 Hz)
[06/08-14:28:36:181]s3c-sdhci s3c-sdhci.1: clock source 2: mmc_busclk.2 (24000000 Hz)
[06/08-14:28:36:216]mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
[06/08-14:28:36:229]usbcore: registered new interface driver usbhid
[06/08-14:28:36:229]usbhid: USB HID core driver
[06/08-14:28:36:245]drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[06/08-14:28:36:246]VFS: Cannot open root device "nfs" or unknown-block(0,255): error -6
[06/08-14:28:36:251]Please append a correct "root=" boot option; here are the available partitions:
[06/08-14:28:36:253]Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,255)
[06/08-14:28:36:263]CPU: 0 PID: 1 Comm: swapper Tainted: G        W    3.14.4 #3
[06/08-14:28:36:264][<c0014238>] (unwind_backtrace) from [<c0011c74>] (show_stack+0x10/0x14)
[06/08-14:28:36:273][<c0011c74>] (show_stack) from [<c021115c>] (panic+0x8c/0x1dc)
[06/08-14:28:36:274][<c021115c>] (panic) from [<c02cf0a4>] (mount_block_root+0x220/0x2e8)
[06/08-14:28:36:284][<c02cf0a4>] (mount_block_root) from [<c02cf330>] (prepare_namespace+0x160/0x1b8)
[06/08-14:28:36:295][<c02cf330>] (prepare_namespace) from [<c02ce580>] (kernel_init_freeable+0x168/0x1ac)
[06/08-14:28:36:295][<c02ce580>] (kernel_init_freeable) from [<c0210b90>] (kernel_init+0x8/0xec)
[06/08-14:28:36:306][<c0210b90>] (kernel_init) from [<c000e838>] (ret_from_fork+0x14/0x3c)
     上面红色部分，代表nandflash已经可以识别并可以读写，已经看到分区信息。只是会有cut here，不过这个bug不影响我们的启动，如果不想看到该打印信息，我们只需要这make menucong中配置kernel hacking中设置printk level为7，默认为4即可。
     后面我们就开始做yaffs2文件系统了，并配置内核支持yaffs2文件系统。

转载于:https://www.cnblogs.com/lixiaoming90/p/3776227.html

weixin_30914981
关注
  • 0
    点赞
  • 踩
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
cmake-3.14.4-win64-x64.zip
08-05
CMake是一款跨平台的开源构建系统，用于管理软件构建过程。它的主要目标是提供一个统一的、方便的方式来配置项目，无论这些项目是在Windows、Linux、macOS还是其他操作系统上。CMake并不直接进行编译和链接，而是...
cmake-3.14.4-Linux-x86_64.tar.gz
02-03
CMake是一款跨平台的开源构建系统，用于管理软件构建过程。它通过提供一种高级的、抽象的、平台无关的语言（即CMake语句）来编写构建脚本，这些脚本可以生成各种构建工具（如Makefile或Visual Studio项目）所需的...
S3C6410学习——Nand flash陷阱
girlkoo的专栏
10-26 8644
当系统以Nand方式启动时，硬件将Nand Flash的前8KB拷贝到Steppingstone，然后从0地址开始运行程序，在这8KB以内代码中，我们需要完成必要的硬件初始化，如果代码超过8K，我们还需要将剩余代码的搬移到链接地址处，一般在SDRAM/DDR中。其中，硬件部分需要初始化系统时钟、DDR和NAND Flash三部分。这就是S3C6410以Nand方式启动时的大致流程，看上去跟ARM9
Linux3.6.7在OK6410平台的移植（十一）LCD
qq874692826的专栏
04-01 734
本次移植大部分内容参考网上这篇文章：http://www.cnblogs.com/zuobaozhu/archive/2012/05/13/2498092.html#_Toc324535492 1.mach-ok6410.c关于LCD的部分程序: static struct s3c_fb_pd_win ok6410_lcd_type0_fb_win = { .max_bp
S3C6410嵌入式应用平台构建（四）——linux-3.14.4移植到OK6410-(初步启动)
weixin_30687587的博客
06-08 101
这次，还是把基本的基于我目前最新的Linux源码进行移植到OK6410吧，同时也写下我移植过程中遇到的问题及解决方法，不过有些方法是借鉴网上的，有些是自己加的，会有一些小bug。 一、基本工作 1. 源码下载 https://www.kernel.org/ ，最好是下载stable版本，否则会有小bug。（我现在调试的是stable版本， linux-3.14.4） ...
ok6410 移植linux-3.11.2出现如下问题？？？？
黎明之羽翼的专栏
12-01 1500
U-Boot 1.1.6 (Nov 30 2013 - 21:31:17) for SMDK6410 **************************************** ** u-boot 1.1.6 ** ** Updated for TE6410 Board ** ** Version 1.0 (10-01-
linux内核：No oob scheme defined for oobsize 512
Android/Linux的专栏
07-27 3499
U-boot在引导内核的时候居然出现了错误，如下： [    1.122956] S3C NAND Driver, (c) 2008 Samsung Electronics [    1.226821] MLC nand init failed, -19, 2012 ported by FriendlyARM http://www.arm9.net [    1.226900] S3C NA
cmake-3.14.4-Linux-x86_64.sh
02-03
cmake安装包
logging-interceptor-3.14.4.jar
12-27
logging-interceptor-3.14.4的jar包，用于okhttp网络拦截器
okhttp-3.14.4.jar
02-26
java运行依赖jar包
UBOOT-2012-10在OK6410平台的移植（三）uboot 2012.10编译配置
qq874692826的专栏
04-01 963
1.安装交叉编译器 这里选择一个比较新的版本：ARM-Linux-gcc 4.5.1 在/usr/local目录下新建一个目录arm,把4.5.1版本拷贝到这里。 然后设置环境变量：在/root/.bashrc文件最后一行添加如下内容： export PATH=$PATH:/usr/local/arm/4.5.1/bin 保存后注销系统，重新登录后可以用export命令查看是否生效：
ARM+LINUX移植攻略（十六）Linux驱动移植之LCD
helloyesyes
05-21 303
努力成为linux kernel hacker的人李万鹏原创作品，为梦而战。转载请标明出处 http://blog.csdn.net/woshixingaaa/archive/2011/05/21/6436681.aspx LCD屏驱动移植1.修改arch/arm/mach-s3c2440/mach-smdk2440.c如下程序：修改这里的时序，并把.lpcsel = ((0xCE6) &am...
嵌入式Linux驱动笔记(十三)------spi设备之RFID-rc522驱动
风筝
09-13 6481
你好！这里是风筝的博客，欢迎和我一起交流。上一节讲了spi框架：通俗易懂式分析了解spi框架 现在我们写一下spi的设备驱动程序， rc522是一款刷卡模块，类似于学校食堂的刷卡机。以kernel4.8.17为例： 之前我们给mach-smdk2440.c文件添加了： &amp;s3c_device_spi0, 现在我要把rc522设备接在2440的spi1接口上，所以我们应该修改为： &amp;s3c
微信小程序设计淘宝客导购小程序 pangolin_tbk 2.0.8安装更新一体包源代码+部署教程完美运行版.7z
08-11
经导师精心指导并认可、获 98 分的毕业设计项目！【项目资源】：微信小程序。【项目说明】：聚焦计算机相关专业毕设及实战操练，可作课程设计与期末大作业，含全部源码，能直用于毕设，经严格调试，运行有保障！【项目服务】：有任何使用上的问题，欢迎随时与博主沟通，博主会及时解答。 经导师精心指导并认可、获 98 分的毕业设计项目！【项目资源】：微信小程序。【项目说明】：聚焦计算机相关专业毕设及实战操练，可作课程设计与期末大作业，含全部源码，能直用于毕设，经严格调试，运行有保障！【项目服务】：有任何使用上的问题，欢迎随时与博主沟通，博主会及时解答。 经导师精心指导并认可、获 98 分的毕业设计项目！【项目资源】：微信小程序。【项目说明】：聚焦计算机相关专业毕设及实战操练，可作课程设计与期末大作业，含全部源码，能直用于毕设，经严格调试，运行有保障！【项目服务】：有任何使用上的问题，欢迎随时与博主沟通，博主会及时解答。 经导师精心指导并认可、获 98 分的毕业设计项目！【项目资源】：微信小程序。【项目说明】：聚焦计算机相关专业毕设及实战操练，可作课程设计与期末大作业，含全部源码，能直用于毕设，经严格调试，运行有保障！【项目服务】：有任何使用上的问题，欢迎随时与博主沟通，博主会及时解答。
光伏风电出力预测（Prediction of PV power and wind power oiutputs）+源代码+说明
08-11
<项目介绍> - python、Sk-learn、概率预测、光伏出力、风电出力 - 不懂运行，下载完可以私聊问，可远程教学 该资源内项目源码是个人的毕设，代码都测试ok，都是运行成功后才上传资源，答辩评审平均分达到96分，放心下载使用！ 1、该资源内项目代码都经过测试运行成功，功能ok的情况下才上传的，请放心下载使用！ 2、本项目适合计算机相关专业(如计科、人工智能、通信工程、自动化、电子信息等)的在校学生、老师或者企业员工下载学习，也适合小白学习进阶，当然也可作为毕设项目、课程设计、作业、项目初期立项演示等。 3、如果基础还行，也可在此代码基础上进行修改，以实现其他功能，也可用于毕设、课设、作业等。 下载后请首先打开README.md文件（如有），仅供学习参考, 切勿用于商业用途。 --------
智慧景区综合解决方案.docx
08-11
智慧景区综合解决方案.docx
mediapipe-0.8.8.1-cp37-cp37m-win_amd64.whl
08-11
mediapipe-0.8.8.1-cp37-cp37m-win_amd64.whl
Windows 微信历史版本 V3.9.6.32
最新发布
08-11
版本信息概述 版本号：V3.9.6.32 平台：Windows 类型：历史版本
odin3.14.4
09-05
Odin3.14.4是一款非常流行的三星手机刷机工具。它是由三星公司推出的一款官方Flashing软件，主要用于三星手机的固件升级和刷机操作。 Odin3.14.4具有简单易用的特点，用户只需将手机与电脑通过USB线连接，然后在...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值