服务器主板128G只显示出64G,[硬件维护]请教高手:新买的160G硬盘为什么分区后就只能显示128G?...

参考微软知识库KB305098,并对注册表进行修改!!!

Microsoft Knowledge Base Article - 305098

48-Bit LBA Support for ATAPI Disk Drives in Windows 2000

适用于

This article was previously published under Q305098

SYMPTOMS

Windows 2000 Service Pack 2 (SP2) and earlier versions of Windows 2000 do not support 48-bit Logical Block Addressing (LBA) as defined in the ATA/ATAPI 6.0 specification.

RESOLUTION

To resolve this problem, obtain the latest service pack for Windows 2000. For additional information, click the following article number to view the article in the Microsoft Knowledge Base:

260910 How to Obtain the Latest Windows 2000 Service Pack

The English-language version of this fix should have the following file attributes or later: Date Time Version Size File name

--------------------------------------------------------

10/19/2001 01:42 PM 5.0.2195.4529 86,768 Atapi.sys

04/19/2002 05:43 PM 214,938 Update.inf

The following conditions are necessary for the correct functioning of 48-bit LBA ATAPI support:

A computer with a 48-bit LBA-compatible Basic Input/Output System (BIOS) installed.

A computer with a hard disk that has a capacity of greater than 137 gigabytes (GB).

You must enable the support in the Windows registry by adding or changing the EnableBigLba registry value to 1 in the following registry subkey:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi\Parameters

To enable 48-bit LBA large-disk support in the registry:

Start Registry Editor (Regedt32.exe).

Locate and then click the following key in the registry:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Atapi\Parameters

On the Edit menu, click Add Value, and then add the following registry value:

Value name: EnableBigLba

Data type: REG_DWORD

Value data: 0x1

Quit Registry Editor.

NOTE: If you enable 48-bit LBA ATAPI support by editing the preceding registry key, but your system does not meet the minimum requirements, you may observe the following behaviors:

Operating systems that do not have 48-bit LBA support enabled by default (such as Microsoft Windows 98, Microsoft Windows Millennium Edition (Me), or Windows 2000) that are installed on a partition that spans beyond the 28-bit LBA boundary (137GB) will experience data corruption or data loss.

The installation of operating systems that do not have 48-bit LBA support enabled by default (such as Windows 98, Windows Me, or Windows 2000) on a partition that is beyond the 28-bit LBA boundary (137 GB) is unsuccessful and leaves behind a temporary installation folder.

If you install hotfixes that enable 48-bit LBA before you install Windows 2000 Service Pack 3 (SP3), the appropriate registry key will be automatically created during the installation of SP3 to preserve the data integrity of the hard disk.

After you enable 48-bit LBA support by adding the appropriate registry key, data corruption may occur if you remove the registry key or if you remove (uninstall) SP3 for Windows 2000.

If you install a copy of Windows 2000 that includes SP3 (SP3 integrated) on a large hard disk that has already been preformatted by using a 48-bit LBA-enabled operating system, the ATAPI subsystem may report hard-disk space greater than that which is addressable without the 48-bit LBA support (larger than approximately 137 GB) during the text-mode portion of Setup. In this case, the hard disk‘s partition table information has already been created. To fix the incorrect disk information, delete the partition by using either a disk partitioning utility or by deleting and then re-creating the partition during the text-mode portion of Setup. After you create the new partition, quit Setup by pressing F3, and then restart the Windows installation process. The ATAPI subsystem now correctly shows approximately 137 GB of hard disk space.

The EnableBigLba registry value is disabled:

If you have a 48-bit compatible BIOS that can support a hard disk that has a capacity of more than 137 GB, only the first 137 GB of the hard disk is addressable. The remainder of the hard disk is not used.

The operating system must be installed on the first partition that is smaller or equal to 137 GB when the EnableBigLba registry value is enabled but when you do not have a 48-bit LBA compatible BIOS.

If you enable the 48-bit LBA ATAPI support by editing the registry setting, but you lack both a 48-bit LBA compatible BIOS and a hard disk that has a capacity of more than 137 GB, the hard disk continues to function as a standard hard disk with an addressable limit of 137 GB.

The operating system must be installed on the first partition that is less than or equal to 137 GB and the rest of the hard disk divided into one or more remaining partitions when the EnableBigLba registry value is enabled on a computer without a 48-bit LBA compatible BIOS that has a hard disk with a capacity of more than 137 GB.

STATUS

Microsoft has confirmed that this is a problem in the Microsoft products that are listed at the beginning of this article. This problem was first corrected in Windows 2000 Service Pack 3.Important Although support for 48-bit LBA is included in Windows 2000 Service Pack 3 (SP3) and later, it is still necessary to create the registry change that is described in the "Resolution" section of this article.

MORE INFORMATION

For additional information about how to obtain a hotfix for Windows 2000 Datacenter Server, click the article number below to view the article in the Microsoft Knowledge Base:

265173 The Datacenter Program and Windows 2000 Datacenter Server Product

For additional information about how to install multiple hotfixes with only one reboot, click the following article number to view the article in the Microsoft Knowledge Base:

296861 How to Install Multiple Windows Updates or Hotfixes with Only One Reboot

For additional information about how to install Windows 2000 and Windows 2000 hotfixes at the same time, click the article number below to view the article in the Microsoft Knowledge Base:

249149 Installing Microsoft Windows 2000 and Windows 2000 Hotfixes

The information in this article applies to:

Microsoft Windows 2000 Professional

Microsoft Windows 2000 Server

Microsoft Windows 2000 Advanced Server

Last Reviewed: 11/13/2003 (7.0)

Keywords: kbbug kbfix kbOSWin2000fix kbWin2000sp3fix KB305098

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值