POJ 2396 Budget(有源汇上下界网络流)

最新推荐文章于 2024-11-11 20:59:17 发布

weixin_30951743

最新推荐文章于 2024-11-11 20:59:17 发布

阅读量85

点赞数

文章标签：数据结构与算法

原文链接：http://www.cnblogs.com/taozi1115402474/p/9646561.html

版权

Description

We are supposed to make a budget proposal for this multi-site competition. The budget proposal is a matrix where the rows represent different kinds of expenses and the columns represent different sites. We had a meeting about this, some time ago where we discussed the sums over different kinds of expenses and sums over different sites. There was also some talk about special constraints: someone mentioned that Computer Center would need at least 2000K Rials for food and someone from Sharif Authorities argued they wouldn't use more than 30000K Rials for T-shirts. Anyway, we are sure there was more; we will go and try to find some notes from that meeting.

And, by the way, no one really reads budget proposals anyway, so we'll just have to make sure that it sums up properly and meets all constraints.

Input

The first line of the input contains an integer N, giving the number of test cases. The next line is empty, then, test cases follow: The first line of each test case contains two integers, m and n, giving the number of rows and columns (m <= 200, n <= 20). The second line contains m integers, giving the row sums of the matrix. The third line contains n integers, giving the column sums of the matrix. The fourth line contains an integer c (c < 1000) giving the number of constraints. The next c lines contain the constraints. There is an empty line after each test case.

Each constraint consists of two integers r and q, specifying some entry (or entries) in the matrix (the upper left corner is 1 1 and 0 is interpreted as "ALL", i.e. 4 0 means all entries on the fourth row and 0 0 means the entire matrix), one element from the set {<, =, >} and one integer v, with the obvious interpretation. For instance, the constraint 1 2 > 5 means that the cell in the 1st row and 2nd column must have an entry strictly greater than 5, and the constraint 4 0 = 3 means that all elements in the fourth row should be equal to 3.

Output

For each case output a matrix of non-negative integers meeting the above constraints or the string "IMPOSSIBLE" if no legal solution exists. Put one empty line between matrices.

Sample Input

Sample Output

2 3 3 
3 3 4 

IMPOSSIBLE

题意

给你N行和和M行列，再给你一堆约束条件，问你是否存在N*M的矩阵满足条件

题解

有源汇上下界网络流经典题

这类题通常是从建完图发现源点s流出到汇点t流量，然后有些边有上下界条件

做法是把汇点连边流向源点流量为INF，让它变成一个循环流

然后就变成了无源汇上下界网络流问题，新建超级源点S，超级汇点T

令Mi=点总流入-点总流出

如果Mi>0，说明该点需要流出Mi流量，则建边S->i流量Mi

如果Mi<0，说明该点需要流入Mi流量，则建边i->T流量Mi

跑一边S->T的最大流求出一个可行流，可以得到每条边的流量，再加上下界就是答案

比如样例

2 2

0 0 > 1

0 0 < 10

建完图发现是N*M的矩阵

0 3 0

3 3 3

跑完最大流得到可行流

2 0 3

0 0 1

相加后得到答案

代码

  1 #include<stdio.h>
  2 #include<string.h>
  3 #include<algorithm>
  4 using namespace std;
  5 
  6 const int maxn=1e5+5;
  7 const int maxm=2e5+5;
  8 const int INF=0x3f3f3f3f;
  9 
 10 int TO[maxm],CAP[maxm],NEXT[maxm],tote;
 11 int FIR[maxn],gap[maxn],cur[maxn],d[maxn],q[400000];
 12 int n,m,S,T;
 13 
 14 void add(int u,int v,int cap)
 15 {
 16     //printf("i=%d u=%d v=%d cap=%d\n",tote,u,v,cap);
 17     TO[tote]=v;
 18     CAP[tote]=cap;
 19     NEXT[tote]=FIR[u];
 20     FIR[u]=tote++;
 21     
 22     TO[tote]=u;
 23     CAP[tote]=0;
 24     NEXT[tote]=FIR[v];
 25     FIR[v]=tote++;
 26 }
 27 void bfs()
 28 {
 29     memset(gap,0,sizeof gap);
 30     memset(d,0,sizeof d);
 31     ++gap[d[T]=1];
 32     for(int i=1;i<=n;++i)cur[i]=FIR[i];
 33     int head=1,tail=1;
 34     q[1]=T;
 35     while(head<=tail)
 36     {
 37         int u=q[head++];
 38         for(int v=FIR[u];v!=-1;v=NEXT[v])
 39             if(!d[TO[v]])
 40                 ++gap[d[TO[v]]=d[u]+1],q[++tail]=TO[v];
 41     }
 42 }
 43 int dfs(int u,int fl)
 44 {
 45     if(u==T)return fl;
 46     int flow=0;
 47     for(int &v=cur[u];v!=-1;v=NEXT[v])
 48         if(CAP[v]&&d[u]==d[TO[v]]+1)
 49         {
 50             int Min=dfs(TO[v],min(fl,CAP[v]));
 51             flow+=Min,fl-=Min,CAP[v]-=Min,CAP[v^1]+=Min;
 52             if(!fl)return flow;
 53         }
 54     if(!(--gap[d[u]]))d[S]=n+1;
 55     ++gap[++d[u]],cur[u]=FIR[u];
 56     return flow;
 57 }
 58 int ISAP()
 59 {
 60     bfs();
 61     int ret=0;
 62     while(d[S]<=n)ret+=dfs(S,INF);
 63     return ret;
 64 }
 65 
 66 int ca,N,M,Q,x,y,z,l[205][25],r[205][25];
 67 char op[2];
 68 
 69 void init()
 70 {
 71     tote=0;
 72     memset(FIR,-1,sizeof FIR);
 73     memset(l,0,sizeof l);
 74     memset(r,INF,sizeof r);
 75 }
 76 void update(int x,int y)
 77 {
 78     if(op[0]=='>')l[x][y]=max(l[x][y],z+1);
 79     else if(op[0]=='=')l[x][y]=max(l[x][y],z),r[x][y]=min(r[x][y],z);
 80     else if(op[0]=='<')r[x][y]=min(r[x][y],z-1);
 81 }
 82 bool build()
 83 {
 84     init();
 85     scanf("%d%d",&N,&M);
 86     int s=N+M+1,t=N+M+2;
 87     int in[250]={0},sum=0,sum1=0;
 88     add(t,s,INF);
 89     S=N+M+3,T=N+M+4,n=T;
 90     for(int i=1;i<=N;i++)
 91         scanf("%d",&x),add(s,T,x),in[i]+=x,in[s]-=x,sum+=x;
 92     for(int i=1;i<=M;i++)
 93         scanf("%d",&x),add(S,t,x),in[i+N]-=x,in[t]+=x,sum1+=x;
 94     scanf("%d",&Q);
 95     for(int i=1;i<=Q;i++)
 96     {
 97         scanf("%d%d%s%d",&x,&y,op,&z);
 98         if(!x&&!y)
 99             for(int i=1;i<=N;i++)
100                 for(int j=1;j<=M;j++)
101                     update(i,j);
102         else if(!x)
103             for(int i=1;i<=N;i++)
104                 update(i,y);
105         else if(!y)
106             for(int i=1;i<=M;i++)
107                 update(x,i);
108         else
109             update(x,y);
110     }
111     if(sum!=sum1)return 0;
112     for(int i=1;i<=N;i++)
113         for(int j=1;j<=M;j++)
114         {
115             if(l[i][j]>r[i][j])return 0;
116             add(i,j+N,r[i][j]-l[i][j]);
117             in[i]-=l[i][j];
118             in[j+N]+=l[i][j];
119         }
120     for(int i=1;i<=N+M+2;i++)
121         if(in[i]>0)
122         {
123             add(S,i,in[i]);
124             sum+=in[i];
125         }
126         else
127             add(i,T,-in[i]);
128     return sum==ISAP();
129 }
130 int main()
131 {
132     int _;
133     scanf("%d",&_);
134     for(ca=0;ca<_;ca++)
135     {
136         if(ca)printf("\n");
137         if(!build())printf("IMPOSSIBLE\n");
138         else
139         {
140             int out[205][25];
141             for(int i=1;i<=N;i++)
142                 for(int j=FIR[i];j!=-1;j=NEXT[j])
143                     if(N<TO[j]&&TO[j]<=N+M)
144                         out[i][TO[j]-N]=CAP[j^1];
145             for(int i=1;i<=N;i++)
146                 for(int j=1;j<=M;j++)
147                     printf("%d%c",out[i][j]+l[i][j],j==M?'\n':' ');
148         }
149     }
150     return 0;
151 }