kubeadm安装k8s 1.13版本

于 2019-04-10 15:56:00 发布
阅读量95 收藏
点赞数
文章标签： 运维 操作系统 开发工具
原文链接：http://www.cnblogs.com/yangxiaochu/p/10683951.html
版权

一：环境初始化

1.关闭selinux,iptables

2.做好本地的dns解析，我这里用的是/etc/hosts

3.做一下免密传输

4.

master:10.0.18.210
node1:10.0.18.211
node2:10.0.18.212

 

二：配置yum源

[root@master yum.repos.d]# vim kuberbetes.repo 

[kubernetes]

name=Kubernetes Repo

baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/

gpgcheck=1

gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg

enabled=1
[root@master yum.repos.d]# cat docker-ce.repo 
[docker-ce-stable]
name=Docker CE Stable - $basearch
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/7/$basearch/stable
enabled=1
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg

[docker-ce-stable-debuginfo]
name=Docker CE Stable - Debuginfo $basearch
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/7/debug-$basearch/stable
enabled=0
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg

[docker-ce-stable-source]
name=Docker CE Stable - Sources
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/7/source/stable
enabled=0
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg

[docker-ce-edge]
name=Docker CE Edge - $basearch
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/7/$basearch/edge
enabled=0
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg

[docker-ce-edge-debuginfo]
name=Docker CE Edge - Debuginfo $basearch
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/7/debug-$basearch/edge
enabled=0
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg

[docker-ce-edge-source]
name=Docker CE Edge - Sources
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/7/source/edge
enabled=0
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg

[docker-ce-test]
name=Docker CE Test - $basearch
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/7/$basearch/test
enabled=0
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg

[docker-ce-test-debuginfo]
name=Docker CE Test - Debuginfo $basearch
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/7/debug-$basearch/test
enabled=0
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg

[docker-ce-test-source]
name=Docker CE Test - Sources
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/7/source/test
enabled=0
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg

[docker-ce-nightly]
name=Docker CE Nightly - $basearch
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/7/$basearch/nightly
enabled=0
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg

[docker-ce-nightly-debuginfo]
name=Docker CE Nightly - Debuginfo $basearch
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/7/debug-$basearch/nightly
enabled=0
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg

[docker-ce-nightly-source]
name=Docker CE Nightly - Sources
baseurl=https://mirrors.aliyun.com/docker-ce/linux/centos/7/source/nightly
enabled=0
gpgcheck=1
gpgkey=https://mirrors.aliyun.com/docker-ce/linux/centos/gpg
[root@master yum.repos.d]# yum repolist
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
 * base: mirrors.huaweicloud.com
 * epel: mirrors.yun-idc.com
 * extras: mirrors.huaweicloud.com
 * updates: mirrors.huaweicloud.com
repo id                                           repo name                                                              status
!base/7/x86_64                                    CentOS-7 - Base                                                        10,019
!docker-ce-stable/x86_64                          Docker CE Stable - x86_64                                                  39
*!epel/x86_64                                     Extra Packages for Enterprise Linux 7 - x86_64                         13,041
!extras/7/x86_64                                  CentOS-7 - Extras                                                         385
!kubernetes                                       Kubernetes Repo                                                           336
!rsyslog_v8/7/x86_64                              Adiscon CentOS-7 - local packages for x86_64                            2,015
!updates/7/x86_64                                 CentOS-7 - Updates                                                      1,493
!zabbix/x86_64                                    Zabbix Official Repository - x86_64                                       183
!zabbix-non-supported/x86_64                      Zabbix Official Repository non-supported - x86_64                           4
repolist: 27,515

安装kubeadm kubelet kubectl docker-ce

yum -y install docker-ce kubeadm-1.13.2-0 kubectl-1.13.2-0 kubelet-1.13.2-0

将yum源文件拷贝到node1和node2上，同时在node1和node2上安装docker-ce kubeadm-1.13.2-0 kubelet-1.13.2-0

[root@master yum.repos.d]# scp kuberbetes.repo docker-ce.repo node1:/etc/yum.repos.d/
[root@master yum.repos.d]# scp kuberbetes.repo docker-ce.repo node2:/etc/yum.repos.d/

三：master初始化

1.因一些不可抗拒的因素，我们在初始化的时候会报错不能pull images ，此时需要翻墙，此处我提前下载好了需要的docker image，我们需要在初始化前把这些镜像文件导入到docker中（docker load < 文件名）:

链接：https://pan.baidu.com/s/1rkwYyeShXF05OswhweNCAw
提取码：gs0c 

 
[root@master images]# docker load < coredns.tar 
Cannot connect to the Docker daemon at unix:///var/run/docker.sock. Is the docker daemon running?
[root@master images]# systemctl start docker
[root@master images]# docker load < coredns.tar 
9198eadacc0a: Loading layer [==================================================>]  542.2kB/542.2kB
30a6f49aa944: Loading layer [==================================================>]  39.74MB/39.74MB
Loaded image: k8s.gcr.io/coredns:1.2.6
[root@master images]# docker load < etcd.tar 
f9d9e4e6e2f0: Loading layer [==================================================>]  1.378MB/1.378MB
7882cc107ed3: Loading layer [==================================================>]  195.1MB/195.1MB
43f7b6974634: Loading layer [==================================================>]  23.45MB/23.45MB
Loaded image: k8s.gcr.io/etcd:3.2.24
[root@master images]# docker load < kube-apiserver.tar 
5fe6d025ca50: Loading layer [==================================================>]  43.87MB/43.87MB
c248e3e3678b: Loading layer [==================================================>]  138.6MB/138.6MB
Loaded image: k8s.gcr.io/kube-apiserver:v1.13.2
[root@master images]# docker load < kube-controller-manager.tar 
0184d92152bd: Loading layer [==================================================>]  103.9MB/103.9MB
Loaded image: k8s.gcr.io/kube-controller-manager:v1.13.2
[root@master images]# docker load < kube-proxy.tar 
e5a609b37e16: Loading layer [==================================================>]  3.403MB/3.403MB
3155f3c58fe7: Loading layer [==================================================>]  34.84MB/34.84MB
Loaded image: k8s.gcr.io/kube-proxy:v1.13.2
[root@master images]# docker load < kube-scheduler.tar 
ee29d41ee5b0: Loading layer [==================================================>]   37.3MB/37.3MB
Loaded image: k8s.gcr.io/kube-scheduler:v1.13.2
[root@master images]# docker load < pause.tar 
e17133b79956: Loading layer [==================================================>]  744.4kB/744.4kB
Loaded image: k8s.gcr.io/pause:3.1

 


2.初始化前的准备：

[root@master ~]#systemctl start docker
[root@master ~]#systemctl enable docker
[root@master ~]#systemctl enable kubelet

我们需要关闭swap

[root@master ~]# vim /etc/sysconfig/kubelet

KUBELET_EXTRA_ARGS="--fail-swap-on=false"

 

初始化：

[root@master images]# kubeadm  init --kubernetes-version=v1.13.2 --pod-network-cidr=10.244.0.0/16 --service-cidr=10.96.0.0/12 --ignore-preflight-errors=Swap
[init] Using Kubernetes version: v1.13.2
[preflight] Running pre-flight checks
    [WARNING Service-Docker]: docker service is not enabled, please run 'systemctl enable docker.service'
    [WARNING Swap]: running with swap on is not supported. Please disable swap
    [WARNING SystemVerification]: this Docker version is not on the list of validated versions: 18.09.4. Latest validated version: 18.06
    [WARNING Service-Kubelet]: kubelet service is not enabled, please run 'systemctl enable kubelet.service'
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Activating the kubelet service
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [hd04 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 192.168.0.21
3][certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [hd04 localhost] and IPs [192.168.0.213 127.0.0.1 ::1]
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [hd04 localhost] and IPs [192.168.0.213 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 23.503218 seconds
[uploadconfig] storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config-1.13" in namespace kube-system with the configuration for the kubelets in the cluster
[patchnode] Uploading the CRI Socket information "/var/run/dockershim.sock" to the Node API object "hd04" as an annotation
[mark-control-plane] Marking the node hd04 as control-plane by adding the label "node-role.kubernetes.io/master=''"
[mark-control-plane] Marking the node hd04 as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
[bootstrap-token] Using token: 07huya.1nhbzzu3lu6j54o2
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstraptoken] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstraptoken] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstraptoken] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstraptoken] creating the "cluster-info" ConfigMap in the "kube-public" namespace
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy

Your Kubernetes master has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of machines by running the following on each node
as root:

  kubeadm join 192.168.0.210:6443 --token 4vtrh8.mepwl6gl0s1mlt3j --discovery-token-ca-cert-hash sha256:83ad166dc9a8805d827b95112f5437c1e547c95482fb92d7176ddd6f55a9cc79

其中红色部分需要在master上执行一下，黄色部分需要记录下来保存住，这是以后我们node加入k8s集群需要执行的命令

[root@master images]# mkdir -p $HOME/.kube
[root@master images]# 
[root@master images]# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@master images]# 
[root@master images]# kubectl get node
NAME   STATUS     ROLES    AGE    VERSION
hd04   NotReady   master   7m3s   v1.13.2

此处可以看出我们已经获取到了node节点，但是状态是NotReady,因为此时我们还没有安装网络，接下来我们安装flannel:

[root@master ~]# kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml

此刻马上去get node可能也是notready状态，因为此时系统还没有下载完flannel的镜像，需要稍等一下：

[root@master ~]# kubectl get node
NAME   STATUS   ROLES    AGE     VERSION
hd01   Ready    master   22h     v1.13.2

到这里我们就安装好了master,面安装node:

[root@node1 ~]#systemctl start docker
[root@node1 ~]#systemctl enable docker
[root@node1 ~]#systemctl enable kubelet
[root@node1 ~]#cat /etc/sysconfig/kubelet

  KUBELET_EXTRA_ARGS="--fail-swap-on=false"

 
[root@node1 ~]#kubeadm join 192.168.0.210:6443 --token 4vtrh8.mepwl6gl0s1mlt3j --discovery-token-ca-cert-hash sha256:83ad166dc9a8805d827b95112f5437c1e547c95482fb92d7176ddd6f55a9cc79

此时node就已经加入到集群中了，node2同样的操作

在master上：

[root@master ~]# kubectl get node
NAME   STATUS   ROLES    AGE     VERSION
hd01   Ready    master   22h     v1.13.2
hd02   Ready    <none>   5h38m   v1.13.2
hd03   Ready    <none>   4h54m   v1.13.2
[root@master ~]# kubectl get pod -n kube-system
NAME                           READY   STATUS    RESTARTS   AGE
coredns-86c58d9df4-57gcl       1/1     Running   0          5h21m
coredns-86c58d9df4-rkfzg       1/1     Running   0          5h21m
etcd-hd01                      1/1     Running   1          22h
kube-apiserver-hd01            1/1     Running   1          22h
kube-controller-manager-hd01   1/1     Running   0          22h
kube-flannel-ds-amd64-kw99x    1/1     Running   0          5h27m
kube-flannel-ds-amd64-nktsr    1/1     Running   0          4h55m
kube-flannel-ds-amd64-r442w    1/1     Running   0          5h27m
kube-proxy-5dlm5               1/1     Running   0          5h38m
kube-proxy-lnj7f               1/1     Running   0          4h55m
kube-proxy-nvc8p               1/1     Running   0          22h
kube-scheduler-hd01            1/1     Running   1          22h

 

转载于:https://www.cnblogs.com/yangxiaochu/p/10683951.html

weixin_30954265
关注
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值