fdisk分区步骤 linux,Linux下用fdisk进行分区的步骤

最新推荐文章于 2024-07-31 17:41:11 发布

走出去看看

最新推荐文章于 2024-07-31 17:41:11 发布

阅读量815

点赞数

文章标签： fdisk分区步骤 linux

本文介绍了在Linux系统中如何使用fdisk工具进行硬盘分区。通过fdisk的基本操作，如创建新分区(n)，删除分区(d)，保存改动(w)等，详细讲解了创建主分区的步骤。在示例中，成功创建了/dev/sda1主分区，并通过重新读取分区表确认了分区的创建。了解这些步骤对于Linux服务器的管理和维护至关重要。

摘要由CSDN通过智能技术生成

当你在Linux服务器上装上全新的硬盘后，你需要用类似 fdisk 这样的工具进行相应的分区。

fdisk中相应的提供5种基本操作：

o n – 创建新分区

o d – 删除一个已有的分区

o p – 打印现有的分区表

o w – 把改动写入到分区表，也就是保存.

o q – 离开 fdisk

创建新分区

在下面的例子中, 我创建了主分区 /dev/sda1

# fdisk /dev/sda

Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel Building a new DOS disklabel. Changes will remain in memory only, until you decide to write them. After that, of course, the previous content won't be recoverable. The number of cylinders for this disk is set to 34893. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with:

1) software that runs at boot time (e.g., old versions of LILO)

2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK)

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

Command (m for help): p

Disk /dev/sda: 287.0 GB, 287005343744 bytes

255 heads, 63 sectors/track, 34893 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System

Command (m for help): n

Command action

e extended

p primary partition (1-4)