usb reset失败 linux,Ubuntu下使用3G USB dongle reset问题

Ubuntu下使用3G USB dongle reset问题

发布时间:2012-12-10 08:08:54来源:红联作者:

我在UBUNTU下使用华为E160E的3G usb dongle 通过wvdial连接3G网络 连接一段时间后有时候系统会reset 3G dongle,之后就无法再连接3G网络

需要手工拨叉才能再次连网 具体log/messages信息：

Sep 26 11:26:48 alex-ThinkPad-SL410 kernel: [ 763.988116] usb 2-1: reset high speed USB device number 5 using ehci_hcd

Sep 26 11:26:48 alex-ThinkPad-SL410 kernel: [ 764.125928] option 2-1:1.3: GSM modem (1-port) converter detected

Sep 26 11:26:48 alex-ThinkPad-SL410 kernel: [ 764.126101] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0

Sep 26 11:26:48 alex-ThinkPad-SL410 kernel: [ 764.126213] option 2-1:1.2: GSM modem (1-port) converter detected

Sep 26 11:26:48 alex-ThinkPad-SL410 kernel: [ 764.126339] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1

Sep 26 11:26:48 alex-ThinkPad-SL410 kernel: [ 764.129665] option 2-1:1.1: GSM modem (1-port) converter detected

Sep 26 11:26:48 alex-ThinkPad-SL410 kernel: [ 764.129884] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2

Sep 26 11:26:48 alex-ThinkPad-SL410 kernel: [ 764.130212] option 2-1:1.0: GSM modem (1-port) converter detected

Sep 26 11:26:48 alex-ThinkPad-SL410 kernel: [ 764.130394] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3

下面是reset之后wvdial的拨号信息：

--> WvDial: Internet dialer version 1.61 Initializing modem.

--> Sending: ATZ

ATZ

OK

--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

OK

--> Sending: AT+CGDCONT=1,"IP","preconnect"

AT+CGDCONT=1,"IP","preconnect"

OK

--> Sending: AT+CSQ

AT+CSQ

+CSQ: 11,99

OK

--> Modem initialized.

--> Sending: ATDT*99#

--> Waiting for carrier.

ATDT*99#

NO CARRIER

--> No Carrier! Trying again.

--> Sending: ATDT*99#

--> Waiting for carrier.

ATDT*99#

NO CARRIER

--> No Carrier! Trying again.

--> Sending: ATDT*99#

--> Waiting for carrier.

ATDT*99#

NO CARRIER

求教各位 有没有初始化usb设备的代码？或者其他解决办法？