php查看主机端口号,linux查看本机ip和端口号的命令是什么？

linux查看本机ip的命令是“ifconfig”命令和“ip address”命令；linux查看端口号的命令是“lsof -i:port”命令和“netstat -aptn”命令。

查看本机ip：

1)ifconfig命令

输出如下：[root@topgun /home/cly]

# ifconfig

eth0: flags=4163 mtu 1500

inet 192.168.128.132 netmask 255.255.255.0 broadcast 192.168.128.255

inet6 fe80::20c:29ff:fe45:63ba prefixlen 64 scopeid 0x20

ether 00:0c:29:45:63:ba txqueuelen 1000 (Ethernet)

RX packets 1936 bytes 2440516 (2.3 MiB)

RX errors 0 dropped 0 overruns 0 frame 0

TX packets 1207 bytes 94802 (92.5 KiB)

TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

device interrupt 19 base 0x2024

lo: flags=73 mtu 16436

inet 127.0.0.1 netmask 255.0.0.0

inet6 ::1 prefixlen 128 scopeid 0x10

loop txqueuelen 0 (Local Loopback)

RX packets 12 bytes 744 (744.0 B)

RX errors 0 dropped 0 overruns 0 frame 0

TX packets 12 bytes 744 (744.0 B)

TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

该命令属于包：[root@topgun /home/cly]

# pacman -Qo ifconfig

/sbin/ifconfig 属于 net-tools 1.60.20120804git-2

2)ip address命令

输出如下：[root@topgun /home/cly]

# ip address

1: lo: mtu 16436 qdisc noqueue state UNKNOWN

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

inet 127.0.0.1/8 scope host lo

inet6 ::1/128 scope host

valid_lft forever preferred_lft forever

2: eth0: mtu 1500 qdisc pfifo_fast state UP qlen 1000

link/ether 00:0c:29:45:63:ba brd ff:ff:ff:ff:ff:ff

inet 192.168.128.132/24 brd 192.168.128.255 scope global eth0

inet6 fe80::20c:29ff:fe45:63ba/64 scope link

valid_lft forever preferred_lft forever

该命令属于包：[root@topgun /home/cly]

# pacman -Qo ip

/usr/sbin/ip 属于 iproute2 3.5.1-1

Linux查看本机端口

查看指定的端口

# lsof -i:port

查看所有端口

# netstat -aptn

安装telnet

#yum install -y telnet.x86_64

#telnet ip 端口

推荐教程： 《linux教程》