如何修改已编译的Linux程序,修改Linux内核版本(已编译多内核的情况下)

很久没上CSDN了，最近开始在做RAID测试和调优相关的工作~

对于已编译了多个内核版本的情况下，修改Linux默认启动的内核方法如下：

①编辑grub.conf文件：

vi /etc/grub.conf

②修改"default="后面的数值，改为需要启动的内核编号(下面会依次列有编译成功的每个内核版本，编号从0开始)，例如"default=0"

③最后再重启系统即可进入我们选择的内核版本。

grub.conf文件示例：

# grub.conf generated by anaconda

#

# Note that you do not have to rerun grub after making changes to this file

# NOTICE:  You have a /boot partition.  This means that

#          all kernel and initrd paths are relative to /boot/, eg.

#          root (hd0,0)

#          kernel /vmlinuz-version ro root=/dev/sda3

#          initrd /initrd-version.img

#boot=/dev/sda

default=0timeout=5splashimage=(hd0,0)/grub/splash.xpm.gzhiddenmenutitle CentOS (2.6.29.6)        root (hd0,0)        kernel /vmlinuz-2.6.29.6 ro root=LABEL=/1        initrd /initrd-2.6.29.6.imgtitle CentOS (2.6.29.6rc1)        root (hd0,0)        kernel /vmlinuz-2.6.29.6rc1 ro root=LABEL=/1        initrd /initrd-2.6.29.6rc1.imgtitle CentOS (2.6.32.27)        root (hd0,0)        kernel /vmlinuz-2.6.32.27 ro root=LABEL=/1        initrd /initrd-2.6.32.27.imgtitle CentOS (2.6.test)        root (hd0,0)        kernel /vmlinuz-2.6.29testtest ro root=LABEL=/1        initrd /initrd-2.6.29testtest.imgtitle CentOS (2.6.34.7)        root (hd0,0)        kernel /vmlinuz-2.6.34.7 ro root=LABEL=/1        initrd /initrd-2.6.34.7.imgtitle CentOS (2.6.35.9)        root (hd0,0)        kernel /vmlinuz-2.6.35.9 ro root=LABEL=/1        initrd /initrd-2.6.35.9.imgtitle CentOS (2.6.36.4)        root (hd0,0)        kernel /vmlinuz-2.6.36.4 ro root=LABEL=/1        initrd /initrd-2.6.36.4.imgtitle CentOS (2.6.38.8)        root (hd0,0)        kernel /vmlinuz-2.6.38.8 ro root=LABEL=/1        initrd /initrd-2.6.38.8.imgtitle CentOS (2.6.18-238.el5)        root (hd0,0)        kernel /vmlinuz-2.6.18-238.el5 ro root=LABEL=/1        initrd /initrd-2.6.18-238.el5.img