ccs matlab联调,MATLAB与CCS联调中idelink_ert_tlc和ert_tlc选择

同问。希望高工给解释一下。我在用idelink_ert_tlc的时候就能通过2014B给DSP直接下载程序。但是用ert_tlc就不行，提示文件路径不对。问题描述如下，请高工帮忙解决一下，谢谢！

### Generating code into build folder: D:\MATLAB\Cache\MATLAB\simulink_SCI_DSP_Target_test_ert_rtw

### Invoking Target Language Compiler on simulink_SCI_DSP_Target_test.rtw

### Using System Target File: D:\MATLAB\2014B\rtw\c\ert\ert.tlc

### Loading TLC function libraries

Warning:  The data type "int8" uses a word size that is not available on the intended target.

Fixed-point signals using this data type will be put inside a larger word or multi words.  When used,

extra software will be generated to force this larger word or multi words to emulate a smaller

word.  This emulation is helpful when your prototype target and your final

production target are not the same.  If the smaller word size does NOT exist

on the final production target, then consider increasing the word size to

one that is supported.

Warning:  The data type "uint8" uses a word size that is not available on the intended target.

Warning:  The data type "boolean" uses a word size that is not available on the intended target.

### Initial pass through model to cache user defined code

### Caching model source code

### Writing header file DSP28xx_SciUtil.h

### Writing source file DSP28xx_SciUtil.c

### Writing header file simulink_SCI_DSP_Target_test.h

### Writing header file simulink_SCI_DSP_Target_test_types.h

### Writing header file rtwtypes.h

### Writing source file simulink_SCI_DSP_Target_test.c

### Writing header file simulink_SCI_DSP_Target_test_private.h

### Writing source file simulink_SCI_DSP_Target_test_data.c

### Writing header file rtmodel.h

### Writing source file ert_main.c

### TLC code generation complete.

### Evaluating PostCodeGenCommand specified in the model

### Using toolchain: Texas Instruments C2000 Code Generation Tools v5.2.12 | gmake (64-bit Windows)

### Creating 'D:\MATLAB\Cache\MATLAB\simulink_SCI_DSP_Target_test_ert_rtw\simulink_SCI_DSP_Target_test.mk' ...

### Using toolchain: Texas Instruments C2000 Code Generation Tools v5.2.12 | gmake (64-bit Windows)

### Creating 'D:\MATLAB\Cache\MATLAB\simulink_SCI_DSP_Target_test_ert_rtw\simulink_SCI_DSP_Target_test.mk' ...

### Building 'simulink_SCI_DSP_Target_test': D:\MATLAB\2014B\bin\win64\gmake -B -f simulink_SCI_DSP_Target_test.mk all

D:\MATLAB\Cache\MATLAB\simulink_SCI_DSP_Target_test_ert_rtw>cd .

D:\MATLAB\Cache\MATLAB\simulink_SCI_DSP_Target_test_ert_rtw>if "" == "" (D:\MATLAB\2014B\bin\win64\gmake -B -f simulink_SCI_DSP_Target_test.mk all )  else (D:\MATLAB\2014B\bin\win64\gmake -B -f simulink_SCI_DSP_Target_test.mk  )

/bin/cl2000 --compile_only --large_memory_model --cla_support=cla0 --silicon_version=28 --define="LARGE_MODEL" -i"/~SupportFiles/DSP280x_headers" -i"/~SupportFiles/DSP280x_headers/include" -i"/include" -v28 -ml -DMODEL=simulink_SCI_DSP_Target_test -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DONESTEPFCN=1 -DTERMFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DRT -DSTACK_SIZE=64 -DONESTEPFCN=1 -DTERMFCN=1 -DMAT_FILE=0 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DTID01EQ=0 -DRT -DSTACK_SIZE=64 -DMODEL=simulink_SCI_DSP_Target_test -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -ID:/MATLAB/Cache/MATLAB/simulink_SCI_DSP_Target_test_ert_rtw -ID:/MATLAB/Cache/MATLAB -ID:/MATLAB/2014B/extern/include -ID:/MATLAB/2014B/simulink/include -ID:/MATLAB/2014B/rtw/c/src -ID:/MATLAB/2014B/rtw/c/src/ext_mode/common -ID:/MATLAB/2014B/rtw/c/ert -ID:/MATLAB/SupportPackages/R2014b/texasinstrumentsc2000/toolbox/target/supportpackages/tic2000/@slCustomizer/../src -ID:/MATLAB/2014B/toolbox/target/extensions/processor/tic2000/include -ID:/MATLAB/2014B/toolbox/rtw/targets/common/can/blocks/tlc_c -ID:/MATLAB/SupportPackages/R2014b/texasinstrumentsc2000/toolbox/target/supportpackages/tic2000/@slCustomizer/../inc -IC:/ti/controlSUITE/device_support/f2803x/v125/DSP2803x_common/include -IC:/ti/controlSUITE/device_support/f2803x/v125/DSP2803x_headers/include -ID:/MATLAB/2014B/toolbox/shared/can/src/scanutil -ID:/MATLAB/2014B/toolbox/target/extensions/processor/tic2000/blks/lct/include --output_file="MW_c28xx_board.obj" "D:/MATLAB/Cache/MATLAB/simulink_SCI_DSP_Target_test_ert_rtw/MW_c28xx_board.c"

系统找不到指定的路径。

gmake: *** [MW_c28xx_board.obj] Error 1

D:\MATLAB\Cache\MATLAB\simulink_SCI_DSP_Target_test_ert_rtw>echo The make command returned an error of 2

The make command returned an error of 2

D:\MATLAB\Cache\MATLAB\simulink_SCI_DSP_Target_test_ert_rtw>An_error_occurred_during_the_call_to_make

'An_error_occurred_during_the_call_to_make' 不是内部或外部命令，也不是可运行的程序

或批处理文件。