串口ping不通修改服务器,怪事，ping不通服务器但我串口一接马上就好了？

怪事，ping不通服务器但我串口一接马上就好了？

(2011-12-24 03:24:01)

标签：

服务器

杂谈

怪事，ping不通服务器但我串口一接马上就好了？连串口，过几秒，大概3-5秒吧 (正常的话好像比这短点时间)

c)ontinue, s)ync, r)eset? c

root@brewfile1 #

马上对方就ping的通我的服务器了 晕菜 大家有什么好思路吗:shock:

这么神奇......检查下你的/etc/default/kbd吧：韩国雪花秀

# Uncomment the following line to disable keyboard or serial

device

# abort sequences:

#KEYBOARD_ABORT=disable

# Uncomment the following line to enable a non-BREAK

alternate

# serial input device abort sequence:

#KEYBOARD_ABORT=alternate

要不就是被人家发送了一个break信号，要不就是一个非break的串口拔插等信号导致机器要退到OK模式，反正我这边的机器都是将这两个disable。你这样的情况其实相当于stop

+ a到了OK，continue相当于按了go又go回系统了。这个真没遇到过To Shut Down the Server

Module Using the Break Key or the Equivalent Pair of ILOM

Commands

When it is impossible or impractical to shut down the system

gracefully, you can get to the ok prompt, if you have an

alphanumeric terminal attached to the server module, by pressing

the Break key.

The equivalent method uses the following pair of commands:

1. Type set /HOST send_break_action=break

This command forces a running server module to drop to a menu. For

example:

-> set /HOST send_break_action=break

Set ’send_break_action’ to ’break’

-> start /SP/console

Are you sure you want to start /SP/console (y/n)? y

Serial console started.To stop, type #.

2. Press Enter.

The server module responds with:

参考AS400学习线路图自我学习方法(推荐新人)/>c)ontinue, s)ync,

r)eset

3. Select r to reset the system and stop at the ok prompt if the

auto-boot? option is set to false.

Selecting c returns you to the Solaris prompt without reset.

Selecting s causes a core dump, a hard reset of the control domain

(the host if no guest domains have been configured), then boots the

Solaris

OShttp://www.sun.com/bigadmin/features/articles/console_sparc_cmt.jsp原帖由

zhmzhouming 于 2009-9-11 09:25 发表

http://bbs2.chinaunix.net/images/common/back.gif

检查下你http://www.lushen.net的/etc/default/kbd吧：

# Uncomment the following line to disable keyboard or serial

device

# abort sequences:

#KEYBOARD_ABORT=disable

# Uncomment the following line to enable a non- ...

肯定不是在ok那 在ok的话 不可能瞬间到系统的

而且这批刀片有N片 系统都是批量安装的，就这片出这鸡毛问题 太诡异了

[ 本帖最后由 yuhuohu 于 2009-9-15 01:47 编辑 ]谢谢各位的热心

问题无解中关注应该是被发送了ctrl+break指令了，所以用户串口登陆才会出现c)ontinue, s)ync,

r)eset这个提示

分享：

喜欢

0

赠金笔

加载中，请稍候......

评论加载中，请稍候...

发评论

登录名： 密码： 找回密码 注册记住登录状态

昵   称：

评论并转载此博文

发评论

以上网友发言只代表其个人观点，不代表新浪网的观点或立场。