linux安装sz工具,为我们的Linux(centOS)服务器安装rz 与 sz 工具

时间：2015-11-16 ┊

阅读：3,259 次 ┊

标签: 分享 , 系统 , 配置

经常管理linux服务器的童鞋可能都会经常用到rz和sz命令

大家都知道rz/sz在上传或下载文件时非常的实用

不过，经常拿到个新的服务器，却提示无法找到？

这是因为它们不是linux自带工具，需要我们后期自己安装。

RZ：Receive files with ZMODEM/YMODEM/XMODEM protocol

SZ：Send file(s) with ZMODEM/YMODEM/XMODEM protocol

首先用下面命令从远程下载lrzsz安装包，wget都懂的：

wget http://www.ohse.de/uwe/releases/lrzsz-0.12.20.tar.gz

然后解压并转到安装包目录：

tar zxvf lrzsz-0.12.20.tar.gz && cd lrzsz-0.12.20

make 安装：

./configure && make && make install

转到bin目录：

cd /usr/bin

连接rz到lrz：

ln -s /usr/local/bin/lrz rz

连接sz到lsz：

ln -s /usr/local/bin/lsz sz

lrzsz扩展信息：

rz version 0.12.20

Usage: rz [options] [filename.if.xmodem]

Receive files with ZMODEM/YMODEM/XMODEM protocol

(X) = option applies to XMODEM only

(Y) = option applies to YMODEM only

(Z) = option applies to ZMODEM only

-+, --append append to existing files

-a, --ascii ASCII transfer (change CR/LF to LF)

-b, --binary binary transfer

-B, --bufsize N buffer N bytes (N==auto: buffer whole file)

-c, --with-crc Use 16 bit CRC (X)

-C, --allow-remote-commands allow execution of remote commands (Z)

-D, --null write all received data to /dev/null

--delay-startup N sleep N seconds before doing anything

-e, --escape Escape control characters (Z)

-E, --rename rename any files already existing

--errors N generate CRC error every N bytes (debugging)

-h, --help Help, print this usage message

-m, --min-bps N stop transmission if BPS below N

-M, --min-bps-time N for at least N seconds (default: 120)

-O, --disable-timeouts disable timeout code, wait forever for data

--o-sync open output file(s) in synchronous write mode

-p, --protect protect existing files

-q, --quiet quiet, no progress reports

-r, --resume try to resume interrupted file transfer (Z)

-R, --restricted restricted, more secure mode

-s, --stop-at {HH:MM|+N} stop transmission at HH:MM or in N seconds

-S, --timesync request remote time (twice: set local time)

--syslog[=off] turn syslog on or off, if possible

-t, --timeout N set timeout to N tenths of a second

-u, --keep-uppercase keep upper case filenames

-U, --unrestrict disable restricted mode (if allowed to)

-v, --verbose be verbose, provide debugging information

-w, --windowsize N Window is N bytes (Z)

-X --xmodem use XMODEM protocol

-y, --overwrite Yes, clobber existing file if any

--ymodem use YMODEM protocol

-Z, --zmodem use ZMODEM protocol

short options use the same arguments as the long ones

sz version 0.12.20

Usage: sz [options] file ...

or: sz [options] -{c|i} COMMAND

Send file(s) with ZMODEM/YMODEM/XMODEM protocol

(X) = option applies to XMODEM only

(Y) = option applies to YMODEM only

(Z) = option applies to ZMODEM only

-+, --append append to existing destination file (Z)

-2, --twostop use 2 stop bits

-4, --try-4k go up to 4K blocksize

--start-4k start with 4K blocksize (doesn't try 8)

-8, --try-8k go up to 8K blocksize

--start-8k start with 8K blocksize

-a, --ascii ASCII transfer (change CR/LF to LF)

-b, --binary binary transfer

-B, --bufsize N buffer N bytes (N==auto: buffer whole file)

-c, --command COMMAND execute remote command COMMAND (Z)

-C, --command-tries N try N times to execute a command (Z)

-d, --dot-to-slash change '.' to '/' in pathnames (Y/Z)

--delay-startup N sleep N seconds before doing anything

-e, --escape escape all control characters (Z)

-E, --rename force receiver to rename files it already has

-f, --full-path send full pathname (Y/Z)

-i, --immediate-command CMD send remote CMD, return immediately (Z)

-h, --help print this usage message

-k, --1k send 1024 byte packets (X)

-L, --packetlen N limit subpacket length to N bytes (Z)

-l, --framelen N limit frame length to N bytes (l>=L) (Z)

-m, --min-bps N stop transmission if BPS below N

-M, --min-bps-time N for at least N seconds (default: 120)

-n, --newer send file if source newer (Z)

-N, --newer-or-longer send file if source newer or longer (Z)

-o, --16-bit-crc use 16 bit CRC instead of 32 bit CRC (Z)

-O, --disable-timeouts disable timeout code, wait forever

-p, --protect protect existing destination file (Z)

-r, --resume resume interrupted file transfer (Z)

-R, --restricted restricted, more secure mode

-q, --quiet quiet (no progress reports)

-s, --stop-at {HH:MM|+N} stop transmission at HH:MM or in N seconds

--tcp build a TCP connection to transmit files

--tcp-server open socket, wait for connection

-u, --unlink unlink file after transmission

-U, --unrestrict turn off restricted mode (if allowed to)

-v, --verbose be verbose, provide debugging information

-w, --windowsize N Window is N bytes (Z)

-X, --xmodem use XMODEM protocol

-y, --overwrite overwrite existing files

-Y, --overwrite-or-skip overwrite existing files, else skip

--ymodem use YMODEM protocol

-Z, --zmodem use ZMODEM protocol

short options use the same arguments as the long ones