linux自动挂载fcoe存储,刀箱服务器上部署集群模式CloudOS挂载FCoE存储方法

1.通过iLO口检查，发现Boot to FCoE Target一项是enable的：

3.检查刀箱VC配置，确认该CloudOS节点的FCoE HBA卡的MAC地址：

4.进到该节点后台，用ip addr命令检查各网卡的MAC地址，找出哪几张的MAC地址与FCoE HBA卡的MAC地址相同(本案例中VC的截图和ip addr的截图分别是在不同节点上做的，如果是在同一节点上做的话会有两个网卡的MAC地址与FCoE HBA卡完全相同)：

5.按如下步骤配置HBA卡：

[root@localhost ~]#yum install fcoe-utils

[root@localhost ~]#systemctl enable lldpad.service

[root@localhost ~]#systemctl enable fcoe.service

[root@localhost ~]#reboot

[root@localhost ~]#cd /etc/fcoe

[root@localhost fcoe]#ls

cfg-ethx

[root@localhost fcoe]#cp cfg-ethx cfg-eno51  //eno51、52是两张HBA卡的名称

[root@localhost fcoe]#cp cfg-ethx cfg-eno52

//以cfg-ethx为模版，创建FCoE配置文件与LOM1:1-b(eno51)、LOM1:1-b(eno52)

[root@localhost fcoe]#vi cfg-eno51

//DCB_REQUIRED="no"

[root@localhost fcoe]#vi cfg-eno52

//DCB_REQUIRED="no"

[root@localhost fcoe]#vi /etc/sysconfig/network-scripts/ifcfg-eno49

//OnBOOT=yes

[root@localhost fcoe]#vi /etc/sysconfig/network-scripts/ifcfg-eno50

//OnBOOT=yes

[root@localhost fcoe]#vi /etc/sysconfig/network-scripts/ifcfg-eno51

//BOOTPROTO=none

//OnBOOT=yes

[root@localhost fcoe]#vi /etc/sysconfig/network-scripts/ifcfg-eno52

//BOOTPROTO=none

//OnBOOT=yes

[root@localhost fcoe]#ifup eno51

[root@localhost fcoe]#ifup eno52

[root@localhost fcoe]#lldptool set-lldp -i eno49 adminStatus=disabled

adminStatus = disabled

[root@localhost fcoe]#lldptool set-lldp -i eno50 adminStatus=disabled

adminStatus = disabled

[root@localhost fcoe]#lldptool set-lldp -i eno51 adminStatus=disabled

adminStatus = disabled

[root@localhost fcoe]#lldptool set-lldp -i eno52 adminStatus=disabled

adminStatus = disabled

[root@localhost fcoe]#more /var/lib/lldpad/lldpad.conf

/var/lib/lldpad/lldpad.conf

//确认lldpad.conf生成，并且所有网卡(eno49、eno51…)，adminStatus = 0;

[root@localhost fcoe]#systemctl restart lldpad

[root@localhost fcoe]#systemctl restartfcoe

[root@localhost fcoe]#fcoeadm -i

Description:BCM57840 NetXtreme II 10/20-Gigabit Ethernet

Revision:11

Manufacturer:Broadcom Corporation

Serial Number:5820B1E7C400

Driver:bnx2x 1.710.51-0

Number of Ports:1

Symbolic Name:bnx2fc (QLogic BCM57840) v2.4.2 over eno51

OS Device Name:host1

Node Name:0x20005820B1E7C401

Port Name:0x10005820B1E7C401

FabricName:0x100000051EFAE728

Speed:Unknown

Supported Speed:1 Gbit, 10 Gbit

MaxFrameSize:2048

FC-ID (Port ID):0x04133B

State:Online

6.进到/sys/class/目录下，发现已经生成了fc_host目录，接下来继续开局指导的挂载流程即可。