h3c无线认证服务器,H3C无线路由器配置样例之无认证接入

#配置WLAN服务模板为clear模式，不配置认证方式。

AP] wlan service-template 1 clear

[AP-wlan-st-1] ssid service

[AP-wlan-st-1] authentication-method open-system

[AP-wlan-st-1] service-template enable[AP-wlan-st-1] quit

6、在wlan-radio2/0上绑定无线服务模板1和wlan-bss0

[AP] interface wlan-radio 2/0

[AP-WLAN-Radio2/0] radio-type dot11g

[AP-WLAN-Radio12/0] channel 1[AP-WLAN-Radio2/0] service-template 1 interface wlan-bss 0

到此配置完毕。

检查结果：

[Navigator]dis wlan client

Total Number of Clients           : 1

Total Number of Clients Connected : 1

Client Information

-------------------------------------------------------------------------------

MAC Address        BSSID              AID    State           PS Mode  QoS Mode

-------------------------------------------------------------------------------

0013-cea9-9691     000f-e2bf-6b60     1      Running         Active   WMM

-------------------------------------------------------------------------------