不是这个问题,试过这样绑定,一样的错误
[root@localhost dpdk-2.0.0]# ./tools/dpdk_nic_bind.py --bind=igb_uio eth8 eth10
Error: bind failed for 0000:02:08.0 - Cannot bind to driver igb_uio
Error: unbind failed for 0000:02:08.0 - Cannot open /sys/bus/pci/drivers//unbind
这是dmesg打印
igb_uio 0000:02:08.0: PCI INT A disabled
igb_uio: probe of 0000:02:08.0 failed with error -16
igb_uio 0000:02:08.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
igb_uio 0000:02:08.0: setting latency timer to 64
igb_uio 0000:02:08.0: PCI INTX mask not supported
IRQ handler type mismatch for IRQ 0
current handler: timer
Pid: 3713, comm: dpdk_nic_bind.p Not tainted 2.6.32-504.el6.x86_64 #1
Call Trace:
[] ? __setup_irq+0x382/0x3c0
[] ? uio_interrupt+0x0/0x48 [uio]
[] ? request_threaded_irq+0x133/0x230
[] ? __uio_register_device+0x553/0x610 [uio]
[] ? igbuio_pci_probe+0x3a7/0x4a0 [igb_uio]
[] ? kobject_get+0x1a/0x30
[] ? local_pci_probe+0x17/0x20
[] ? pci_device_probe+0x101/0x120
[] ? driver_sysfs_add+0x62/0x90
[] ? driver_probe_device+0x9c/0x3e0
[] ? driver_bind+0xca/0x110
[] ? drv_attr_store+0x2c/0x30
[] ? sysfs_write_file+0xe5/0x170
[] ? vfs_write+0xb8/0x1a0
[] ? sys_write+0x51/0x90
[] ? system_call_fastpath+0x16/0x1b
igb_uio 0000:02:08.0: PCI INT A disabled
igb_uio: probe of 0000:02:08.0 failed with error -16
看看有没有新意见!