一、编辑网卡文件
vi /etc/network/interfaces
二、修改网卡文件
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
auto eth0
iface eth0 inet6 static
address 2001:da8:203:ec8:a00:27ff:fe6b:7ed
netmask 64
gateway 2001:da8::1
iface eth0 inet static
address 192.168.1.193
netmask 255.255.255.0
gateway 192.168.1.1
三、添加IPV6路由
route -A inet6 add default gw 2001:da8:203:ec8::1 dev eth0
#接口启用时添加一条路由
# up route -A inet6 add default gw 2001:da8:203:ec8::1 dev eth0
#接口不可用时删除一条路由
#down route -A inet6 add default gw 2001:da8:203:ec8::1 dev eth0
#添加静态路由包含下一跳
#格式为 route -A inet6 add 网关