信号灯c语言程序,交通信号灯C语言源程序.pdf

#include "reg51.h"

#include "absacc.h"

sbit SN_LED_RED=P1^3;

sbit SN_LED_GREEN=P1^5;

sbit SN_LED_YELLOW=P1^4;

sbit EW_LED_RED=P1^0;

sbit EW_LED_GREEN=P1^2;

sbit EW_LED_YELLOW=P1^1;

unsigned char code disptab[] = {0xC0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8,0x80,

0x90,0x88,0x83,0xC6,0xA1,0x86,0x8E,0xFF};

unsigned char code bittab[] = {0xFE,0xFD,0xFB,0xF7,0xEF,0xDF,0xBF,0x7F};

unsigned char num=0; // 数码管序号

unsigned char led[] = {0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};

char set_value[4] = {60,4,40,4}; // 设置数码管在显示值

unsigned char sign[4]={1,0,0,0};

unsigned char disp_ew,disp_sn;

unsigned char falsh_sign,direction_sign,flash_count;

unsigned int secnum;

unsigned char key;

void delay_ms(unsigned int a);

void add_process();

void sub_process();

void set_process();

void scan_key();

void init();

void delay_ms(unsigned int a)

{unsigned char i;

while(a--)

{i=70;

while(i--);

}

}

void add_process()

{

delay_ms(600);

if(!P3^2)

{

delay_ms(500);

if(P3^2)

{

if(key == 1)

{

set_value[0] = set_value[0] + 10;

if(set_value[0] > 99)

{

set_value[0] = set_value[0] % 10;

}

disp_ew = set_value[0];

}

if(key == 2)

{

set_value[1]++;

if(set_value[1] > 9)

{

set_value[1] = 0;

}

disp_ew = set_value[1];

}

if(key == 3)

{

set_value[2] = set_value[2] + 10;

if(set_value[2] > 99)

{

set_value[2] = set_value[2] % 10;

}

disp_sn = set_value[2];

}

if(key == 4)

{

set_value[3]++;

if(set_value