4418linux内核源码,s5p4418 Android Linux内核 自定义IO访问方法

#include

typedef struct

{

volatile unsigned int UARTDR;///< 0x00: Output Register

volatile unsigned int UARTRSR;///< 0x04: Output Enable Register

volatile unsigned int reserve[5];

volatile unsigned int UARTFR;///< 0x08: Event Detect Mode Register

volatile unsigned int UARTILPR;///< 0x10: Interrupt Enable Register

volatile unsigned int UARTIBRD;///< 0x14: Event Detect Register

volatile unsigned int UARTLCR_H;///< 0x18: PAD Status Register

volatile unsigned int UARTCR;///< 0x1C: Pull Up Enable Register

volatile unsigned int UARTIFLS;///< 0x20: Alternate Function Select Register

volatile unsigned int UARTIMSC; ///< 0x28 : Event Detect Mode extended Register

}NX_UART_RegisterSet;

#define Write_IO(Addr,Data) (*(volatile unsigned int*)Addr)=((unsigned int)Data)

#define UART_GPIO_BASEADDR 0xC00A0000//PHY_BASEADDR_GPIOB

#define UART_GPIO_NUM 24

void uart_rts_cts_set()

{

register unsigned int newvalue;

//unsigned int addr;

//addr = ioremap(WIFI_GPIO_BASEADDR, sizeof(NX_GPIO_RegisterSet));

NX_UART_RegisterSet *uart_gpio = (NX_UART_RegisterSet *)ioremap(UART_GPIO_BASEADDR, sizeof(NX_UART_RegisterSet));

/*pr_debug("wifi_gpio is:%x\n", wifi_gpio);

pr_debug("GPIOxOUT is:%x\n", &wifi_gpio->GPIOxOUT);

pr_debug("GPIOxOUTENB is:%x\n", &wifi_gpio->GPIOxOUTENB);

pr_debug("val is:%x\n", val);*/

newvalue = uart_gpio->UARTCR;

newvalue &=~(0xc0);

newvalue |=(unsigned int)0xc0 ;

uart_gpio->UARTCR = newvalue;

//pr_debug("GPIOxOUTENB is:%x\n", wifi_gpio->GPIOxOUTENB);

//mdelay(10);

//mdelay(10);

//pr_debug("GPIOxOUT is:%x\n", wifi_gpio->GPIOxOUT);

}