基于扩频通信matlab,基于MATLAB的扩频通信系统仿真研究毕业论文

内容介绍

原文档由会员 emplate 发布

约四千三百余字

摘要　本文阐述了扩展频谱通信技术的理论基础和实现方法，利用MATLAB提供的可视化工具Simulink建立了扩频通信系统仿真模型，详细讲述了各模块的设计，并指出了仿真建模中要注意的问题。在给定仿真条件下，运行了仿真程序，得到了预期的仿真结果。同时，利用建立的仿真系统，研究了扩频增益与输出端信噪比的关系，结果表明，在相同误码率下，增大扩频增益，可以提高系统输出端的信噪比，从而提高通信系统的抗干扰能力。

关键词　扩频通信,　信噪比， 误码率，　扩频增益

Simulation of the Spread Spectrum Communication System

Based on MATLAB

Abstract: The theory base and realizing methods of the spread spectrum communication technology was presented in this study. The simulation model of the spread spectrum communication system was built by using SIMULINK, which is provided by MATLAB. In addition, each module of the simulation model was introduced in detail，and pointed out the problems that must be pay attention to in the system simulation. On the basis of the designed simulation conditions, the simulation program was run and the anticipant results were gained. Moreover, the relationship between the spread spectrum gain and the fan-out error rate was also studied by use of the simulation system. The results showed that on the base of the same error rate, if the spread spectrum gain was enlarged, the Signal-to-Noise of the system fan-out would be enhanced and the anti-jamming capability of the communication system would also be enhanced.

Keywords: spread spectrum communication, Signal-to-Noise, error rate, spread spectrum gain

参考文献：

1 曾兴雯，刘乃安，孙献璞。扩展频谱通信及其多址技术［M］。西安：西安电子科技大学出版社，2004。

2 徐明远，邵玉斌。MATLAB仿真在通信与电子工程中的应用[M]。西安：西安电子科技大学出版社，2005。

3 李建新，刘乃安，刘继平。现代通信系统分析与仿真－MATALAB通信工具箱［M］。西安：西安电子科技大学出版社，2001。

4 徐明伟，李茜，汤伟。基于MATLAB串口通信的数据采集系统的设计。微计算机信息，2005，21(8-1)，89-90。

5 郭海燕，毕红军。MATLAB在伪随机码的生成及仿真中的应用。计算机仿真，21(3)，2004.3。