台式计算机序列号在哪,台式电脑序列号在主机上的位置

Evo DesktopsEvo D500 CMTBack near the pci slots and also on Top of unit or the left side6X19JYFZM9PGEvo D500 DTOn the back near fan and also on Top of unit right front corner6X1AJYGZA999Evo D500 SFF 815eOn top of unit right front corner6Y19JYHZ7999Evo D500 SFF 845On top of unit right front corner6Y19JYHZ7999Evo D500 Ultra SlimRight side panel and On top of unit right front corner6X21KL72Y99VEvo D300On the back and also On top of unit right front cornerU202KGLZB999Evo D300V Celeron & Pentium IIIOn top of unit right front corner7P22KHHB999JEvo D300V Pentium IVOn top of unit right front corner7P22KHL8999RiPAQ DesktopsiPAQ 2.0On the back of the system at the top in the center6X17JDVZV1JZiPAQ 1.xOn the back of the system6029DZG3A999Deskpro FamilyDeskpro EN Desktops and MinitowersOn top of unit right front corner and on the back near the power supply fan6027DM92A123Deskpro EN SFFOn top of unit right front corner6106FHGZG999Deskpro EN CMTOn top of unit right front corner (DT) or on the left side panel (MT) and on the back of the system

6025DYSZC999

Deskpro EN SDTOn top of unit right front corner6025DYSZC123Deskpro EP/SBOn top of unit right front corner (DT) or on the left side panel (MT) and on the back of the system68023Z62J123Deskpro 2000On the right side of the system and on the back6727BSFZP999Deskpro 4000On the right side of the system and on the back6628BBF5P999Deskpro 6000On the right side of the system and on the back6704BMQ3D999Deskpro 4000NOn the right side of the system and on the back6735BQZ3P999Deskpro 4000SOn the right side of the system and on the back3732BPD3P999Deskpro DT/MT PCIOn the back of the system6606HXD3P999Deskpro EX/EX-SOn top of unit right front corner6035FR4ZD999Deskpro /iOn the back of the system6636ABC1K999Deskpro /MOn the back of the system6636ABC1K999Deskpro /XEOn the back of the system6636ABC1K999Deskpro /XLOn the right side of the system near the front of the system at the bottom6616HWP8D146ProSignia Desktops

ProSignia 310

On top of unit right front corner (DT) or on the left side panel (MT) and on the back of the system3914CH526999

ProSignia 320

On the back of the system near the power supply fan1K95CVWP7999

ProSignia 330

On top of unit right front corner (DT) or on the left side panel (MT) and on the back of the system3914CH526999

ProSignia 340

On the back of the system near the power supply fan1K95CVWP7999Prolinea Desktops

ProLinea /E /DT /MT

On the back of the system6334HEV1K999

ProLinea DT/MT PCI

On the back of the system6334HLD5K999

ProLinea NET1, Enhanced, MT, and Classic

On the back of the system6334HEV1K999

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
在上述函数的基础上,我们可以增加处理消息类型和序列号的代码,如下所示: ``` static_always_inline void gtpu_echo_request (vlib_main_t * vm, vlib_node_runtime_t * node, gtpu_header_t * gtpu, u32 sw_if_index0) { vnet_main_t *vnm = vnet_get_main (); vnet_sw_interface_t *si = vnet_get_sw_interface (vnm, sw_if_index0); /* Set MTU of the tunnel interface. This is an estimate since we do not know how many labels the packet will have, but it is better than nothing. */ gtpu4_tunnel_t *t = gtpu4_tunnel_from_gtpu_header (gtpu); u32 mtu = si->mtu_bytes - sizeof (ip4_header_t) - sizeof (udp_header_t) - sizeof (gtpu_header_t); t->mtu = clib_min (t->mtu, mtu); /* Just swap IP src/dst and send it back */ ip4_header_t *ip4 = &t->ip4; ip_csum_t sum0 = ip4->checksum; ip4->checksum = 0; ip4->src_address.as_u32 = ip4->dst_address.as_u32; ip4->dst_address.as_u32 = gtpu->ip4.src_address.as_u32; ip4->checksum = ip4_header_checksum (ip4); udp_header_t *udp = &t->udp; udp->src_port = udp->dst_port; udp->dst_port = clib_host_to_net_u16 (UDP_DST_PORT_GTPU); /* Process GTPU message type and sequence number */ gtpu->flags = GTPU_ECHO_RSP; gtpu->message_type = GTPU_ECHO_REQUEST; gtpu->sequence_number = gtpu->sequence_number + 1; vlib_buffer_t *b = vlib_buffer_from_rte_mbuf (gtpu->buffer); vlib_buffer_advance (b, -(word) sizeof (ip4_header_t)); b->current_data -= sizeof (ip4_header_t); b->current_length += sizeof (ip4_header_t); b->total_length_not_including_first_buffer += sizeof (ip4_header_t); sum0 = ip_csum_update (sum0, 0, 0, ip4->src_address.as_u32); sum0 = ip_csum_update (sum0, 0, 0, ip4->dst_address.as_u32); udp->length = clib_host_to_net_u16 (b->current_length); sum0 = ip_csum_update (sum0, 0, 0, udp->length); gtpu->length = clib_host_to_net_u16 (b->current_length - sizeof (*ip4) - sizeof (*udp)); sum0 = ip_csum_update (sum0, 0, 0, gtpu->length); /* Process GTPU message checksum */ sum0 = ip_csum_with_carry (sum0, gtpu->flags); sum0 = ip_csum_with_carry (sum0, gtpu->message_type); sum0 = ip_csum_with_carry (sum0, clib_host_to_net_u16 (gtpu->length)); sum0 = ip_csum_with_carry (sum0, clib_host_to_net_u32 (gtpu->teid)); sum0 = ip_csum_with_carry (sum0, clib_host_to_net_u16 (gtpu->sequence_number)); gtpu->checksum = ~ip_csum_fold (sum0); vlib_buffer_enqueue_to_next (vm, node, &b, 1, /* next_index */ 1); } ``` 在这个函数中,我们首先对消息类型进行处理,将其设置为Echo Request。然后,我们还对序列号进行处理,将其加1后设置为Echo Response的序列号。最后,我们根据GTPU协议的要求,计算出消息的校验和,并将其写入到GTPU头中。这样,我们就完成了对消息类型和序列号的处理。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值