linux ntp时间立即同步命令_走进大数据丨 部署NTP时间同步服务器

  1. 查看集群服务器的Linux版本,确保相同

[root@cdh1 ~]# cat /etc/redhat-releaseCentOS Linux release 7.2.1511 (Core)
  1. 查看服务器是否安装ntp服务(集群的每个节点)

[root@cdh1 ~]# rpm -qa | grep ntpfontpackages-filesystem-1.44-8.el7.noarchntpdate-4.2.6p5-29.el7.centos.x86_64ntp-4.2.6p5-29.el7.centos.x86_64
  1. 如果没有安装使用以下命令安装(集群每个节点)

[root@cdh1 ~]# yum install ntp ntpdate -y
  1. 查看NTP服务的状态(集群每个节点)

[root@cdh1 ~]# systemctl status ntpd.service● ntpd.service - Network Time Service   Loaded: loaded (/usr/lib/systemd/system/ntpd.service; disabled; vendor preset: disabled)   Active: inactive (dead)
  1. 修改NTP服务器的机器的配置文件,我的是cdh1机器是服务器

[root@cdh1 ~]# vi /etc/ntp.conf#找到如下内容注释掉# Please consider joining the pool (http://www.pool.ntp.org/join.html).server 0.centos.pool.ntp.org iburstserver 1.centos.pool.ntp.org iburstserver 2.centos.pool.ntp.org iburstserver 3.centos.pool.ntp.org iburst#添加以下内容,同步本地时间server 127.127.1.0 iburst
  1. 启动cdh1节点的NTP服务

[root@cdh1 ~]# systemctl start ntpd.service
  1. 设置cdh1节点NTP开机启动

[root@cdh1 ~]# systemctl enable ntpd.service
  1. 在cdh1查看NTP状态

[root@cdh1 ~]# systemctl status ntpd.service● ntpd.service - Network Time Service   Loaded: loaded (/usr/lib/systemd/system/ntpd.service; enabled; vendor preset: disabled)   Active: active (running) since Sat 2019-09-28 21:17:35 CST; 2min 10s ago Main PID: 72322 (ntpd)   CGroup: /system.slice/ntpd.service           └─72322 /usr/sbin/ntpd -u ntp:ntp -gSep 28 21:17:35 cdh1 ntpd[72322]: Listen normally on 2 lo 127.0.0.1 UDP 123Sep 28 21:17:35 cdh1 ntpd[72322]: Listen normally on 3 eno16777736 192.168.20.134 UDP 123Sep 28 21:17:35 cdh1 ntpd[72322]: Listen normally on 4 lo ::1 UDP 123Sep 28 21:17:35 cdh1 ntpd[72322]: Listen normally on 5 eno16777736 fe80::20c:29ff:fe45:70d1 UDP 123Sep 28 21:17:35 cdh1 ntpd[72322]: Listening on routing socket on fd #22 for interface updatesSep 28 21:17:35 cdh1 ntpd[72322]: 0.0.0.0 c016 06 restartSep 28 21:17:35 cdh1 ntpd[72322]: 0.0.0.0 c012 02 freq_set kernel 0.000 PPMSep 28 21:17:35 cdh1 ntpd[72322]: 0.0.0.0 c011 01 freq_not_setSep 28 21:17:35 cdh1 systemd[1]: Started Network Time Service.Sep 28 21:17:36 cdh1 ntpd[72322]: 0.0.0.0 c514 04 freq_mode
  1. cdh1节点查看是否同步:关闭防火墙或者开放123端口

[root@cdh1 ~]# ntpq -p     remote           refid      st t when poll reach   delay   offset  jitter==============================================================================*LOCAL(0)        .LOCL.           5 l   47   64    7    0.000    0.000   0.000
  1. 配置客户机的NTP服务,修改配置文件

#注释其他上游服务器#server 0.centos.pool.ntp.org iburst#server 1.centos.pool.ntp.org iburst#server 2.centos.pool.ntp.org iburst#server 3.centos.pool.ntp.org iburst#配置上游时间服务器为本地的ntpd Server服务器server 192.168.20.134#配置允许上游时间服务器主动修改本机的时间restrict 192.168.20.134 nomodify notrap noquery
  1. 将客户机的时间与服务器的同步下

[root@cdh2 ~]# ntpdate -u 192.168.20.13428 Sep 21:29:49 ntpdate[99848]: step time server 192.168.20.134 offset 18.103932 sec
  1. 启动客户端的NTP服务&配置开机启动NTP

[root@cdh2 ~]# systemctl start ntpd.service[root@cdh2 ~]# systemctl enable ntpd.service
  1. 查看客户机的NTP状态

[root@cdh2 ~]# systemctl status ntpd.service● ntpd.service - Network Time Service   Loaded: loaded (/usr/lib/systemd/system/ntpd.service; enabled; vendor preset: disabled)   Active: active (running) since Sat 2019-09-28 21:31:26 CST; 38s ago Main PID: 100613 (ntpd)   CGroup: /system.slice/ntpd.service           └─100613 /usr/sbin/ntpd -u ntp:ntp -gSep 28 21:31:26 cdh2 ntpd[100613]: Listen and drop on 1 v6wildcard :: UDP 123Sep 28 21:31:26 cdh2 ntpd[100613]: Listen normally on 2 lo 127.0.0.1 UDP 123Sep 28 21:31:26 cdh2 ntpd[100613]: Listen normally on 3 eno16777736 192.168.20.132 UDP 123Sep 28 21:31:26 cdh2 ntpd[100613]: Listen normally on 4 lo ::1 UDP 123Sep 28 21:31:26 cdh2 ntpd[100613]: Listen normally on 5 eno16777736 fe80::20c:29ff:feb3:f5ad UDP 123Sep 28 21:31:26 cdh2 ntpd[100613]: Listening on routing socket on fd #22 for interface updatesSep 28 21:31:26 cdh2 ntpd[100613]: 0.0.0.0 c016 06 restartSep 28 21:31:26 cdh2 ntpd[100613]: 0.0.0.0 c012 02 freq_set kernel 0.000 PPMSep 28 21:31:26 cdh2 ntpd[100613]: 0.0.0.0 c011 01 freq_not_setSep 28 21:31:26 cdh2 systemd[1]: Started Network Time Service.
  1. 查看时间是否同步

[root@cdh2 ~]# ntpq -p     remote           refid      st t when poll reach   delay   offset  jitter============================================================================== cdh1            LOCAL(0)         6 u   14   64    3    1.092    9.130   3.475

通过以上操作即可以解决配置hbase或者cdh等集群的时间不同步问题。

22c6dcfbd1d5be654aad8761774390ee.png

表情包
插入表情
评论将由博主筛选后显示,对所有人可见 | 还能输入1000个字符
相关推荐
©️2020 CSDN 皮肤主题: 1024 设计师:白松林 返回首页