我已经处理好了,之前是因为串口驱动异常导致。
我用网线直连笔记本和MP口(MP口默认地址:192.168.0.1,不知道MP口的,可以直接重置MP口)。
我的操作如下:
MP login: Admin
MP password:(Admin)
(c)Copyright 2000-2008 Hewlett-Packard Co., All Rights Reserved.
Welcome to
rx8640\'s Management Processor
MP MAIN MENU:
CO: Consoles
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Logs
SL: Show Logs
FW: Firmware Update
HE: Help
X: Exit Connection
[mp00265510ee8a] MP> CM
Enter HE to get a list of available commands
(Use ^B to return to main menu.)
[mp00265510ee8a] MP:CM> LS
Current configuration of MP customer LAN interface
MAC address : 00:26:55:10:ee:8a
DHCP Status : Enabled
IP address : 0.0.0.0 0x00000000
Hostname : mp00265510ee8a
Subnet mask : 0.0.0.0 0x00000000
Gateway : 0.0.0.0 0x00000000
Status : UP and RUNNING
Link : Connected 10Mb Half Duplex
Current configuration of Integrity Lights Out Advanced KVM card LAN interface
No Integrity Lights Out Advanced KVM Cards were found
[mp00265510ee8a] MP:CM>lc
MP Configurable LAN devices:
1 - MP Customer LAN
Enter LAN device to change, or [Q] to Quit: 1
Current configuration of MP customer LAN interface
MAC address : 00:26:55:10:ee:8a
DHCP Status : Enabled
IP address : 0.0.0.0 0x00000000
Hostname : mp00265510ee8a
Subnet mask : 0.0.0.0 0x00000000
Gateway : 0.0.0.0 0x00000000
Status : UP and RUNNING
Link : Connected 10Mb Half Duplex
Do you want to modify the configuration for the MP LAN? (Y/[N]) y
Current DHCP Status is: Enabled
Do you want to modify it? (Y/[N]) y
Toggle DHCP State? (Y/[N]) y
New DHCP Status will be: Disabled
Please confirm (Y/[N]) y
-> DHCP Status will be updated.
Static IP Address is: 192.168.1.1
Do you want to modify it? (Y/[N]) y
Enter new IP Address : 172.96.28.3
New IP Address will be: 172.96.28.3
Please confirm (Y/[N]) y
-> IP Address will be updated.
Current MP Network Name is: mp00265510ee8a
Do you want to modify it? (Y/[N]) n
Static Subnet Mask is: 255.255.255.0
Do you want to modify it? (Y/[N]) n
Static Gateway is: 192.168.1.1
Do you want to modify it? (Y/[N]) (Default will be IP address.) y
Enter new Gateway : 172.96.28.254
New Gateway will be: 172.96.28.254
Please confirm (Y/[N]) y
-> Gateway will be updated.
Current Data Rate is: Auto Negotiate
Do you want to modify it? (Y/[N])
遗失对主机的连接。
重新配置主机的地址,和MP同网段即可telnet 连上。收起