linux em1改eth0,ubuntu14.04怎么把 em1改为eth0

如果ethtool eth0显示的信息类似与下面Settings for eth0:Supported ports: [ TP ]Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/FullSupports auto-negotiation: YesAdvertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full说明eth0是千兆网卡，如果ethtool eth0显示的信息类似与下面Settings for eth0:Supported ports: [ TP ]Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/FullSupports auto-negotiation: YesAdvertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full说明eth0是百兆网卡。对网络进行设置，可以编辑vi /etc/network/interfaces,类似与下# This file describes the network interfaces available on your system# and how to activate them. For more information, see interfaces(5).# The loopback network interfaceauto loiface lo inet loopbackauto eth0 #设置eth0iface eth0 inet static address 192.168.37.76 netmask 255.255.255.0 network 192.168.37.0 broadcast 192.168.37.255 gateway 192.168.37.254 dns-nameservers 192.168.37.254 #auto eth1 #设置eth1#iface eth1 inet static#address xxx #auto eth0:1 #单网卡设置多个IP#iface eth0:1 inet static#address 192.168.1.60#netmask 255.255.255.0#network x.x.x.x#broadcast x.x.x.x#gateway x.x.x.x设置完后重启网络/etc/init.d/networking restart

取消

评论