全志r16android sdk,全志 Allwinner R16 SoC 全套设计资料分享 原理图 PCB 数据手册 SDK...

本文分享了全志Allwinner R16 SoC的设计资料,包括四核Cortex-A7处理器、Mali400MP2 GPU、多媒体性能等。提供了Android SDK、Tina OS SDK、硬件参考设计、原理图等资源,适用于智能音箱、相框、机器人的开发。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

全志 Allwinner R16 SoC 全套设计资料分享 原理图 PCB 数据手册 SDK

全志 Allwinner R16 SoC是珠海全志科技针对智能音箱、智能相框、智能机器人等智能硬件产品推出的解决方案,全志R16采用了极具性价比的四核ARM Cortex-A7架构处理器,具有强大的运算性能和丰富的接口;支持基于Linux的开源系统Tina™, (Tina™是全志科技全力打造的专门用于全志智能硬件平台的系统软件品牌);支持AirPlay、DLNA、Qplay、Airkiss、Smart Link等多种网络应用协议;提供独特的算法、IP包,使开发者可以专注于其自有应用和产品市场运营,降低产品开发成本,并缩短开发周期。

Allwinner R16 SoC 基本性能:

CPU:

• Quad-core Cortex™-A7

• 256KB L1 Cache,512KB L2 Cache

GPU:

• Mali400MP2

• Supports OpenGL ES 2.0 / VG 1.1 standards

Display:

• Supports 1/2/4-lane MIPI DSI up to 1280×800 resolution

• Supports MIPI DSI V1.01 and MIPI D-PHY V1.00

• Supports command mode and video mode(non-burst mode with sync pulses, non-burst mode with sync event and burst mode)

• Supports RGB/CPU/LVDS LCD up to 1280×800 resolution

Memory:

• Supports 16-bit two ranks DDR3/DDR3L SDRAM controller, supports memory capacity up to 2GB

• Supports 8-bit NAND Flash controller

• Supports MLC/TLC/SLC/EF-NAND, 2 flash chips, ECC 64-bit

Video:

• Supports 1080p@60fps video playback

• Supports multi-format FHD video decoding, including Mpeg1/2, Mpeg4 SP/ASP GMC, H.263, H.264, WMV9/VC-1, VP8, etc.

• Supports H.264 High Profile 1080p@60fps encoding

• Complies with RTSP, HTTP, HLS, RTMP, MMS streaming media protocols

• Supports OpenMax protocol

Audio:

• Integrated Hi-Fi audio codec

• Two integrated differential analog mic amplifiers for headset and phone

Camera:

• Integrated parallel camera sensor interface

• Supports 5M CMOS sensor

• Supports 8-bit YUV sensor

资料中包括:

R16 相关的设计文档,不仅仅是芯片Datasheet哦,还有Android系统的定制说明,全志的TINA OS SDK 下载编译使用说明等等

R16 的硬件参考设计 包括原理图 DRAM部分的核心设计 大家可以直接复用 layout指南等等

R16 Android SDK 源码包

R16 外设支持列表

R16 原理图及PCB Layout Checklist文档

如何下载全志 R16 SoC 全套设计资料

您可以免费注册成为博客用户,直接在博客网站页面里获取对应的下载资源链接,或者如下所示,关注老wu博客的公众号,并在公众号里发送对应的下载关键字获取下载链接

关注吴川斌的博客公众号

在公众号里给老吴发消息:

下载|全志 R16 SoC 全套设计资料

或者

下载|6247

建议复制粘贴过去不会码错字哟,O(∩_∩)O~

wechat

全志R16平台 parrotv1.1(Android4.4.2) /* * Store information about the video data format. */ static struct sensor_format_struct { __u8 *desc; //__u32 pixelformat; enum v4l2_mbus_pixelcode mbus_code;//linux-3.0 struct regval_list *regs; int regs_size; int bpp; /* Bytes per pixel */ } sensor_formats[] = { //{ // .desc = "YUYV 4:2:2", // .mbus_code = V4L2_MBUS_FMT_YUYV8_2X8,//linux-3.0 // .regs = sensor_fmt_yuv422_yuyv, // .regs_size = ARRAY_SIZE(sensor_fmt_yuv422_yuyv), // .bpp = 2, //}, //{ // .desc = "YVYU 4:2:2", // .mbus_code = V4L2_MBUS_FMT_YVYU8_2X8,//linux-3.0 // .regs = sensor_fmt_yuv422_yvyu, // .regs_size = ARRAY_SIZE(sensor_fmt_yuv422_yvyu), // .bpp = 2, //}, { .desc = "UYVY 4:2:2", .mbus_code = V4L2_MBUS_FMT_UYVY8_2X8,//linux-3.0 .regs = sensor_fmt_yuv422_uyvy, .regs_size = ARRAY_SIZE(sensor_fmt_yuv422_uyvy), .bpp = 2, }, //{ // .desc = "VYUY 4:2:2", // .mbus_code = V4L2_MBUS_FMT_VYUY8_2X8,//linux-3.0 // .regs = sensor_fmt_yuv422_vyuy, // .regs_size = ARRAY_SIZE(sensor_fmt_yuv422_vyuy), // .bpp = 2, //}, //{ // .desc = "Raw RGB Bayer", // .mbus_code = V4L2_MBUS_FMT_SBGGR8_1X8,//linux-3.0 // .regs = sensor_fmt_raw, // .regs_size = ARRAY_SIZE(sensor_fmt_raw), // .bpp = 1 //}, }; #define N_FMTS ARRAY_SIZE(sensor_formats) /* * Then there is the issue of window sizes. Try to capture the info here. */ static struct sensor_win_size sensor_win_sizes[] = { // /* UXGA */ // { // .width = UXGA_WIDTH, // .height = UXGA_HEIGHT, // .hoffset = 0, // .voffset = 0, // .regs = sensor_uxga_regs, // .regs_size = ARRAY_SIZE(sensor_uxga_regs), // .set_size = NULL, // }, //// /* 720p */ //// { //// .width = HD720_WIDTH, //// .height = HD720_HEIGHT, //// .hoffset = 0, //// .voffset = 0, //// .regs = Gc2015_sensor_hd720_regs, //// .regs_size = ARRAY_SIZE(Gc2015_sensor_hd720_regs), //// .set_size = NULL, //// }, // /* SVGA */ // { // .width = SVGA_WIDTH, // .height = SVGA_HEIGHT, // .hoffset = 0, // .voffset = 0, // .regs = sensor_svga_regs, // .regs_size = ARRAY_SIZE(sensor_svga_regs), // .set_size = NULL, // }, // /* VGA */ // { // .width = VGA_WIDTH, // .height = VGA_HEIGHT, // .hoffset = 0, // .voffset = 0, // .regs = sensor_vga_regs, // .regs_size = ARRAY_SIZE(sensor_vga_regs), // .set_size = NULL, // }, /* VGA */ { .width = VGA_WIDTH, .height = VGA_HEIGHT, .hoffset = 0, .voffset = 0, .regs = sensor_default_regs, .regs_size = ARRAY_SIZE(sensor_default_regs), .set_size = NULL, }, };
全志R16平台编译linux系统V1.0.txt 2017/4/11 13:36 (编译请使用编译android的lichee的选项编译生成的.config文件,不然直接编译会报错!!!!) rootroot@cm-System-Product-Name:/home/wwt/linux_r16$ tar zxvf lichee_parrotv1.1_20161202.tar.gz rootroot@cm-System-Product-Name:/home/wwt/linux_r16$ cd lichee/ rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ ./build.sh config Welcome to mkscript setup progress All available chips: 0. sun8iw5p1 Choice: 0 All available platforms: 0. android 1. dragonboard 2. linux 3. tina Choice: 2 All available kernel: 0. linux-3.4 Choice: 0 All available boards: 0. bell-one 1. evb 2. evb-20 3. evb-30 4. evb-rtl8723bs 5. sc3813r Choice: 3 rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ ./build.sh 错误1: KCONFIG_AUTOCONFIG=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/auto.conf KCONFIG_AUTOHEADER=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/autoconf.h KCONFIG_TRISTATE=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/tristate.config BUILDROOT_CONFIG=/home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/.config /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/conf --silentoldconfig Config.in # # make dependencies written to .auto.deps # ATTENTION buildroot devels! # See top of this file before playing with this auto-preprequisites! # make[1]:正在离开目录 `/home/wwt/linux_r16/lichee/buildroot' You must install 'makeinfo' on your build machine makeinfo is usually part of the texinfo package in your distribution make: *** [dependencies] 错误 1 make:离开目录“/home/wwt/linux_r16/lichee/buildroot” ERROR: build buildroot Failed rootroot@cm-System-Product-Name:/home/wwt/linux_r16/lichee$ d/buildroot-config/conf.o /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buildroot/build/buildroot-config/zconf.tab.o -o /home/wwt/linux_r16/lichee/out/sun8iw5p1/linux/common/buil
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值