1)VTP功能
传递vlan信息,达到简化vlan配置的效果
2)VTP传递条件
(1)trunk
(2)域名
(3)密码相同
sw1#sh vtp status
VTP Version : 2
Configuration Revision : 1
Maximum VLANs supported locally : 36
Number of existing VLANs : 6
VTP Operating Mode : Server
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
3)同步条件
配置修订号高---->低
默认是0
4)VTP操作模式
server client transparent
add/del/mod yes no yes
学习VTP yes yes no
转发VTP yes yes yes
保存 vlan.dat vlan.dat config.text
5)VTP配置
sw1(config)#vtp domain uplooking 域名命名为uplooking
sw1#sh vtp status
sw1#sh vtp password
6)、VTP pruning:减少trunk链路不必要的广播
实现:
sw1(config)#vtp pruning
sw1#sh int trunk
Port Vlans in spanning tree forwarding state and not pruned
Fa1/13 1-2 修剪之前的效果
SW2(config)#int f1/0
SW2(config-if)#sw acc vlan 1
sw1#sh int trunk
Port Vlans in spanning tree forwarding state and not pruned
Fa1/13 1 修剪之后的效果
碰到内存不够解决方法
copy run start--->erase flash:-->stop SW1--->start SW1
注意:如果加一台switch到现有网络中,要保证修订号为0
1)改域名
2)transparent
3)删除vlan.dat文件
转载于:https://blog.51cto.com/cisco130/887161