内核移植(2)arch/arm/mach-s3c2440/mach-smdk2440.c-CSDN博客

对于s3c2410、s3c2440开发板，它们的CPU Id都是0x41129200，在arch/arm/mm/proc -arm920.S中的_ _arm920_proc_info结构中。

定义开发板参数在arch/arm/mach-s3c2440/mach-smdk2440.c中，如机器类型ID、起始I/O物理地址、Bootloader传入的参数的地址、中断初始化函数等。

arch/arm/kernel/head.S是内核执行的第一个文件。

S3c2440开发板上启动uImage时串口输出乱码的原因，开发板晶振的频率设置有问题。

1、在arch/arm/mach-s3c2440/mach-smdk2440.c修改，

static void __init smdk2440_map_io(void)

{

s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));

s3c24xx_init_clocks(16934400);

s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));

}

修改为：

static void __init smdk2440_map_io(void)

{

s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));

s3c24xx_init_clocks(12000000);

s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));

}

U-Boot控制界面，看到内核的启动信息如下：

OpenJTAG> bootm 0x32000000

## Booting image at 32000000 ...

Image Name: Linux-2.6.22.6

Created: 2009-12-09 11:36:02 UTC

Image Type: ARM Linux Kernel Image (uncompressed)

Data Size: 1511064 Bytes = 1.4 MB

Load Address: 30008000

Entry Point: 30008000

Verifying Checksum ... OK

Starting kernel ...

Uncompressing Linux................................................................................................... done, booting the kernel.

Linux version 2.6.22.6 (root@huanghuang-desktop) (gcc version 3.4.5) #1 Wed Dec 9 19:35:58 CST 2009

CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177

Machine: SMDK2410

Memory policy: ECC disabled, Data cache writeback

CPU S3C2410A (id 0x32410002)

S3C2410: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz

CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on

CPU0: D VIVT write-back cache

CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets

CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets

Built 1 zonelists. Total pages: 16256

Kernel command line: noinitrd root=/dev/mtdblock3 init=/linuxrc console=ttySAC0

irq: clearing subpending status 00000002

PID hash table entries: 256 (order: 8, 1024 bytes)

timer tcon=00500000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8

Console: colour dummy device 80x30

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 64MB = 64MB total

Memory: 61696KB available (2788K code, 313K data, 132K init)

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

NET: Registered protocol family 16

S3C2410: Initialising architecture

DMA channel 0 at c4800000, irq 33

DMA channel 1 at c4800040, irq 34

DMA channel 2 at c4800080, irq 35

DMA channel 3 at c48000c0, irq 36

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

NET: Registered protocol family 2

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

TCP established hash table entries: 2048 (order: 2, 16384 bytes)

TCP bind hash table entries: 2048 (order: 1, 8192 bytes)

TCP: Hash tables configured (established 2048 bind 2048)

TCP reno registered

NetWinder Floating Point Emulator V0.97 (double precision)

io scheduler noop registered

io scheduler anticipatory registered (default)

io scheduler deadline registered

io scheduler cfq registered

s3c2410-lcd s3c2410-lcd: no platform data for lcd, cannot attach

s3c2410-lcd: probe of s3c2410-lcd failed with error -22

lp: driver loaded but no devices found

ppdev: user-space parallel port driver

Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

s3c2410-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2410

s3c2410-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2410

s3c2410-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2410

RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize

loop: module loaded

dm9000 Ethernet Driver

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx

s3c2410-nand s3c2410-nand: Tacls=3, 30ns Twrph0=7 70ns, Twrph1=3 30ns

NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V 8-bit)

Scanning device for bad blocks

Creating 8 MTD partitions on "NAND 64MiB 3,3V 8-bit":

0x00000000-0x00004000 : "Boot Agent"

0x00000000-0x00200000 : "S3C2410 flash partition 1"

0x00400000-0x00800000 : "S3C2410 flash partition 2"

0x00800000-0x00a00000 : "S3C2410 flash partition 3"

0x00a00000-0x00e00000 : "S3C2410 flash partition 4"

0x00e00000-0x01800000 : "S3C2410 flash partition 5"

0x01800000-0x03000000 : "S3C2410 flash partition 6"

0x03000000-0x04000000 : "S3C2410 flash partition 7"

usbmon: debugfs is not available

s3c2410-ohci s3c2410-ohci: S3C24XX OHCI

s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1

s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000

usb usb1: configuration #1 chosen from 1 choice

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

mice: PS/2 mouse device common for all mice

s3c2410-i2c s3c2410-i2c: slave address 0x10

s3c2410-i2c s3c2410-i2c: bus frequency set to 390 KHz

s3c2410-i2c s3c2410-i2c: i2c-0: S3C I2C adapter

TCP cubic registered

NET: Registered protocol family 1

drivers/rtc/hctosys.c: unable to open rtc device (rtc0)

List of all partitions:

1f00 16 mtdblock0 (driver?)

1f01 2048 mtdblock1 (driver?)

1f02 4096 mtdblock2 (driver?)

1f03 2048 mtdblock3 (driver?)

1f04 4096 mtdblock4 (driver?)

1f05 10240 mtdblock5 (driver?)

1f06 24576 mtdblock6 (driver?)

1f07 16384 mtdblock7 (driver?)

No filesystem could mount root, tried: ext3 ext2 cramfs msdos vfat romfs

Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,3)