Ubuntu下源码安装Nginx-1.1.10+PHP5.2.13+phpfpm+Mysq...

于 2013-03-12 16:45:00 发布
阅读量199 收藏
点赞数
文章标签： php shell awk
原文链接：https://my.oschina.net/wojibuzhu/blog/113253
版权

2019独角兽企业重金招聘Python工程师标准>>> hot3.png


1.Nginx("engine x") 是一个高性能的 HTTP 和反向代理服务器，也是一个 IMAP/POP3/SMTP 代理服务器

2.本文实现Ubuntu下源码编译安装

Nginx-1.1.10+PHP5.2.13+fastfpm+Mysql5.5+eaccelerator

(之所以选择PHP 5.2的版本主要一是因为跟张宴大师学习，二是fast-fpm在php5.2还是分开的，在php5.3已经集成捆绑到php中了，先单独安装熟悉下)

3.对安装过程中遇到的”坑“都做了详细的记录，以备作为以后再次安装时注意的点

4.开启10个nginx进程(10*15M)，32个php-cgi进程(32*20)，在自己512M的虚拟机上测试10000的并发仍然可以正常访问网站


5.安装步骤详解：（系统要求：Linux 2.6+ 内核，本文中的Linux操作系统为Ubuntu11）

6.贴一个如何看ngxinx日志哪个时间段访问量多少的shell命令， 

awk ' {split($4,d,"/"); ++S[substr(d[3],1,7)]} END {for(i in S) print i,S[i]}' wwwlogs.log  awk ' {split($4,d,"/");

一.软件准备: 


mkdir -p /data0/software
cd /data0/software

wget http://nginx.org/download/nginx-1.1.10.tar.gz
wget http://blog.s135.com/soft/linux/nginx_php/php/php-5.2.14.tar.gz
wget http://blog.s135.com/soft/linux/nginx_php/phpfpm/php-5.2.14-fpm-0.5.14.diff.gz
wget http://blog.s135.com/soft/linux/nginx_php/mysql/mysql-5.5.3-m3.tar.gz
wget http://blog.s135.com/soft/linux/nginx_php/libiconv/libiconv-1.13.1.tar.gz
wget http://blog.s135.com/soft/linux/nginx_php/mcrypt/libmcrypt-2.5.8.tar.gz
wget http://blog.s135.com/soft/linux/nginx_php/mcrypt/mcrypt-2.6.8.tar.gz
wget http://blog.s135.com/soft/linux/nginx_php/memcache/memcache-2.2.5.tgz
wget http://blog.s135.com/soft/linux/nginx_php/mhash/mhash-0.9.9.9.tar.gz
wget http://blog.s135.com/soft/linux/nginx_php/pcre/pcre-8.10.tar.gz
wget http://blog.s135.com/soft/linux/nginx_php/eaccelerator/eaccelerator-0.9.6.1.tar.bz2
wget http://blog.s135.com/soft/linux/nginx_php/pdo/PDO_MYSQL-1.0.2.tgz wget http://blog.s135.com/soft/linux/nginx_php/imagick/ImageMagick.tar.gz wget http://blog.s135.com/soft/linux/nginx_php/imagick/imagick-2.3.0.tgz
二.系统工具和依赖库准备(因为刚装的虚拟机系统缺少的库多，安装中会遇到不少问题) 



apt-get install gcc g++ ssh automake cmake build-essential autoconf make re2c wget cron bzip2 
rcconf flex vim bison m4 mawk cpp binutils libncurses5 unzip tar libncurses5 libncurses5-dev 
libtool libpcre3 libpcrecpp0 libssl-dev zlibc openssl libxml2-dev libltdl3-dev libpcre3 
libpcrecpp0 libssl-dev zlibc openssl libxml2-dev libltdl3-dev libmcrypt-dev  curl libpng 
libjpeg freetype sasl
我在后面的安装过程中缺少了curl libpng libjpeg freetype sasl ，这时候可以预先安装


三.安装PHP 5.2.14（FastCGI模式）
　　1、编译安装PHP 5.2.14所需的支持库： 

tar zxvf libiconv-1.13.1.tar.gz
cd libiconv-1.13.1/
./configure --prefix=/usr/local
make
make install
cd ../

tar zxvf libmcrypt-2.5.8.tar.gz
cd libmcrypt-2.5.8/
./configure
make
make install
/sbin/ldconfig
cd libltdl/
./configure --enable-ltdl-install
make
make install
cd ../../

tar zxvf mhash-0.9.9.9.tar.gz
cd mhash-0.9.9.9/
./configure
make
make install
cd ../

软链将 /usr/local/lib下安装的支持库指到/usr/bin/目录下
ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
ln -s /usr/local/lib/libmhash.so.2 /usr/lib/libmhash.so.2
ln -s /usr/local/lib/libmhash.so.2.0.1 /usr/lib/libmhash.so.2.0.1
ln -s /usr/local/bin/libmcrypt-config /usr/bin/libmcrypt-config

tar zxvf mcrypt-2.6.8.tar.gz
cd mcrypt-2.6.8/
/sbin/ldconfig
./configure
make
make install
cd ../


2、编译安装MySQL 5.5.3-m3 

/usr/sbin/groupadd mysql
/usr/sbin/useradd -g mysql mysql
tar zxvf mysql-5.5.3-m3.tar.gz
cd mysql-5.5.3-m3/
./configure --prefix=/usr/local/webserver/mysql/ --enable-assembler --with-extra-charsets=complex --enable-thread-safe-client --with-big-tables --with-readline --with-ssl --with-embedded-server --enable-local-infile --with-plugins=partition,innobase,myisammrg
make && make install
chmod +w /usr/local/webserver/mysql
chown -R mysql:mysql /usr/local/webserver/mysql
cd ../
在make的时候遇到这样的错误,网上说是mysql的bug，不太相信，但是不知道原因，求解 
make[2]: *** [do_abi_check] 错误 1
make[2]: Leaving directory `/tmp/mysql-5.5.3-m3′
make[1]: *** [abi_check] 错误 2
make[1]: Leaving directory `/tmp/mysql-5.5.3-m3′
解决方法: 
vi Makefile
/do_abi_check
删除一下部分:
 set -ex; \
    for file in $(abi_headers); do \
             gcc -E -nostdinc -dI \
                      -I$(top_srcdir)/include \
                      -I$(top_srcdir)/include/mysql \
                      -I$(top_srcdir)/sql \
                      -I$(top_builddir)/include \
                      -I$(top_builddir)/include/mysql \
                      -I$(top_builddir)/sql \
                                     $$file 2>/dev/null | \
                      /bin/sed -e '/^# /d' \
                                -e '/^[     ]*$$/d' \
                                -e '/^#pragma GCC set_debug_pwd/d' \
                                -e '/^#ident/d' > \
                                           $(top_builddir)/abi_check.out; \
                      /usr/bin/diff -w $$file.pp $(top_builddir)/abi_check.out; \
                      /bin/rm $(top_builddir)/abi_check.out; \
    done


2.1创建MySQL数据库存放目录 


mkdir -p /data0/mysql/3306/data/
mkdir -p /data0/mysql/3306/binlog/
mkdir -p /data0/mysql/3306/relaylog/
chown -R mysql:mysql /data0/mysql/


2.2以mysql用户帐号的身份建立数据表： 


/usr/local/webserver/mysql/bin/mysql_install_db --basedir=/usr/local/webserver/mysql --datadir=/data0/mysql/3306/data --user=mysql
2.3 创建my.cnf配置文件： 



vi /data0/mysql/3306/my.cnf
输入以下内容： 
[client]
character-set-server = utf8
port    = 3306
socket  = /tmp/mysql.sock

[mysqld]
character-set-server = utf8
replicate-ignore-db = mysql
replicate-ignore-db = test
replicate-ignore-db = information_schema
user    = mysql
port    = 3306
socket  = /tmp/mysql.sock
basedir = /usr/local/webserver/mysql
datadir = /data0/mysql/3306/data
log-error = /data0/mysql/3306/mysql_error.log
pid-file = /data0/mysql/3306/mysql.pid
open_files_limit    = 10240
back_log = 600
max_connections = 5000
max_connect_errors = 6000
table_cache = 614
external-locking = FALSE
max_allowed_packet = 32M
sort_buffer_size = 1M
join_buffer_size = 1M
thread_cache_size = 300
#thread_concurrency = 8
query_cache_size = 512M
query_cache_limit = 2M
query_cache_min_res_unit = 2k
default-storage-engine = MyISAM
thread_stack = 192K
transaction_isolation = READ-COMMITTED
tmp_table_size = 246M
max_heap_table_size = 246M
long_query_time = 3
log-slave-updates
log-bin = /data0/mysql/3306/binlog/binlog
binlog_cache_size = 4M
binlog_format = MIXED
max_binlog_cache_size = 8M
max_binlog_size = 1G
relay-log-index = /data0/mysql/3306/relaylog/relaylog
relay-log-info-file = /data0/mysql/3306/relaylog/relaylog
relay-log = /data0/mysql/3306/relaylog/relaylog
expire_logs_days = 30
key_buffer_size = 256M
read_buffer_size = 1M
read_rnd_buffer_size = 16M
bulk_insert_buffer_size = 64M
myisam_sort_buffer_size = 128M
myisam_max_sort_file_size = 10G
myisam_repair_threads = 1
myisam_recover

interactive_timeout = 120
wait_timeout = 120

skip-name-resolve
#master-connect-retry = 10
slave-skip-errors = 1032,1062,126,1114,1146,1048,1396

#master-host     =   192.168.1.2
#master-user     =   username
#master-password =   password
#master-port     =  3306

server-id = 1

innodb_additional_mem_pool_size = 16M
innodb_buffer_pool_size = 512M
innodb_data_file_path = ibdata1:256M:autoextend
innodb_file_io_threads = 4
innodb_thread_concurrency = 8
innodb_flush_log_at_trx_commit = 2
innodb_log_buffer_size = 16M
innodb_log_file_size = 128M
innodb_log_files_in_group = 3
innodb_max_dirty_pages_pct = 90
innodb_lock_wait_timeout = 120
innodb_file_per_table = 0

#log-slow-queries = /data0/mysql/3306/slow.log
#long_query_time = 10

[mysqldump]
quick
max_allowed_packet = 32M
2.4 创建管理MySQL数据库的shell脚本： 



#!/bin/sh

mysql_port=3306
mysql_username="admin"
mysql_password="12345678"

function_start_mysql()
{
    printf "Starting MySQL...\n"
    /bin/sh /usr/local/webserver/mysql/bin/mysqld_safe --defaults-file=/data0/mysql/${mysql_port}/my.cnf 2>&1 > /dev/null &
}

function_stop_mysql()
{
    printf "Stoping MySQL...\n"
    /usr/local/webserver/mysql/bin/mysqladmin -u ${mysql_username} -p${mysql_password} -S /tmp/mysql.sock shutdown
}

function_restart_mysql()
{
    printf "Restarting MySQL...\n"
    function_stop_mysql
    sleep 5
    function_start_mysql
}

function_kill_mysql()
{
    kill -9 $(ps -ef | grep 'bin/mysqld_safe' | grep ${mysql_port} | awk '{printf $2}')
    kill -9 $(ps -ef | grep 'libexec/mysqld' | grep ${mysql_port} | awk '{printf $2}')
}

if [ "$1" = "start" ]; then
    function_start_mysql
elif [ "$1" = "stop" ]; then
    function_stop_mysql
elif [ "$1" = "restart" ]; then
function_restart_mysql
elif [ "$1" = "kill" ]; then
function_kill_mysql
else
    printf "Usage: /data0/mysql/${mysql_port}/mysql {start|stop|restart|kill}\n"
fi


2.5赋予shell脚本可执行权限： 

chmod +x /data0/mysql/3306/mysql


2.6启动MySQL： 

/data0/mysql/3306/mysql start

2.7通过命令行登录管理MySQL服务器（提示输入密码时直接回车）： 

/usr/local/webserver/mysql/bin/mysql -u root -p -S /tmp/mysql.sock

2.8输入以下SQL语句，创建一个具有root权限的用户（admin）和密码（12345678）： 


GRANT ALL PRIVILEGES ON *.* TO 'admin'@'localhost' IDENTIFIED BY '12345678';
GRANT ALL PRIVILEGES ON *.* TO 'admin'@'127.0.0.1' IDENTIFIED BY '12345678';
3 编译安装PHP（FastCGI模式） 



tar zxvf php-5.2.14.tar.gz
gzip -cd php-5.2.14-fpm-0.5.14.diff.gz | patch -d php-5.2.14 -p1
cd php-5.2.14/
./configure --prefix=/usr/local/webserver/php --with-config-file-path=/usr/local/webserver/php/etc --with-mysql=/usr/local/webserver/mysql --with-mysqli=/usr/local/webserver/mysql/bin/mysql_config --with-iconv-dir=/usr/local --with-freetype-dir --with-jpeg-dir --with-png-dir --with-zlib --with-libxml-dir=/usr --enable-xml --disable-rpath --enable-discard-path --enable-safe-mode --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --with-curl --with-curlwrappers --enable-mbregex --enable-fastcgi --enable-fpm --enable-force-cgi-redirect --enable-mbstring --with-mcrypt --with-gd --enable-gd-native-ttf --with-openssl --with-mhash --enable-pcntl --enable-sockets --with-ldap --with-ldap-sasl --with-xmlrpc --enable-zip --enable-soap
make ZEND_EXTRA_LIBS='-liconv'
make install
cp php.ini-dist /usr/local/webserver/php/etc/php.ini
cd ../
这时候如果没安装相应的支持类库会出现错误，解决方法及示例： 
1.错误
.configure: error: Please reinstall the libcurl distribution -
easy.h should be in <curl-dir>/include/curl/

解决方法：
apt-get install curl
apt-get install libcurl3
apt-get install libcurl4-gnutls-dev

2.安装完
apt-get install libpng
apt-get install libjpeg
发现还会报同上的错误，首先查下类库安装的位置
find /. -name libpng.so 
然后软链指向/usr/lib目录下
ln -s /usr/lib/i386-linux-gnu/libpng.so /usr/lib/libpng.so
ln -s /usr/lib/i386-linux-gnu/libjpeg.so /usr/lib/libjpeg.so 

3.
安装类库
apt-get install libfreetype6-dev

apt-get install libsasl2-dev
4.编译安装PHP5扩展模块(这些扩展按需安装) 



tar zxvf memcache-2.2.5.tgz
cd memcache-2.2.5/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../

tar jxvf eaccelerator-0.9.6.1.tar.bz2
cd eaccelerator-0.9.6.1/
/usr/local/webserver/php/bin/phpize
./configure --enable-eaccelerator=shared --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../

tar zxvf PDO_MYSQL-1.0.2.tgz
cd PDO_MYSQL-1.0.2/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config --with-pdo-mysql=/usr/local/webserver/mysql
make
make install
cd ../

tar zxvf ImageMagick.tar.gz
cd ImageMagick-6.5.1-2/
./configure
make
make install
cd ../

tar zxvf imagick-2.3.0.tgz
cd imagick-2.3.0/
/usr/local/webserver/php/bin/phpize
./configure --with-php-config=/usr/local/webserver/php/bin/php-config
make
make install
cd ../

　 　5、修改php.ini文件 
　　查找/usr/local/webserver/php/etc/php.ini中的extension_dir = "./"
　　修改为extension_dir = "/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/"
　　并在此行后增加以下几行，然后保存：
　　extension = "memcache.so"
　　extension = "pdo_mysql.so"
　　extension = "imagick.so"

　　再查找output_buffering = Off
　　修改为output_buffering = On

　　再查找; cgi.fix_pathinfo=0
　　修改为cgi.fix_pathinfo=0，防止Nginx文件类型错误解析漏洞

6.配置eAccelerator加速PHP： 


mkdir -p /usr/local/webserver/eaccelerator_cache
vi /usr/local/webserver/php/etc/php.ini
按shift+g键跳到配置文件的最末尾，加上以下配置信息：
[eaccelerator]
zend_extension="/usr/local/webserver/php/lib/php/extensions/no-debug-non-zts-20060613/eaccelerator.so"
eaccelerator.shm_size="64"
eaccelerator.cache_dir="/usr/local/webserver/eaccelerator_cache"
eaccelerator.enable="1"
eaccelerator.optimizer="1"
eaccelerator.check_mtime="1"
eaccelerator.debug="0"
eaccelerator.filter=""
eaccelerator.shm_max="0"
eaccelerator.shm_ttl="3600"
eaccelerator.shm_prune_period="3600"
eaccelerator.shm_only="0"
eaccelerator.compress="1"
eaccelerator.compress_level="9"

　8、创建php-fpm配置文件（php-fpm是为PHP打的一个FastCGI管理补丁，可以平滑变更php.ini配置而无需重启php-cgi）： 


在/usr/local/webserver/php/etc/目录中创建php-fpm.conf文件：
rm -f /usr/local/webserver/php/etc/php-fpm.conf
vi /usr/local/webserver/php/etc/php-fpm.conf
输入以下内容（如果您安装 Nginx + PHP 用于程序调试，请将以下的
<value name="display_errors">0</value>改为<value name="display_errors">1</value>，
以便显示PHP错误信息，否则，Nginx 会报状态为500的空白错误页）：
<?xml version="1.0" ?>
<configuration>

  All relative paths in this config are relative to php's install prefix

  <section name="global_options">

    Pid file
    <value name="pid_file">/usr/local/webserver/php/logs/php-fpm.pid</value>

    Error log file
    <value name="error_log">/usr/local/webserver/php/logs/php-fpm.log</value>

    Log level
    <value name="log_level">notice</value>

    When this amount of php processes exited with SIGSEGV or SIGBUS ...
    <value name="emergency_restart_threshold">10</value>

    ... in a less than this interval of time, a graceful restart will be initiated.
    Useful to work around accidental curruptions in accelerator's shared memory.
    <value name="emergency_restart_interval">1m</value>

    Time limit on waiting child's reaction on signals from master
    <value name="process_control_timeout">5s</value>

    Set to 'no' to debug fpm
    <value name="daemonize">yes</value>

  </section>

  <workers>

    <section name="pool">

      Name of pool. Used in logs and stats.
      <value name="name">default</value>

      Address to accept fastcgi requests on.
      Valid syntax is 'ip.ad.re.ss:port' or just 'port' or '/path/to/unix/socket'
      <value name="listen_address">127.0.0.1:9000</value>

      <value name="listen_options">

        Set listen(2) backlog
        <value name="backlog">-1</value>

        Set permissions for unix socket, if one used.
        In Linux read/write permissions must be set in order to allow connections from web server.
        Many BSD-derrived systems allow connections regardless of permissions.
        <value name="owner"></value>
        <value name="group"></value>
        <value name="mode">0666</value>
      </value>

      Additional php.ini defines, specific to this pool of workers.
      <value name="php_defines">
        <value name="sendmail_path">/usr/sbin/sendmail -t -i</value>
        <value name="display_errors">0</value>
      </value>

      Unix user of processes
      <value name="user">www</value>

      Unix group of processes
      <value name="group">www</value>

      Process manager settings
      <value name="pm">

        Sets style of controling worker process count.
        Valid values are 'static' and 'apache-like'
        <value name="style">static</value>

        Sets the limit on the number of simultaneous requests that will be served.
        Equivalent to Apache MaxClients directive.
        Equivalent to PHP_FCGI_CHILDREN environment in original php.fcgi
        Used with any pm_style.
        <value name="max_children">128</value>

        Settings group for 'apache-like' pm style
        <value name="apache_like">

          Sets the number of server processes created on startup.
          Used only when 'apache-like' pm_style is selected
          <value name="StartServers">20</value>

          Sets the desired minimum number of idle server processes.
          Used only when 'apache-like' pm_style is selected
          <value name="MinSpareServers">5</value>

          Sets the desired maximum number of idle server processes.
          Used only when 'apache-like' pm_style is selected
          <value name="MaxSpareServers">35</value>

        </value>

      </value>

      The timeout (in seconds) for serving a single request after which the worker process will be terminated
      Should be used when 'max_execution_time' ini option does not stop script execution for some reason
      '0s' means 'off'
      <value name="request_terminate_timeout">0s</value>

      The timeout (in seconds) for serving of single request after which a php backtrace will be dumped to slow.log file
      '0s' means 'off'
      <value name="request_slowlog_timeout">0s</value>

      The log file for slow requests
      <value name="slowlog">logs/slow.log</value>

      Set open file desc rlimit
      <value name="rlimit_files">65535</value>

      Set max core size rlimit
      <value name="rlimit_core">0</value>

      Chroot to this directory at the start, absolute path
      <value name="chroot"></value>

      Chdir to this directory at the start, absolute path
      <value name="chdir"></value>

      Redirect workers' stdout and stderr into main error log.
      If not set, they will be redirected to /dev/null, according to FastCGI specs
      <value name="catch_workers_output">yes</value>

      How much requests each process should execute before respawn.
      Useful to work around memory leaks in 3rd party libraries.
      For endless request processing please specify 0
      Equivalent to PHP_FCGI_MAX_REQUESTS
      <value name="max_requests">1024</value>

      Comma separated list of ipv4 addresses of FastCGI clients that allowed to connect.
      Equivalent to FCGI_WEB_SERVER_ADDRS environment in original php.fcgi (5.2.2+)
      Makes sense only with AF_INET listening socket.
      <value name="allowed_clients">127.0.0.1</value>

      Pass environment variables like LD_LIBRARY_PATH
      All $VARIABLEs are taken from current environment
      <value name="environment">
        <value name="HOSTNAME">$HOSTNAME</value>
        <value name="PATH">/usr/local/bin:/usr/bin:/bin</value>
        <value name="TMP">/tmp</value>
        <value name="TMPDIR">/tmp</value>
        <value name="TEMP">/tmp</value>
        <value name="OSTYPE">$OSTYPE</value>
        <value name="MACHTYPE">$MACHTYPE</value>
        <value name="MALLOC_CHECK_">2</value>
      </value>

    </section>

  </workers>

</configuration>
9、启动php-cgi进程，监听127.0.0.1的9000端口，进程数为128（如果服务器内存小于3GB，可以只开启64个进程，我虚拟机开了32个），用户为www： 
ulimit -SHn 65535
/usr/local/webserver/php/sbin/php-fpm start
注：/usr/local/webserver/php/sbin/php-fpm还有其他参数，包 括：start|stop|quit|restart|reload|logrotate，修改php.ini后不重启php-cgi，重新加载配置文件 使用reload。


三.安装Nginx 0.8.46

1、安装Nginx所需的pcre库： 


tar zxvf pcre-8.10.tar.gz
cd pcre-8.10/
./configure
make && make install
cd ../
2、安装Nginx 



tar zxvf nginx-0.8.46.tar.gz
cd nginx-0.8.46/
./configure --user=www --group=www --prefix=/usr/local/webserver/nginx --with-http_stub_status_module --with-http_ssl_module
make && make install
cd ../
3、创建Nginx日志目录 



mkdir -p /data1/logs
chmod +w /data1/logs
chown -R www:www /data1/logs
4、创建Nginx配置文件


1.在/usr/local/webserver/nginx/conf/目录中创建nginx.conf文件： 

rm -f /usr/local/webserver/nginx/conf/nginx.conf
vi /usr/local/webserver/nginx/conf/nginx.conf



user  www www;

worker_processes 8;

error_log  /data1/logs/nginx_error.log  crit;

pid        /usr/local/webserver/nginx/nginx.pid;

#Specifies the value for maximum file descriptors that can be opened by this process.
worker_rlimit_nofile 65535;

events
{
  use epoll;
  worker_connections 65535;
}

http
{
  include       mime.types;
  default_type  application/octet-stream;

  #charset  gb2312;
      
  server_names_hash_bucket_size 128;
  client_header_buffer_size 32k;
  large_client_header_buffers 4 32k;
  client_max_body_size 8m;
      
  sendfile on;
  tcp_nopush     on;

  keepalive_timeout 60;

  tcp_nodelay on;

  fastcgi_connect_timeout 300;
  fastcgi_send_timeout 300;
  fastcgi_read_timeout 300;
  fastcgi_buffer_size 64k;
  fastcgi_buffers 4 64k;
  fastcgi_busy_buffers_size 128k;
  fastcgi_temp_file_write_size 128k;

  gzip on;
  gzip_min_length  1k;
  gzip_buffers     4 16k;
  gzip_http_version 1.0;
  gzip_comp_level 2;
  gzip_types       text/plain application/x-javascript text/css application/xml;
  gzip_vary on;

  #limit_zone  crawler  $binary_remote_addr  10m;

  server
  {
    listen       80;
    server_name  blog.s135.com;
    index index.html index.htm index.php;
    root  /data0/htdocs/blog;

    #limit_conn   crawler  20;    
                            
    location ~ .*\.(php|php5)?$
    {      
      #fastcgi_pass  unix:/tmp/php-cgi.sock;
      fastcgi_pass  127.0.0.1:9000;
      fastcgi_index index.php;
      include fcgi.conf;
    }
    
    location ~ .*\.(gif|jpg|jpeg|png|bmp|swf)$
    {
      expires      30d;
    }

    location ~ .*\.(js|css)?$
    {
      expires      1h;
    }    

    log_format  access  '$remote_addr - $remote_user [$time_local] "$request" '
              '$status $body_bytes_sent "$http_referer" '
              '"$http_user_agent" $http_x_forwarded_for';
    access_log  /data1/logs/access.log  access;
      }

  server
  {
    listen       80;
    server_name  www.s135.com;
    index index.html index.htm index.php;
    root  /data0/htdocs/www;

    location ~ .*\.(php|php5)?$
    {      
      #fastcgi_pass  unix:/tmp/php-cgi.sock;
      fastcgi_pass  127.0.0.1:9000;
      fastcgi_index index.php;
      include fcgi.conf;
    }

    log_format  wwwlogs  '$remote_addr - $remote_user [$time_local] "$request" '
               '$status $body_bytes_sent "$http_referer" '
               '"$http_user_agent" $http_x_forwarded_for';
    access_log  /data1/logs/wwwlogs.log  wwwlogs;
  }

  server
  {
    listen  80;
    server_name  status.blog.s135.com;

    location / {
    stub_status on;
    access_log   off;
    }
  }
}
2.在/usr/local/webserver/nginx/conf/目录中创建fcgi.conf文件： 
vi /usr/local/webserver/nginx/conf/fcgi.conf

fastcgi_param  GATEWAY_INTERFACE  CGI/1.1;
fastcgi_param  SERVER_SOFTWARE    nginx;

fastcgi_param  QUERY_STRING       $query_string;
fastcgi_param  REQUEST_METHOD     $request_method;
fastcgi_param  CONTENT_TYPE       $content_type;
fastcgi_param  CONTENT_LENGTH     $content_length;

fastcgi_param  SCRIPT_FILENAME    $document_root$fastcgi_script_name;
fastcgi_param  SCRIPT_NAME        $fastcgi_script_name;
fastcgi_param  REQUEST_URI        $request_uri;
fastcgi_param  DOCUMENT_URI       $document_uri;
fastcgi_param  DOCUMENT_ROOT      $document_root;
fastcgi_param  SERVER_PROTOCOL    $server_protocol;

fastcgi_param  REMOTE_ADDR        $remote_addr;
fastcgi_param  REMOTE_PORT        $remote_port;
fastcgi_param  SERVER_ADDR        $server_addr;
fastcgi_param  SERVER_PORT        $server_port;
fastcgi_param  SERVER_NAME        $server_name;

# PHP only, required if PHP was built with --enable-force-cgi-redirect
fastcgi_param  REDIRECT_STATUS    200;
四、配置开机自动启动Nginx + PHP 



vi /etc/rc.local
在末尾增加以下内容：
ulimit -SHn 65535
/usr/local/webserver/php/sbin/php-fpm start
/usr/local/webserver/nginx/sbin/nginx
#如果需要的话运行mysql的话
/data0/mysql/3306/mysql start
五. 在不停止Nginx服务的情况下平滑变更Nginx配置


1、修改/usr/local/webserver/nginx/conf/nginx.conf配置文件后，请执行以下命令检查配置文件是否正确： 

/usr/local/webserver/nginx/sbin/nginx -t


如果屏幕显示以下两行信息，说明配置文件正确：
the configuration file /usr/local/webserver/nginx/conf/nginx.conf syntax is ok
the configuration file /usr/local/webserver/nginx/conf/nginx.conf was tested successfully
2、平滑重启： 
对于Nginx 0.8.x及其以后的版本，平滑重启Nginx配置非常简单，执行以下命令即可：
/usr/local/webserver/nginx/sbin/nginx -s reload


参考文章：

http://blog.s135.com/nginx_php_v6/7/1/

http://forum.ubuntu.com.cn/viewtopic.php?f=88&t=231159

http://blog.csdn.net/xiaotengyi2012/article/details/7440906

http://crazylinux.blog.51cto.com/259244/912939





转载于:https://my.oschina.net/wojibuzhu/blog/113253

weixin_33682719
关注
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值