【树莓派】树莓派使用4G模块上网

一、4G Luci配置

1、 新建一个wwan接口；

2、 上网方式为dhcp自动获取；

3、 物理设置选择wwan0；

4、 防火墙选择wan

二、重连脚本redial4g

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

LogFile=/root/4g_Log.log mdate=`date +%R-%d-%m-%Y`   if  [ -e / var /run/udhcpc-wwan0.pid ]; then      echo 4G pid  is  ok!         #echo $mdate 4G pid is ok! >> $LogFile      #exit 0 else      echo 4G pid  is  failed!      echo $mdate 4G pid  is  failed! >> $LogFile      #/etc/myLte/dial4g      #reboot      #exit 0 fi   if  ping -c3 www.baidu.com > /dev/ null  2>&1 then      echo ping baidu  is  ok!      #echo $mdate  ping baidu is ok! >> $LogFile      echo 0 > /tmp/4g_tmp.txt      exit 0 else      echo ping baidu  is  failed!      echo $mdate ping baidu  is  failed! >> $LogFile      /etc/myLte/dial4g  #must place here      #read pvar < /tmp/4g_temp.txt      #if [ -z "$pvar" ] ; then      #    pvar=0      #fi         if  [ ! -f  "/tmp/4g_tmp.txt"  ] ; then          pvar=0          echo file not exist      else          read pvar < /tmp/4g_tmp.txt          echo file exist      fi      pvar=`expr $pvar + 1`      echo $pvar > /tmp/4g_tmp.txt      if  [ $pvar -ge 5 ] ; then          echo failed 5 times!          echo $mdate failed 5 times! >> $LogFile          reboot         fi       fi exit 0

　　

三、crontab

*/2 * * * * /etc/myLte/redial4g

重连时间不要设太短，太短可能还没拨号结束就又进行重播，会重复了。

四、拨号脚本dial4g

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

PORT=/dev/ttyUSB0 MODE= "AT+CFUN=1"  gcom -d $PORT -s /etc/gcom/setmode.gcom sleep 3 MODE= "AT+COPS=0"  gcom -d $PORT -s /etc/gcom/setmode.gcom sleep 3 MODE= "AT+CEREG=1"  gcom -d $PORT -s /etc/gcom/setmode.gcom sleep 3 MODE= "AT+CGDCONT=1,'IP'"  gcom -d $PORT -s /etc/gcom/setmode.gcom sleep 3 MODE= "AT+CGACT=1,1"  gcom -d $PORT -s /etc/gcom/setmode.gcom sleep 3 MODE= "AT+ZGACT=1,1"  gcom -d $PORT -s /etc/gcom/setmode.gcom sleep 3 ifup wwan & exit 0

　　

五、开机启动

1 2 3 4 5 6

# Put your custom commands here that should be executed once # the system init finished. By default this file does nothing.   /etc/myLte/dial4g   exit 0