利用keepalived实现高可靠（HA）

2019独角兽企业重金招聘Python工程师标准>>>

#利用keepalived实现高可靠（HA） ##1.高可靠概念 HA(High Available), 高可用性集群，是保证业务连续性的有效解决方案，一般有两个或两个以上的节点，且分为活动节点及备用节点。

##2.高可靠软件keepalived keepalive是一款可以实现高可靠的软件，通常部署在2台服务器上，分为一主一备。Keepalived可以对本机上的进程进行检测，一旦Master检测出某个进程出现问题，将自己切换成Backup状态，然后通知另外一个节点切换成Master状态。 ##3.keepalived安装 下载keepalived官网:http://keepalived.org

将keepalived解压到/usr/local/src目录下
tar -zxvf keepalived-1.2.19.tar.gz -C /usr/local/src

进入到/usr/local/src/keepalived-1.2.19目录
cd /usr/local/src/keepalived-1.2.19

开始configure
./configure --prefix=/usr/local/keepalived

#编译并安装 make && make install

##4.将keepalived添加到系统服务中 拷贝执行文件
cp /usr/local/keepalived/sbin/keepalived /usr/sbin/
将init.d文件拷贝到etc下,加入开机启动项
cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/keepalived
将keepalived文件拷贝到etc下
cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/
创建keepalived文件夹
mkdir -p /etc/keepalived
将keepalived配置文件拷贝到etc下
cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/keepalived.conf
添加可执行权限
chmod +x /etc/init.d/keepalived

###以上所有命令一次性执行： cp /usr/local/keepalived/sbin/keepalived /usr/sbin/
cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/keepalived
cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/
mkdir -p /etc/keepalived
cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/keepalived.conf
chmod +x /etc/init.d/keepalived
chkconfig --add keepalived
chkconfig keepalived on

###添加keepalived到开机启动 chkconfig --add keepalived
chkconfig keepalived on

##5.配置keepalived虚拟IP 修改配置文件： /etc/keepalived/keepalived.conf ###MASTER节点 global_defs { } vrrp_instance VI_1 { state MASTER #指定A节点为主节点 备用节点上设置为BACKUP即可 interface eth0 #绑定虚拟IP的网络接口 virtual_router_id 51 #VRRP组名，两个节点的设置必须一样，以指明各个节点属于同一VRRP组 priority 100 #主节点的优先级（1-254之间），备用节点必须比主节点优先级低 advert_int 1 #组播信息发送间隔，两个节点设置必须一样 authentication { #设置验证信息，两个节点必须一致 auth_type PASS auth_pass 1111 } virtual_ipaddress { #指定虚拟IP, 两个节点设置必须一样 192.168.33.60/24 #如果两个nginx的ip分别是192.168.33.61,,...62，则此处的虚拟ip跟它俩同一个网段即可 } }

###BACKUP节点 global_defs { } vrrp_instance VI_1 { state BACKUP interface eth0 virtual_router_id 51 priority 99 advert_int 1 authentication { auth_type PASS auth_pass 1111 } virtual_ipaddress { 192.168.33.60/24 } }

#给主节点keepalived的eth0增加一个ip ip addr add 192.168.33.60 dev eth0; #分别启动两台机器上的keepalived service keepalived start ###测试： 杀掉master上的keepalived进程，你会发现，在slave机器上的eth0网卡多了一个ip地址
查看ip地址的命令： ip addr

##6.配置keepalived心跳检查 原理： Keepalived并不跟nginx耦合，它俩完全不是一家人
但是keepalived提供一个机制：让用户自定义一个shell脚本去检测用户自己的程序，返回状态给keepalived就可以了

###MASTER节点 global_defs { }

vrrp_script chk_health {
    script "[[ `ps -ef | grep nginx | grep -v grep | wc -l` -ge 2 ]] && exit 0 || exit 1"
    interval 1    #每隔1秒执行上述的脚本，去检查用户的程序ngnix
    weight -2
}

vrrp_instance VI_1 {
    state MASTER
    interface eth0
    virtual_router_id 1
    priority 100
    advert_int 2
    authentication {
        auth_type PASS
        auth_pass 1111
    }

    track_script {
        chk_health
    }

    virtual_ipaddress {
        10.0.0.10/24
    }

    notify_master "/usr/local/keepalived/sbin/notify.sh master"
    notify_backup "/usr/local/keepalived/sbin/notify.sh backup"
    notify_fault "/usr/local/keepalived/sbin/notify.sh fault"
}

###添加切换通知脚本 vi /usr/local/keepalived/sbin/notify.sh #!/bin/bash

case "$1" in
    master)
        /usr/local/nginx/sbin/nginx
        exit 0
    ;;
backup)
        /usr/local/nginx/sbin/nginx -s stop
        /usr/local/nginx/sbin/nginx
        exit 0
    ;;
    fault)
        /usr/local/nginx/sbin/nginx -s stop
        exit 0
    ;;
    *)
        echo 'Usage: notify.sh {master|backup|fault}'
        exit 1
    ;;
esac

###添加执行权限 chmod +x /usr/local/keepalived/sbin/notify.sh global_defs { }

vrrp_script chk_health {
    script "[[ `ps -ef | grep nginx | grep -v grep | wc -l` -ge 2 ]] && exit 0 || exit 1"
    interval 1
    weight -2
}

vrrp_instance VI_1 {
    state BACKUP
    interface eth0
    virtual_router_id 1
    priority 99
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }

    track_script {
        chk_health
    }

    virtual_ipaddress {
        10.0.0.10/24
    }
	
    notify_master "/usr/local/keepalived/sbin/notify.sh master"
    notify_backup "/usr/local/keepalived/sbin/notify.sh backup"
    notify_fault "/usr/local/keepalived/sbin/notify.sh fault"
}

###在第二台机器上添加notify.sh脚本 ###分别在两台机器上启动keepalived service keepalived start chkconfig keepalived on

需要大数据视频资料的同学可以加QQ群：105067810向群主索取。

转载于:https://my.oschina.net/zhanggong/blog/851663