五．实现×××
通过网上的资料查证可得，如果在双线路策略的LINUX代理服务器上实现×××，那么INTERNET中的其他单一线路的机子通过×××可以实现双线路，类似与统一网关的功能。所以这一句就是为了实现×××。
查看是否安装PPTPD软件包，如果没有，需要从网上下载并安装。
[root@xxpostnet ~]# rpm -q pptpd
pptpd-1.3.3-1.rhel4
对系统文件进行配置，其中需要修改默认配置的地方都加粗了字体。
[root@xxpostnet etc]# vi pptpd.conf
###########################################################################
# $Id: pptpd.conf,v 1.10 2006/09/04 23:30:57 quozl Exp $
#
# Sample Poptop configuration file /etc/pptpd.conf
#                                                               
# Changes are effective when pptpd is restarted.
###########################################################################
 
# TAG: ppp
#       Path to the pppd program, default '/usr/sbin/pppd' on Linux
#
#ppp /usr/sbin/pppd
 
# TAG: option
#       Specifies the location of the PPP options file.
#       By default PPP looks in '/etc/ppp/options'
#
option /etc/ppp/options.pptpd
 
# TAG: debug
#       Turns on (more) debugging to syslog
#
#debug                               
# TAG: stimeout
#       Specifies timeout (in seconds) on starting ctrl connection
#
# stimeout 10
 
# TAG: noipparam
#       Suppress the passing of the client's IP address to PPP, which is
#       done by default otherwise.
#
#noipparam
 
# TAG: logwtmp
#       Use wtmp(5) to record client connections and disconnections.
#
logwtmp
 
# TAG: bcrelay <if>
#       Turns on broadcast relay to clients from interface <if>
#
#bcrelay eth1
 
# TAG: delegate
#       Delegates the allocation of client IP addresses to pppd.
#
#       Without this option, which is the default, pptpd manages the list of
#       IP addresses for clients and passes the next free address to pppd.
#       With this option, pptpd does not pass an address, and so pppd may use
#       radius or chap-secrets to allocate an address.
#
#delegate
 
# TAG: connections
#       Limits the number of client connections that may be accepted.
#
#       If pptpd is allocating IP addresses (e.g. delegate is not
#       used) then the number of connections is also limited by the
#       remoteip option.  The default is 100.
#connections 100
 
# TAG: localip
# TAG: remoteip
#       Specifies the local and remote IP address ranges.
#
#       These options are ignored if delegate option is set.
#
#       Any addresses work as long as the local machine takes care of the
#       routing.  But if you want to use MS-Windows networking, you should
#       use IP addresses out of the LAN address space and use the proxyarp
#       option in the pppd options file, or run bcrelay.
#
#       You can specify single IP addresses seperated by commas or you can
#       specify ranges, or both. For example:
#
#               192.168.0.234,192.168.0.245-249,192.168.0.254
#
#       IMPORTANT RESTRICTIONS:
#
#       1. No spaces are permitted between commas or within addresses.
#
#       2. If you give more IP addresses than the value of connections,
#          it will start at the beginning of the list and go until it
#          gets connections IPs.  Others will be ignored.
#
#       3. No shortcuts in ranges! ie. 234-8 does not mean 234 to 238,
#          you must type 234-238 if you mean this.
#
#       4. If you give a single localIP, that's ok - all local IPs will
#          be set to the given one. You MUST still give at least one remote
#          IP for each simultaneous client.
#
# (Recommended)
localip 192.168.0.1
remoteip 192.168.0.220-238
netmask 255.255.255.0
# or
#localip 192.168.0.234-238,192.168.0.245
#remoteip 192.168.1.234-238,192.168.1.245
 
[root@xxpostnet etc]# vi ppp/options.pptpd
###########################################################################
# $Id: options.pptpd,v 1.11 2005/12/29 01:21:09 quozl Exp $
#
# Sample Poptop PPP options file /etc/ppp/options.pptpd
# Options used by PPP when a connection arrives from a client.
# This file is pointed to by /etc/pptpd.conf option keyword.
# Changes are effective on the next connection.  See "man pppd".
#
# You are expected to change this file to suit your system.  As
# packaged, it requires PPP 2.4.2 and the kernel MPPE module.
###########################################################################
 
 
# Authentication
 
# Name of the local system for authentication purposes
# (must match the second field in /etc/ppp/chap-secrets entries)
name pptpd
 
# Strip the domain prefix from the username before authentication.
# (applies if you use pppd with chapms-strip-domain patch)
#chapms-strip-domain
 
# Encryption
# (There have been multiple versions of PPP with encryption support,
# choose with of the following sections you will use.)
 
 
# BSD licensed ppp-2.4.2 upstream with MPPE only, kernel module ppp_mppe.o
# {{{
refuse-pap
refuse-chap
refuse-mschap
# Require the peer to authenticate itself using MS-CHAPv2 [Microsoft
# Challenge Handshake Authentication Protocol, Version 2] authentication.
require-mschap-v2
# Require MPPE 128-bit encryption
# (note that MPPE requires the use of MSCHAP-V2 during authentication)
require-mppe-128
# }}}
 
 
# OpenSSL licensed ppp-2.4.1 fork with MPPE only, kernel module mppe.o
# {{{
-chap
#-chapms
# Require the peer to authenticate itself using MS-CHAPv2 [Microsoft
# Challenge Handshake Authentication Protocol, Version 2] authentication.
#+chapms-v2
# Require MPPE encryption
# (note that MPPE requires the use of MSCHAP-V2 during authentication)
#mppe-40        # enable either 40-bit or 128-bit, not both
#mppe-128
#mppe-stateless
# }}}
 
 
# Network and Routing
auth
# If pppd is acting as a server for Microsoft Windows clients, this
# option allows pppd to supply one or two DNS (Domain Name Server)
# addresses to the clients.  The first instance of this option
# specifies the primary DNS address; the second instance (if given)
# specifies the secondary DNS address.//设置DNS
ms-dns 219.150.150.150
ms-dns 202.102.224.68
ms-dns 202.102.227.68
 
# If pppd is acting as a server for Microsoft Windows or "Samba"
# clients, this option allows pppd to supply one or two WINS (Windows
# Internet Name Services) server addresses to the clients.  The first
# instance of this option specifies the primary WINS address; the
# second instance (if given) specifies the secondary WINS address.
#ms-wins 10.0.0.3
#ms-wins 10.0.0.4
 
# Add an entry to this system's ARP [Address Resolution Protocol]
# table with the IP address of the peer and the Ethernet address of this
# system.  This will have the effect of making the peer appear to other
# systems to be on the local ethernet.
# (you do not need this if your PPTP server is responsible for routing
# packets to the clients -- James Cameron)
proxyarp
 
# Normally pptpd passes the IP address to pppd, but if pptpd has been
# given the delegate option in pptpd.conf or the --delegate command line
# option, then pppd will use chap-secrets or radius to allocate the
# client IP address.  The default local IP address used at the server
# end is often the same as the address of the server.  To override this,
# specify the local IP address here.
# (you must not use this unless you have used the delegate option)
#10.8.0.100
 
 
# Logging
logfile /var/log/pptpd.log
# Enable connection debugging facilities.
# (see your syslog configuration for where pppd sends to)
debug
 
# Print out all the option values which have been set.
# (often requested by mailing list to verify options)
#dump
 
 
# Miscellaneous
 
# Create a UUCP-style lock file for the pseudo-tty to ensure exclusive
# access.
lock
 
# Disable BSD-Compress compression
nobsdcomp
 
# Disable Van Jacobson compression
# (needed on some networks with Windows 9x/ME/XP clients, see posting to
# poptop-server on 14th April 2005 by Pawel Pokrywka and followups,
# [url]http://marc.theaimsgroup.com/?t=111343175400006&r=1&w=2[/url] )
novj
novjccomp
 
# turn off logging to stderr, since this may be redirected to pptpd,
# which may trigger a loopback
nologfd
 
# put plugins here
# (putting them higher up may cause them to sent messages to the pty)
 
[root@xxpostnet etc]# vi ppp/chap-secrets   //这是定义客户端密码的配置
# Secrets for authentication using CHAP
# client        server  secret                  IP addresses
  "xxpost***1" * "xxpost***1#"            192.168.106.220
  "xxpost***2" * "xxpost***2#"            192.168.106.221
  "xxpost***3" * "xxpost***3#"            192.168.106.222
  "xxpost***4" * "xxpost***4#"            192.168.106.223
  "xxpost***5" * "xxpost***5#"            192.168.106.224
  "xxpost***6" * "xxpost***6#"            192.168.106.225
  "xxpost***7" * "xxpost***7#"            192.168.106.226
  "xxpost***8" * "xxpost***8#"            192.168.106.227
  "xxpost***9" * "xxpost***9#"            192.168.106.228
  "xxpost***10" * "xxpost***10#"          192.168.106.229
  "xxpost***11" * "xxpost***11#"          192.168.106.230
  "xxpost***12" * "xxpost***12#"          192.168.106.231
  "xxpost***13" * "xxpost***13#"          192.168.106.232
  "xxpost***14" * "xxpost***14#"          192.168.106.233
  "xxpost***15" * "xxpost***15#"          192.168.106.234
  "xxpost***16" * "xxpost***16#"          192.168.106.235
  "xxpost***17" * "xxpost***17#"          192.168.106.236
####### redhat-config-network will overwrite this part!!! (begin) ##########
####### redhat-config-network will overwrite this part!!! (end) ############
启动PPTPD服务
/etc/rc.d/init.d/pptpd start
到此LINUX服务器上关于PPTPD的配置也就完成了。