spring集成p6spy打印真正的执行sql

2019独角兽企业重金招聘Python工程师标准>>>

前言：ssm框架集成的log4j打印的sql日志信息时，sql语句中总是出现？ 这种预编译sql的符号。而有时候sql过长，参数过多的情况下，查看完整sql以及拷贝sql入工具执行的情况下，比较麻烦。所以这里我使用集成p6spy打印完整sql方案解决这种问题。

1。准备p6spy的jar包

<dependency>
  <groupId>p6spy</groupId>
  <artifactId>p6spy</artifactId>
  <version>3.0.0</version>
</dependency>

2。在spring中配置数据源代理

<!-- p6spy sql dynamicDataSources:数据源或者是动态代理数据源-->
    <bean id="dynamicDataSource" class="com.p6spy.engine.spy.P6DataSource">
    	<constructor-arg>
    		<ref bean="dynamicDataSources"/>
    	</constructor-arg>
    </bean>

3。新建一个spy.properties文件

###
# #%L
# P6Spy
# %%
# Copyright (C) 2013 P6Spy
# %%
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# 
#      http://www.apache.org/licenses/LICENSE-2.0
# 
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# #L%
###

#################################################################
# P6Spy Options File                                            #
# See documentation for detailed instructions                   #
# http://p6spy.github.io/p6spy/2.0/configandusage.html          #
#################################################################

#################################################################
# MODULES                                                       #
#                                                               #
# Module list adapts the modular functionality of P6Spy.		#
# Only modules listed are active.						        #
# (default is com.p6spy.engine.logging.P6LogFactory and         #
# com.p6spy.engine.spy.P6SpyFactory)                            #
# Please note that the core module (P6SpyFactory) can't be		# 
# deactivated. 													#
# Unlike the other properties, activation of the changes on     #
# this one requires reload.										#
#################################################################
#modulelist=com.p6spy.engine.spy.P6SpyFactory,com.p6spy.engine.logging.P6LogFactory,com.p6spy.engine.outage.P6OutageFactory

################################################################
# CORE (P6SPY) PROPERTIES                                      #
################################################################

# A comma separated list of JDBC drivers to load and register.
# (default is empty)
#
# Note: This is normally only needed when using P6Spy in an
# application server environment with a JNDI data source or when
# using a JDBC driver that does not implement the JDBC 4.0 API
# (specifically automatic registration).
#driverlist=
#驱动可以指定多个
driverlist=oracle.jdbc.driver.OracleDriver

# for flushing per statement
# (default is false)
#autoflush = false

# sets the date format using Java's SimpleDateFormat routine. 
# In case property is not set, miliseconds since 1.1.1970 (unix time) is used (default is empty)
#dateformat=

# prints a stack trace for every statement logged
#stacktrace=false
# if stacktrace=true, specifies the stack trace to print
#stacktraceclass=

# determines if property file should be reloaded
# Please note: reload means forgetting all the previously set
# settings (even those set during runtime - via JMX)
# and starting with the clean table 
# (default is false)
#reloadproperties=false
reloadproperties=true

# determines how often should be reloaded in seconds
# (default is 60)
#reloadpropertiesinterval=60

# specifies the appender to use for logging
# Please note: reload means forgetting all the previously set
# settings (even those set during runtime - via JMX)
# and starting with the clean table 
# (only the properties read from the configuration file)
# (default is com.p6spy.engine.spy.appender.FileLogger)
#appender=com.p6spy.engine.spy.appender.Slf4JLogger
#appender=com.p6spy.engine.spy.appender.StdoutLogger
#appender=com.p6spy.engine.spy.appender.FileLogger
#这里如果出不来可以切换上面几种
appender=com.p6spy.engine.spy.appender.Slf4JLogger

# name of logfile to use, note Windows users should make sure to use forward slashes in their pathname (e:/test/spy.log) 
# (used for com.p6spy.engine.spy.appender.FileLogger only)
# (default is spy.log)
#logfile = spy.log

# append to the p6spy log file. if this is set to false the
# log file is truncated every time. (file logger only)
# (default is true)
#append=true

# class to use for formatting log messages (default is: com.p6spy.engine.spy.appender.SingleLineFormat)
#这里可以自定义格式化输出类
logMessageFormat=com.p6spy.engine.spy.appender.MultiLineFormat
#logMessageFormat=com.casking.ccss.common.config.P6LpyLogger

# format that is used for logging of the date/time/... (has to be compatible with java.text.SimpleDateFormat)
# (default is dd-MMM-yy)
#databaseDialectDateFormat=dd-MMM-yy
databaseDialectDateFormat=yyyy-MM-dd hh:mm:ss

# whether to expose options via JMX or not
# (default is true)
#jmx=true

# if exposing options via jmx (see option: jmx), what should be the prefix used?
# jmx naming pattern constructed is: com.p6spy(.<jmxPrefix>)?:name=<optionsClassName>
# please note, if there is already such a name in use it would be unregistered first (the last registered wins)
# (default is none)
#jmxPrefix=

#################################################################
# DataSource replacement                                        #
#                                                               #
# Replace the real DataSource class in your application server  #
# configuration with the name com.p6spy.engine.spy.P6DataSource #
# (that provides also connection pooling and xa support).       #
# then add the JNDI name and class name of the real             #
# DataSource here                                               #
#                                                               #
# Values set in this item cannot be reloaded using the          #
# reloadproperties variable. Once it is loaded, it remains      #
# in memory until the application is restarted.                 #
#                                                               #
#################################################################
#realdatasource=/RealMySqlDS
#realdatasourceclass=com.mysql.jdbc.jdbc2.optional.MysqlDataSource

#################################################################
# DataSource properties                                         #
#                                                               #
# If you are using the DataSource support to intercept calls    #
# to a DataSource that requires properties for proper setup,    #
# define those properties here. Use name value pairs, separate  #
# the name and value with a semicolon, and separate the         #
# pairs with commas.                                            #
#                                                               #
# The example shown here is for mysql                           #
#                                                               #
#################################################################
#realdatasourceproperties=port;3306,serverName;myhost,databaseName;jbossdb,foo;bar

#################################################################
# JNDI DataSource lookup                                        #
#                                                               #
# If you are using the DataSource support outside of an app     #
# server, you will probably need to define the JNDI Context     #
# environment.                                                  #
#                                                               #
# If the P6Spy code will be executing inside an app server then #
# do not use these properties, and the DataSource lookup will   #
# use the naming context defined by the app server.             #
#                                                               #
# The two standard elements of the naming environment are       #
# jndicontextfactory and jndicontextproviderurl. If you need    #
# additional elements, use the jndicontextcustom property.      #
# You can define multiple properties in jndicontextcustom,      #
# in name value pairs. Separate the name and value with a       #
# semicolon, and separate the pairs with commas.                #
#                                                               #
# The example shown here is for a standalone program running on #
# a machine that is also running JBoss, so the JDNI context     #
# is configured for JBoss (3.0.4).                              #
#                                                               #
# (by default all these are empty)                              #
#################################################################
#jndicontextfactory=org.jnp.interfaces.NamingContextFactory
#jndicontextproviderurl=localhost:1099
#jndicontextcustom=java.naming.factory.url.pkgs;org.jboss.nameing:org.jnp.interfaces

#jndicontextfactory=com.ibm.websphere.naming.WsnInitialContextFactory
#jndicontextproviderurl=iiop://localhost:900

################################################################
# P6 LOGGING SPECIFIC PROPERTIES                               #
################################################################

# filter what is logged
# please note this is a precondition for usage of: include/exclude/sqlexpression
# (default is false)
#filter=false

# comma separated list of strings to include
# please note that special characters escaping (used in java) has to be done for the provided regular expression
# (default is empty)
#include =
# comma separated list of strings to exclude
# (default is empty)
#exclude =

# sql expression to evaluate if using regex
# please note that special characters escaping (used in java) has to be done for the provided regular expression
# (default is empty)
#sqlexpression = 

#list of categories to exclude: error, info, batch, debug, statement,
#commit, rollback and result are valid values
# (default is info,debug,result,resultset,batch)
#excludecategories=info,debug,result,resultset,batch

# Execution threshold applies to the standard logging of P6Spy.       
# While the standard logging logs out every statement          
# regardless of its execution time, this feature puts a time   
# condition on that logging. Only statements that have taken   
# longer than the time specified (in milliseconds) will be     
# logged. This way it is possible to see only statements that  
# have exceeded some high water mark.                          
# This time is reloadable.                                     
#
# executionThreshold=integer time (milliseconds)
# (default is 0)
#executionThreshold=

################################################################
# P6 OUTAGE SPECIFIC PROPERTIES                                #
################################################################
# Outage Detection
#
# This feature detects long-running statements that may be indicative of
# a database outage problem. If this feature is turned on, it will log any
# statement that surpasses the configurable time boundary during its execution.
# When this feature is enabled, no other statements are logged except the long
# running statements. The interval property is the boundary time set in seconds.
# For example, if this is set to 2, then any statement requiring at least 2
# seconds will be logged. Note that the same statement will continue to be logged
# for as long as it executes. So if the interval is set to 2, and the query takes
# 11 seconds, it will be logged 5 times (at the 2, 4, 6, 8, 10 second intervals).
#
# outagedetection=true|false
# outagedetectioninterval=integer time (seconds)
#
# (default is false)
#outagedetection=false
# (default is 60)
#outagedetectioninterval=30

4。然后在log4j里面加上p6spy的配置

##p6spy
log4j.logger.p6spy=info,spyConsole,spyFile
#配置p6spy的日志不重复打印
log4j.additivity.p6spy=false

#配置p6spy打印输出到控制台并定义其格式
log4j.appender.spyConsole = org.apache.log4j.ConsoleAppender
log4j.appender.spyConsole.Target=System.out
log4j.appender.spyConsole.layout = org.apache.log4j.PatternLayout
log4j.appender.spyConsole.layout.ConversionPattern = %m%n

#配置p6spy打印输出到文件并定义其格式
log4j.appender.spyFile = org.apache.log4j.RollingFileAppender
log4j.appender.spyFile.File = logs/spy/spy.log
log4j.appender.spyFile.MaxFileSize = 10MB
log4j.appender.spyFile.layout = org.apache.log4j.PatternLayout
log4j.appender.spyFile.layout.ConversionPattern = %m%n

5。自定义p6spy格式化输出消息类

public class P6LpyLogger implements MessageFormattingStrategy {
    private SimpleDateFormat format = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss:SSS");

    public String formatMessage(int connectionId, String now, long elapsed, String category, String prepared, String sql) {
        if (!sql.trim().equals("")) {
            return "# " + format.format(new Date()) + " | took " + elapsed + "ms | " + category + " | connection " + connectionId + "\n "
                    + sql + ";";
        }
        return "";
    }
}

 

转载于:https://my.oschina.net/u/3086656/blog/1329763