Android HttpURLConnection源代码分析
之前写过HttpURLConnection与HttpClient的差别及选择。后来又分析了Volley的源代码。
近期又遇到了问题，想在Volley中针对HttpURLConnection加入连接池的功能。開始有点懵了，不知道HttpURLConnection要怎么加连接池。
尽管感觉这是不是必需的，可是心底确拿不出根据。
所以研究下HttpURLConnection的源代码进行分析。
在使用的时候都是通过URL.openConnection()来获取HttpURLConnection对象，然后调用其connect方法进行链接。所以先从URL.penConnection()入手:
/**
* Returns a new connection to the resource referred to by this URL.
*
* @throws IOException if an error occurs while opening the connection.
*/
public URLConnection openConnection() throws IOException {
return streamHandler.openConnection(this);
}接下来就要看一下streamHandler到底是何方神圣？我们搜一下他的赋值，实在setupStreamHandler方法中进行的：
/**
* Sets the receiver's stream handler to one which is appropriate for its
* protocol.
*
* <p>Note that this will overwrite any existing stream handler with the new
* one. Senders must check if the streamHandler is null before calling the
* method if they do not want this behavior (a speed optimization).
*
* @throws MalformedURLException if no reasonable handler is available.
*/
void setupStreamHandler() {
// Check for a cached (previously looked up) handler for
// the requested protocol.
streamHandler = streamHandlers.get(protocol);
if (streamHandler != null) {
return;
}
// If there is a stream handler factory, then attempt to
// use it to create the handler.
if (streamHandlerFactory != null) {
streamHandler = streamHandlerFactory.createURLStreamHandler(protocol);
if (streamHandler != null) {
streamHandlers.put(protocol, streamHandler);
return;
}
}
// Check if there is a list of packages which can provide handlers.
// If so, then walk this list looking for an applicable one.
String packageList = System.getProperty("java.protocol.handler.pkgs");
ClassLoader contextClassLoader = Thread.currentThread().getContextClassLoader();
if (packageList != null && contextClassLoader != null) {
for (String packageName : packageList.split("\\|")) {
String className = packageName + "." + protocol + ".Handler";
try {
Class<?> c = contextClassLoader.loadClass(className);
streamHandler = (URLStreamHandler) c.newInstance();
if (streamHandler != null) {
streamHandlers.put(protocol, streamHandler);
}
return;
} catch (IllegalAccessException ignored) {
} catch (InstantiationException ignored) {
} catch (ClassNotFoundException ignored) {
}
}
}
// Fall back to a built-in stream handler if the user didn't supply one
if (protocol.equals("file")) {
streamHandler = new FileHandler();
} else if (protocol.equals("ftp")) {
streamHandler = new FtpHandler();
} else if (protocol.equals("http")) {
// 推断一下假设是HTTP协议，就会创建HtppHandler。看到这里明确了，原来使用的是okhttp.
try {
String name = "com.android.okhttp.HttpHandler";
streamHandler = (URLStreamHandler) Class.forName(name).newInstance();
} catch (Exception e) {
throw new AssertionError(e);
}
} else if (protocol.equals("https")) {
try {
String name = "com.android.okhttp.HttpsHandler";
streamHandler = (URLStreamHandler) Class.forName(name).newInstance();
} catch (Exception e) {
throw new AssertionError(e);
}
} else if (protocol.equals("jar")) {
streamHandler = new JarHandler();
}
if (streamHandler != null) {
streamHandlers.put(protocol, streamHandler);
}
}这里我们就以HTTP协议为例说一下所以找到okhttp HttpHandler.openConnection()方法:
/*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.squareup.okhttp;
import java.io.IOException;
import java.net.Proxy;
import java.net.URL;
import java.net.URLConnection;
import java.net.URLStreamHandler;
public final class HttpHandler extends URLStreamHandler {
@Override protected URLConnection openConnection(URL url) throws IOException {
// 调用了OKHttpClient()的方法
return new OkHttpClient().open(url);
}
@Override protected URLConnection openConnection(URL url, Proxy proxy) throws IOException {
if (url == null || proxy == null) {
throw new IllegalArgumentException("url == null || proxy == null");
}
return new OkHttpClient().setProxy(proxy).open(url);
}
@Override protected int getDefaultPort() {
return 80;
}
}接下来就悲剧了，由于我找不到OkHttpClient()类中有open方法。
细致查看了文档后发如今OKHttp1.6.0的时候该方法就已经已经过时了。
@Deprecated
public HttpURLConnection open(URL url)
Deprecated. moved to OkUrlFactory.open.那我们怎么往下分析呢？非常显然Android sdk中使用的OkHttp不是最新版。
所以我们能够使用1.5.0版本号的OKHttp接着分析。
在项目build.gradle中进行配置 compile ‘com.squareup.okhttp:okhttp:1.5.0’ 然后開始愉快的查看源代码。
package com.squareup.okhttp;
import com.squareup.okhttp.internal.Util;
import com.squareup.okhttp.internal.http.HttpAuthenticator;
import com.squareup.okhttp.internal.http.HttpURLConnectionImpl;
import com.squareup.okhttp.internal.http.HttpsURLConnectionImpl;
import com.squareup.okhttp.internal.http.ResponseCacheAdapter;
import com.squareup.okhttp.internal.okio.ByteString;
import com.squareup.okhttp.internal.tls.OkHostnameVerifier;
import java.io.IOException;
import java.net.CookieHandler;
import java.net.HttpURLConnection;
import java.net.Proxy;
import java.net.ProxySelector;
import java.net.ResponseCache;
import java.net.URL;
import java.net.URLConnection;
import java.net.URLStreamHandler;
import java.net.URLStreamHandlerFactory;
import java.security.GeneralSecurityException;
import java.util.ArrayList;
import java.util.List;
import java.util.concurrent.TimeUnit;
import javax.net.ssl.HostnameVerifier;
import javax.net.ssl.SSLContext;
import javax.net.ssl.SSLSocketFactory;
/** Configures and creates HTTP connections. */
public final class OkHttpClient implements URLStreamHandlerFactory, Cloneable {
private final RouteDatabase routeDatabase;
private Proxy proxy;
private List<Protocol> protocols;
private ProxySelector proxySelector;
private CookieHandler cookieHandler;
private OkResponseCache responseCache;
private SSLSocketFactory sslSocketFactory;
private HostnameVerifier hostnameVerifier;
private OkAuthenticator authenticator;
private ConnectionPool connectionPool;
private boolean followProtocolRedirects = true;
private int connectTimeout;
private int readTimeout;
public OkHttpClient() {
routeDatabase = new RouteDatabase();
}
/**
* Sets the default connect timeout for new connections. A value of 0 means no timeout.
*
* @see URLConnection#setConnectTimeout(int)
*/
public void setConnectTimeout(long timeout, TimeUnit unit) {
if (timeout < 0) {
throw new IllegalArgumentException("timeout < 0");
}
if (unit == null) {
throw new IllegalArgumentException("unit == null");
}
long millis = unit.toMillis(timeout);
if (millis > Integer.MAX_VALUE) {
throw new IllegalArgumentException("Timeout too large.");
}
connectTimeout = (int) millis;
}
/** Default connect timeout (in milliseconds). */
public int getConnectTimeout() {
return connectTimeout;
}
/**
* Sets the default read timeout for new connections. A value of 0 means no timeout.
*
* @see URLConnection#setReadTimeout(int)
*/
public void setReadTimeout(long timeout, TimeUnit unit) {
if (timeout < 0) {
throw new IllegalArgumentException("timeout < 0");
}
if (unit == null) {
throw new IllegalArgumentException("unit == null");
}
long millis = unit.toMillis(timeout);
if (millis > Integer.MAX_VALUE) {
throw new IllegalArgumentException("Timeout too large.");
}
readTimeout = (int) millis;
}
/** Default read timeout (in milliseconds). */
public int getReadTimeout() {
return readTimeout;
}
/**
* Sets the HTTP proxy that will be used by connections created by this
* client. This takes precedence over {@link #setProxySelector}, which is
* only honored when this proxy is null (which it is by default). To disable
* proxy use completely, call {@code setProxy(Proxy.NO_PROXY)}.
*/
public OkHttpClient setProxy(Proxy proxy) {
this.proxy = proxy;
return this;
}
public Proxy getProxy() {
return proxy;
}
/**
* Sets the proxy selection policy to be used if no {@link #setProxy proxy}
* is specified explicitly. The proxy selector may return multiple proxies;
* in that case they will be tried in sequence until a successful connection
* is established.
*
* <p>If unset, the {@link ProxySelector#getDefault() system-wide default}
* proxy selector will be used.
*/
public OkHttpClient setProxySelector(ProxySelector proxySelector) {
this.proxySelector = proxySelector;
return this;
}
public ProxySelector getProxySelector() {
return proxySelector;
}
/**
* Sets the cookie handler to be used to read outgoing cookies and write
* incoming cookies.
*
* <p>If unset, the {@link CookieHandler#getDefault() system-wide default}
* cookie handler will be used.
*/
public OkHttpClient setCookieHandler(CookieHandler cookieHandler) {
this.cookieHandler = cookieHandler;
return this;
}
public CookieHandler getCookieHandler() {
return cookieHandler;
}
/**
* Sets the response cache to be used to read and write cached responses.
*/
public OkHttpClient setResponseCache(ResponseCache responseCache) {
return setOkResponseCache(toOkResponseCache(responseCache));
}
public ResponseCache getResponseCache() {
return responseCache instanceof ResponseCacheAdapter
? ((ResponseCacheAdapter) responseCache).getDelegate()
: null;
}
public OkHttpClient setOkResponseCache(OkResponseCache responseCache) {
this.responseCache = responseCache;
return this;
}
public OkResponseCache getOkResponseCache() {
return responseCache;
}
/**
* Sets the socket factory used to secure HTTPS connections.
*
* <p>If unset, a lazily created SSL socket factory will be used.
*/
public OkHttpClient setSslSocketFactory(SSLSocketFactory sslSocketFactory) {
this.sslSocketFactory = sslSocketFactory;
return this;
}
public SSLSocketFactory getSslSocketFactory() {
return sslSocketFactory;
}
/**
* Sets the verifier used to confirm that response certificates apply to
* requested hostnames for HTTPS connections.
*
* <p>If unset, the
* {@link javax.net.ssl.HttpsURLConnection#getDefaultHostnameVerifier()
* system-wide default} hostname verifier will be used.
*/
public OkHttpClient setHostnameVerifier(HostnameVerifier hostnameVerifier) {
this.hostnameVerifier = hostnameVerifier;
return this;
}
public HostnameVerifier getHostnameVerifier() {
return hostnameVerifier;
}
/**
* Sets the authenticator used to respond to challenges from the remote web
* server or proxy server.
*
* <p>If unset, the {@link java.net.Authenticator#setDefault system-wide default}
* authenticator will be used.
*/
public OkHttpClient setAuthenticator(OkAuthenticator authenticator) {
this.authenticator = authenticator;
return this;
}
public OkAuthenticator getAuthenticator() {
return authenticator;
}
/**
* Sets the connection pool used to recycle HTTP and HTTPS connections.
*
* <p>If unset, the {@link ConnectionPool#getDefault() system-wide
* default} connection pool will be used.
*/
public OkHttpClient setConnectionPool(ConnectionPool connectionPool) {
this.connectionPool = connectionPool;
return this;
}
public ConnectionPool getConnectionPool() {
return connectionPool;
}
/**
* Configure this client to follow redirects from HTTPS to HTTP and from HTTP
* to HTTPS.
*
* <p>If unset, protocol redirects will be followed. This is different than
* the built-in {@code HttpURLConnection}'s default.
*/
public OkHttpClient setFollowProtocolRedirects(boolean followProtocolRedirects) {
this.followProtocolRedirects = followProtocolRedirects;
return this;
}
public boolean getFollowProtocolRedirects() {
return followProtocolRedirects;
}
public RouteDatabase getRoutesDatabase() {
return routeDatabase;
}
/**
* @deprecated OkHttp 1.5 enforces an enumeration of {@link Protocol protocols}
* that can be selected. Please switch to {@link #setProtocols(java.util.List)}.
*/
@Deprecated
public OkHttpClient setTransports(List<String> transports) {
List<Protocol> protocols = new ArrayList<Protocol>(transports.size());
for (int i = 0, size = transports.size(); i < size; i++) {
try {
Protocol protocol = Util.getProtocol(ByteString.encodeUtf8(transports.get(i)));
protocols.add(protocol);
} catch (IOException e) {
throw new IllegalArgumentException(e);
}
}
return setProtocols(protocols);
}
/**
* Configure the protocols used by this client to communicate with remote
* servers. By default this client will prefer the most efficient transport
* available, falling back to more ubiquitous protocols. Applications should
* only call this method to avoid specific compatibility problems, such as web
* servers that behave incorrectly when SPDY is enabled.
*
* <p>The following protocols are currently supported:
* <ul>
* <li><a href="http://www.w3.org/Protocols/rfc2616/rfc2616.html">http/1.1</a>
* <li><a href="http://www.chromium.org/spdy/spdy-protocol/spdy-protocol-draft3-1">spdy/3.1</a>
* <li><a href="http://tools.ietf.org/html/draft-ietf-httpbis-http2-09">HTTP-draft-09/2.0</a>
* </ul>
*
* <p><strong>This is an evolving set.</strong> Future releases may drop
* support for transitional protocols (like spdy/3.1), in favor of their
* successors (spdy/4 or http/2.0). The http/1.1 transport will never be
* dropped.
*
* <p>If multiple protocols are specified, <a
* href="https://technotes.googlecode.com/git/nextprotoneg.html">NPN</a> will
* be used to negotiate a transport. Future releases may use another mechanism
* (such as <a href="http://tools.ietf.org/html/draft-friedl-tls-applayerprotoneg-02">ALPN</a>)
* to negotiate a transport.
*
* @param protocols the protocols to use, in order of preference. The list
* must contain "http/1.1". It must not contain null.
*/
public OkHttpClient setProtocols(List<Protocol> protocols) {
protocols = Util.immutableList(protocols);
if (!protocols.contains(Protocol.HTTP_11)) {
throw new IllegalArgumentException("protocols doesn't contain http/1.1: " + protocols);
}
if (protocols.contains(null)) {
throw new IllegalArgumentException("protocols must not contain null");
}
this.protocols = Util.immutableList(protocols);
return this;
}
/**
* @deprecated OkHttp 1.5 enforces an enumeration of {@link Protocol
* protocols} that can be selected. Please switch to {@link
* #getProtocols()}.
*/
@Deprecated
public List<String> getTransports() {
List<String> transports = new ArrayList<String>(protocols.size());
for (int i = 0, size = protocols.size(); i < size; i++) {
transports.add(protocols.get(i).name.utf8());
}
return transports;
}
public List<Protocol> getProtocols() {
return protocols;
}
public HttpURLConnection open(URL url) {
return open(url, proxy);
}
HttpURLConnection open(URL url, Proxy proxy) {
String protocol = url.getProtocol();
// 将该对象clone后设置一些其它的属性返回。里面会设置一个默认的连接池。 OkHttpClient copy = copyWithDefaults(); copy.proxy = proxy; // 返回了HttpURLConnectionImpl，而且把clone后的OKHttpClient对象传递进去。 if (protocol.equals("http")) return new HttpURLConnectionImpl(url, copy); if (protocol.equals("https")) return new HttpsURLConnectionImpl(url, copy); throw new IllegalArgumentException("Unexpected protocol: " + protocol); } /** * Returns a shallow copy of this OkHttpClient that uses the system-wide * default for each field that hasn't been explicitly configured. */ OkHttpClient copyWithDefaults() { OkHttpClient result = clone(); if (result.proxySelector == null) { result.proxySelector = ProxySelector.getDefault(); } if (result.cookieHandler == null) { result.cookieHandler = CookieHandler.getDefault(); } if (result.responseCache == null) { result.responseCache = toOkResponseCache(ResponseCache.getDefault()); } if (result.sslSocketFactory == null) { result.sslSocketFactory = getDefaultSSLSocketFactory(); } if (result.hostnameVerifier == null) { result.hostnameVerifier = OkHostnameVerifier.INSTANCE; } if (result.authenticator == null) { result.authenticator = HttpAuthenticator.SYSTEM_DEFAULT; } if (result.connectionPool == null) { // 会给OkHttpClient设置一个默认的连接池 result.connectionPool = ConnectionPool.getDefault(); } if (result.protocols == null) { result.protocols = Util.HTTP2_SPDY3_AND_HTTP; } return result; } /** * Java and Android programs default to using a single global SSL context, * accessible to HTTP clients as {@link SSLSocketFactory#getDefault()}. If we * used the shared SSL context, when OkHttp enables NPN for its SPDY-related * stuff, it would also enable NPN for other usages, which might crash them * because NPN is enabled when it isn't expected to be. * <p> * This code avoids that by defaulting to an OkHttp created SSL context. The * significant drawback of this approach is that apps that customize the * global SSL context will lose these customizations. */ private synchronized SSLSocketFactory getDefaultSSLSocketFactory() { if (sslSocketFactory == null) { try { SSLContext sslContext = SSLContext.getInstance("TLS"); sslContext.init(null, null, null); sslSocketFactory = sslContext.getSocketFactory(); } catch (GeneralSecurityException e) { throw new AssertionError(); // The system has no TLS. Just give up. } } return sslSocketFactory; } /** Returns a shallow copy of this OkHttpClient. */ @Override public OkHttpClient clone() { try { return (OkHttpClient) super.clone(); } catch (CloneNotSupportedException e) { throw new AssertionError(); } } private OkResponseCache toOkResponseCache(ResponseCache responseCache) { return responseCache == null || responseCache instanceof OkResponseCache ? (OkResponseCache) responseCache : new ResponseCacheAdapter(responseCache); } /** * Creates a URLStreamHandler as a {@link URL#setURLStreamHandlerFactory}. * * <p>This code configures OkHttp to handle all HTTP and HTTPS connections * created with {@link URL#openConnection()}: <pre> {@code * * OkHttpClient okHttpClient = new OkHttpClient(); * URL.setURLStreamHandlerFactory(okHttpClient); * }</pre> */ public URLStreamHandler createURLStreamHandler(final String protocol) { if (!protocol.equals("http") && !protocol.equals("https")) return null; return new URLStreamHandler() { @Override protected URLConnection openConnection(URL url) { return open(url); } @Override protected URLConnection openConnection(URL url, Proxy proxy) { return open(url, proxy); } @Override protected int getDefaultPort() { if (protocol.equals("http")) return 80; if (protocol.equals("https")) return 443; throw new AssertionError(); } }; } }
接着看一下HttpURLConnectionImpl类,它是HttpURLConnection的子类：
public class HttpURLConnectionImpl extends HttpURLConnection {
.....
}到这里new URL(url).openConnection()方法已经分析完了，事实上就是返回了一个HtppURLConnectionImpl对象。
我们在使用HttpURLConnection都是这样使用：
String url = "http://www.baidu.com"
URL url = new URL(url);
HttpURLConnection connection = (HttpURLConnection)url.openConnection();
// 设置一些请求头等參数
...
connection.connect();
// 然后调用一些其它的获取结果或者状态的方法。
...
connection.getResponseCode();
connection.getOuoputStream();
connection.getInputStream();
....上面分析了new URL().openConnection()那我们这里就接着分析第二步了，就是调用connect()方法的处理:
这里看一下HttpURLConnectionImpl.connect()方法：
@Override public final void connect() throws IOException {
initHttpEngine();
boolean success;
do {
success = execute(false);
} while (!success);
}接着看一下initHttpEngine()方法的实现:
private void initHttpEngine() throws IOException {
if (httpEngineFailure != null) {
throw httpEngineFailure;
} else if (httpEngine != null) {
return;
}
connected = true;
try {
if (doOutput) {
if (method.equals("GET")) {
// they are requesting a stream to write to. This implies a POST method
method = "POST";
} else if (!HttpMethod.hasRequestBody(method)) {
// If the request method is neither POST nor PUT nor PATCH, then you're not writing
throw new ProtocolException(method + " does not support writing");
}
}
// 将newHttpEngine方法的返回值赋值给HttpEngine的成员变量。 httpEngine = newHttpEngine(method, null, null); } catch (IOException e) { httpEngineFailure = e; throw e; } } private HttpEngine newHttpEngine(String method, Connection connection, RetryableSink requestBody) { Request.Builder builder = new Request.Builder() .url(getURL()) .method(method, null /* No body; that's passed separately. */); Headers headers = requestHeaders.build(); for (int i = 0; i < headers.size(); i++) { builder.addHeader(headers.name(i), headers.value(i)); } boolean bufferRequestBody; if (fixedContentLength != -1) { bufferRequestBody = false; builder.header("Content-Length", Long.toString(fixedContentLength)); } else if (chunkLength > 0) { bufferRequestBody = false; builder.header("Transfer-Encoding", "chunked"); } else { bufferRequestBody = true; } Request request = builder.build(); // If we're currently not using caches, make sure the engine's client doesn't have one. OkHttpClient engineClient = client; if (engineClient.getOkResponseCache() != null && !getUseCaches()) { engineClient = client.clone().setOkResponseCache(null); } // 将之前通过构造函数传递进来的OkHttpClient对象clone一份后再传递给HttpEngine return new HttpEngine(engineClient, request, bufferRequestBody, connection, null, requestBody); }
到这里我们知道他会创建一个HttpEngine类。我们先无论它。接着看一下execute()方法的内部实现：
/**
* Sends a request and optionally reads a response. Returns true if the
* request was successfully executed, and false if the request can be
* retried. Throws an exception if the request failed permanently.
*/
private boolean execute(boolean readResponse) throws IOException {
try {
// 调用了HttpEngine的sendRequest方法。
httpEngine.sendRequest();
route = httpEngine.getRoute();
handshake = httpEngine.getConnection() != null
? httpEngine.getConnection().getHandshake()
: null;
// 读取结果。我们先不分析这里，等把sendRequest部分所有分析完毕后再回来分析readResponse()部分。
if (readResponse) {
httpEngine.readResponse();
}
return true;
} catch (IOException e) {
HttpEngine retryEngine = httpEngine.recover(e);
if (retryEngine != null) {
httpEngine = retryEngine;
return false;
}
// Give up; recovery is not possible.
httpEngineFailure = e;
throw e;
}
}到这里。能够大胆的推測一下了HttpEngine应该就是实际在Socket链接上进行数据收发的类。 当然这仅仅是推測，接着看一下它的实现:
/**
* Handles a single HTTP request/response pair. Each HTTP engine follows this
* lifecycle:
* <ol>
* <li>It is created.
* <li>The HTTP request message is sent with sendRequest(). Once the request
* is sent it is an error to modify the request headers. After
* sendRequest() has been called the request body can be written to if
* it exists.
* <li>The HTTP response message is read with readResponse(). After the
* response has been read the response headers and body can be read.
* All responses have a response body input stream, though in some
* instances this stream is empty.
* </ol>
*
* <p>The request and response may be served by the HTTP response cache, by the
* network, or by both in the event of a conditional GET.
*/文档验证了我们的想法。
由于它内部实现代码比較多，所以就不所有贴了，依照重要的一步步分析，既然上面调用了sendRequest()方法，这里就从他入手：
/**
* Figures out what the response source will be, and opens a socket to that
* source if necessary. Prepares the request headers and gets ready to start
* writing the request body if it exists.
*/
public final void sendRequest() throws IOException {
if (responseSource != null) return; // Already sent.
if (transport != null) throw new IllegalStateException();
// 设置一些请求头，正式这种方法内部默认设置了`Keep-Alive`的值，也就是在Android Level 9之前由于Bug，我们须要关闭它的详细处理位置。
prepareRawRequestHeaders();
// 处理cache
OkResponseCache responseCache = client.getOkResponseCache();
Response cacheResponse = responseCache != null
? responseCache.get(request)
: null;
long now = System.currentTimeMillis();
CacheStrategy cacheStrategy = new CacheStrategy.Factory(now, request, cacheResponse).get();
responseSource = cacheStrategy.source;
request = cacheStrategy.request;
if (responseCache != null) {
// 记录下当前的请求是来自网络请求还是来时缓存中的数据。 responseCache.trackResponse(responseSource); } if (responseSource != ResponseSource.NETWORK) { validatingResponse = cacheStrategy.response; } if (cacheResponse != null && !responseSource.usesCache()) { closeQuietly(cacheResponse.body()); // We don't need this cached response. Close it. } if (responseSource.requiresConnection()) { // Open a connection unless we inherited one from a redirect. if (connection == null) { // 调用connect方法，内部会又一次创建一个connection，连接到server、重定向或者通过代理。 connect(); } // 通过Connection创建一个HttpTransport类。这个和后面的connection类一起看， Transport接口提供了一个用户写Request头和数据的输出流。
transport = (Transport) connection.newTransport(this); // Create a request body if we don't have one already. We'll already have // one if we're retrying a failed POST. if (hasRequestBody() && requestBodyOut == null) { // 通过transport创建一个请求体的输出流，requestBodyOut是Sink接口的实现类。事实上就是将请求头和请求体发送给server。这部分跟下去内容比較多，就不往下跟了。 // 到这里就已经完毕了与server的连接功能，而且把请求内容发送给server。
请求部分就运行完了，能够回去了，还知道开头是哪吗？哈哈。接下来的就是从server接口读取返回数据了。
requestBodyOut = transport.createRequestBody(request); } } else { // We're using a cached response. Recycle a connection we may have inherited from a redirect. if (connection != null) { // 回收connection。这里就看到了连接池。这个client就是构造函数中传递进来的OKHttpClient client.getConnectionPool().recycle(connection); connection = null; } // No need for the network! Promote the cached response immediately. this.response = validatingResponse; if (validatingResponse.body() != null) { initContentStream(validatingResponse.body().source()); } } }
接着看一下connect()方法：
/** Connect to the origin server either directly or via a proxy. */
private void connect() throws IOException {
if (connection != null) throw new IllegalStateException();
if (routeSelector == null) {
String uriHost = request.url().getHost();
if (uriHost == null || uriHost.length() == 0) {
throw new UnknownHostException(request.url().toString());
}
SSLSocketFactory sslSocketFactory = null;
HostnameVerifier hostnameVerifier = null;
if (request.isHttps()) {
sslSocketFactory = client.getSslSocketFactory();
hostnameVerifier = client.getHostnameVerifier();
}
Address address = new Address(uriHost, getEffectivePort(request.url()), sslSocketFactory,
hostnameVerifier, client.getAuthenticator(), client.getProxy(), client.getProtocols());
// RoteSeclector类介绍. Selects routes to connect to an origin server. Each connection requires a
// choice of proxy server, IP address, and TLS mode. Connections may also be
// recycled.注意他把OkHttpClient中的connection pool传递进来了。 routeSelector = new RouteSelector(address, request.uri(), client.getProxySelector(), client.getConnectionPool(), Dns.DEFAULT, client.getRoutesDatabase()); } // roteSeclecrot.next()方法的凝视Returns the next route address to attempt.这一步非常重要。 connection = routeSelector.next(request.method()); if (!connection.isConnected()) { // connection 进行连接了啊。他里面会用Socket開始连了。。后面我们再细看。简单的说Connection管理了Socket，后面我们要重点看这个类。 connection.connect(client.getConnectTimeout(), client.getReadTimeout(), getTunnelConfig()); if (connection.isSpdy()) client.getConnectionPool().share(connection); client.getRoutesDatabase().connected(connection.getRoute()); } else if (!connection.isSpdy()) { connection.updateReadTimeout(client.getReadTimeout()); } route = connection.getRoute(); }
接下来我们要先看一下routeSelector.next()方法怎样返回connection对象，然后在看Connection.connect()方法：
/**
* Returns the next route address to attempt.
*
* @throws NoSuchElementException if there are no more routes to attempt.
*/
public Connection next(String method) throws IOException {
// 使用连接池获取Connection的地方。pool就是OkHttpClient中的连接池。
// Always prefer pooled connections over new connections.
for (Connection pooled; (pooled = pool.get(address)) != null; ) {
// 匹配get方法，或者推断是否可读，http1.x是通过推断socket是否关闭来推断是否可读的。
if (method.equals("GET") || pooled.isReadable()) return pooled;
// 不满足重用。就关闭。
pooled.close();
}
// Compute the next route to attempt.
if (!hasNextTlsMode()) {
if (!hasNextInetSocketAddress()) {
if (!hasNextProxy()) {
if (!hasNextPostponed()) {
throw new NoSuchElementException();
}
return new Connection(pool, nextPostponed());
}
lastProxy = nextProxy();
resetNextInetSocketAddress(lastProxy);
}
lastInetSocketAddress = nextInetSocketAddress();
resetNextTlsMode();
}
boolean modernTls = nextTlsMode() == TLS_MODE_MODERN;
Route route = new Route(address, lastProxy, lastInetSocketAddress, modernTls);
if (routeDatabase.shouldPostpone(route)) {
postponedRoutes.add(route);
// We will only recurse in order to skip previously failed routes. They will be
// tried last.
return next(method);
}
// 没有的话也会去创建，并把OkHttpClient中的连接池传递进去。 return new Connection(pool, route); }
再看一下Connection类的实现以及其connect()方法:
public final class Connection implements Closeable {
private final ConnectionPool pool;
private final Route route;
private Socket socket;
private InputStream in;
private OutputStream out;
private BufferedSource source;
private BufferedSink sink;
private boolean connected = false;
private HttpConnection httpConnection;
private SpdyConnection spdyConnection;
private int httpMinorVersion = 1; // Assume HTTP/1.1
private long idleStartTimeNs;
private Handshake handshake;
private int recycleCount;
// 传递进来的连接池。
public Connection(ConnectionPool pool, Route route) {
this.pool = pool;
this.route = route;
}
public void connect(int connectTimeout, int readTimeout, TunnelRequest tunnelRequest)
throws IOException {
if (connected) throw new IllegalStateException("already connected");
socket = (route.proxy.type() != Proxy.Type.HTTP) ? new Socket(route.proxy) : new Socket();
// 连socket了，内部调用了socket.connect()方法。Connects this socket to the given remote host address and port specified
// by the SocketAddress {@code remoteAddr} with the specified timeout. The
// connecting method will block until the connection is established or an
// error occurred.
Platform.get().connectSocket(socket, route.inetSocketAddress, connectTimeout);
socket.setSoTimeout(readTimeout);
in = socket.getInputStream();
out = socket.getOutputStream();
if (route.address.sslSocketFactory != null) {
// 完毕TLS握手和验证
upgradeToTls(tunnelRequest);
} else {
initSourceAndSink();
// 创建HttpConnection.A socket connection that can be used to send HTTP/1.1 messages.
// 这个HttpConnection有什么用呢？就是以下的newTransport方法中会用。而且还要把连接池传递进去？
httpConnection = new HttpConnection(pool, this, source, sink); } // 这样就已经连接上了 connected = true; } // 该方法决定了使用的协议是SPDY还是HTTP /** Returns the transport appropriate for this connection. */ public Object newTransport(HttpEngine httpEngine) throws IOException { return (spdyConnection != null) ?
new SpdyTransport(httpEngine, spdyConnection) : new HttpTransport(httpEngine, httpConnection); } } ```` 到这里就已经把发送请求到server的部分所有分析完了。就想上面所说的我们应该回去了，回去分析发送完请求后的部分。 我们这个分析是在`HttpURLConnectionImpl.execute()`方法中的`HttpEngine.sendRequest()`方法開始一直分析下来的。 所以我们还是要回到`HttpURLConnectionImpl.execute()`方法中. <div class="se-preview-section-delimiter"></div> ```java private boolean execute(boolean readResponse) throws IOException { try { // 上面已经把sendRequest部分所有分析完了。该方法会与server通过Socket建立连接并把请求部分发送给server。 httpEngine.sendRequest(); route = httpEngine.getRoute(); handshake = httpEngine.getConnection() != null ? httpEngine.getConnection().getHandshake() : null; if (readResponse) { // 发送完请求之后该干什么呢？ 当然是读取返回数据了。。。 没错就是它。可是不要忘了在connect()方法传递过来的时候这个值是false。
// 所以这一步在这里是不运行的，可是我们也分析下，方便以后理解。
那这个值什么时候是true呢？就是在getResponse()方法中。 httpEngine.readResponse(); } return true; } catch (IOException e) { HttpEngine retryEngine = httpEngine.recover(e); if (retryEngine != null) { httpEngine = retryEngine; return false; } // Give up; recovery is not possible. httpEngineFailure = e; throw e; } }
接着看HttpEngine.readResponse()方法吧。凝视说的非常明确。
/**
* Flushes the remaining request header and body, parses the HTTP response
* headers and starts reading the HTTP response body if it exists.
*/
public final void readResponse() throws IOException {
if (response != null) return;
if (responseSource == null) throw new IllegalStateException("call sendRequest() first!");
if (!responseSource.requiresConnection()) return;
// Flush the request body if there's data outstanding.
if (bufferedRequestBody != null && bufferedRequestBody.buffer().size() > 0) {
bufferedRequestBody.flush();
}
if (sentRequestMillis == -1) {
if (OkHeaders.contentLength(request) == -1 && requestBodyOut instanceof RetryableSink) {
// We might not learn the Content-Length until the request body has been buffered.
long contentLength = ((RetryableSink) requestBodyOut).contentLength();
request = request.newBuilder()
.header("Content-Length", Long.toString(contentLength))
.build();
}
transport.writeRequestHeaders(request);
}
if (requestBodyOut != null) {
if (bufferedRequestBody != null) {
// This also closes the wrapped requestBodyOut.
bufferedRequestBody.close();
} else {
requestBodyOut.close();
}
if (requestBodyOut instanceof RetryableSink) {
transport.writeRequestBody((RetryableSink) requestBodyOut);
}
}
transport.flushRequest();
response = transport.readResponseHeaders()
.request(request)
.handshake(connection.getHandshake())
.header(OkHeaders.SENT_MILLIS, Long.toString(sentRequestMillis))
.header(OkHeaders.RECEIVED_MILLIS, Long.toString(System.currentTimeMillis()))
.setResponseSource(responseSource)
.build();
connection.setHttpMinorVersion(response.httpMinorVersion());
receiveHeaders(response.headers());
if (responseSource == ResponseSource.CONDITIONAL_CACHE) {
// 检查缓存是否可用，假设可用就用当前缓存的response。而且释放该连接。
if (validatingResponse.validate(response)) {
transport.emptyTransferStream();
releaseConnection();
response = combine(validatingResponse, response);
// Update the cache after combining headers but before stripping the
// Content-Encoding header (as performed by initContentStream()).
OkResponseCache responseCache = client.getOkResponseCache();
responseCache.trackConditionalCacheHit();
responseCache.update(validatingResponse, cacheableResponse());
if (validatingResponse.body() != null) {
initContentStream(validatingResponse.body().source());
}
return;
} else {
closeQuietly(validatingResponse.body());
}
}
if (!hasResponseBody()) {
// Don't call initContentStream() when the response doesn't have any content.
responseTransferSource = transport.getTransferStream(cacheRequest);
responseBody = responseTransferSource;
return;
}
// 设置cacheRequest的值
maybeCache();
// 设置返回数据了。transport这里也就是HttpTransport。他的getTransferStream返回的是一个Source接口的实现类。也就是返回的数据。
initContentStream(transport.getTransferStream(cacheRequest));
}先看一下maybeCache()方法：
private void maybeCache() throws IOException {
OkResponseCache responseCache = client.getOkResponseCache();
if (responseCache == null) return;
// Should we cache this response for this request? if (!CacheStrategy.isCacheable(response, request)) { responseCache.maybeRemove(request); return; } // Offer this request to the cache. cacheRequest = responseCache.put(cacheableResponse()); }
再看一下initContentStream()方法：
/**
* Initialize the response content stream from the response transfer source.
* These two sources are the same unless we're doing transparent gzip, in
* which case the content source is decompressed.
*
* <p>Whenever we do transparent gzip we also strip the corresponding headers.
* We strip the Content-Encoding header to prevent the application from
* attempting to double decompress. We strip the Content-Length header because
* it is the length of the compressed content, but the application is only
* interested in the length of the uncompressed content.
*
* <p>This method should only be used for non-empty response bodies. Response
* codes like "304 Not Modified" can include "Content-Encoding: gzip" without
* a response body and we will crash if we attempt to decompress the zero-byte
* source.
*/
private void initContentStream(Source transferSource) throws IOException {
responseTransferSource = transferSource;
if (transparentGzip && "gzip".equalsIgnoreCase(response.header("Content-Encoding"))) {
// 没有结果时response为null，有结果了就会给他赋值。 response = response.newBuilder() .removeHeader("Content-Encoding") .removeHeader("Content-Length") .build(); responseBody = new GzipSource(transferSource); } else { responseBody = transferSource; } }
到这里又运行完了，responseBody已经被赋值了，他是一个Source接口的实现类。也就是讲到这里。这次网络请求就完毕了。也收到了server返回的数据。
也就是讲到这里我们已经分析了:
HttpURLConnection connection = (HttpURLConnection)new URL(url).openConnection();
connection.connect();接下来就是分析connection.getResponseCode()以及connection.getOutputStream()这两个方法了。
先看一下getResponseCode()方法：
@Override public final int getResponseCode() throws IOException {
// 看到了吗？这里就是刚才我们说的execute()方法的參数什么时候会为true的地方。
return getResponse().getResponse().code();
}那我们接着看一下getResponse()方法，事实上就是直接读取响应头的响应值：
/**
* Aggressively tries to get the final HTTP response, potentially making
* many HTTP requests in the process in order to cope with redirects and
* authentication.
*/
private HttpEngine getResponse() throws IOException {
initHttpEngine();
// 假设已经有返回数据了就直接返回
if (httpEngine.hasResponse()) {
return httpEngine;
}
while (true) {
// 參数为true了。
if (!execute(true)) {
continue;
}
Retry retry = processResponseHeaders();
if (retry == Retry.NONE) {
httpEngine.releaseConnection();
return httpEngine;
}
// The first request was insufficient. Prepare for another...
String retryMethod = method;
Sink requestBody = httpEngine.getRequestBody();
// Although RFC 2616 10.3.2 specifies that a HTTP_MOVED_PERM
// redirect should keep the same method, Chrome, Firefox and the
// RI all issue GETs when following any redirect.
int responseCode = httpEngine.getResponse().code();
if (responseCode == HTTP_MULT_CHOICE
|| responseCode == HTTP_MOVED_PERM
|| responseCode == HTTP_MOVED_TEMP
|| responseCode == HTTP_SEE_OTHER) {
retryMethod = "GET";
requestHeaders.removeAll("Content-Length");
requestBody = null;
}
if (requestBody != null && !(requestBody instanceof RetryableSink)) {
throw new HttpRetryException("Cannot retry streamed HTTP body", responseCode);
}
if (retry == Retry.DIFFERENT_CONNECTION) {
httpEngine.releaseConnection();
}
Connection connection = httpEngine.close();
httpEngine = newHttpEngine(retryMethod, connection, (RetryableSink) requestBody);
}
}接着看一下getOutputStream()的源代码：
@Override public final OutputStream getOutputStream() throws IOException {
// 看到了吗？他内部会先去调用connect()方法
connect();
// 这里可能有人会有说。getOutputStream和request body有什么关系。应该是response body才对啊。
// 不要弄混了啊，getOutputStream是要把post请求的数据输入给请求。 BufferedSink sink = httpEngine.getBufferedRequestBody(); if (sink == null) { throw new ProtocolException("method does not support a request body: " + method); } else if (httpEngine.hasResponse()) { throw new ProtocolException("cannot write request body after response has been read"); } return sink.outputStream(); }
顺便再看一下getInputStream()方法：
@Override public final InputStream getInputStream() throws IOException {
if (!doInput) {
throw new ProtocolException("This protocol does not support input");
}
// 它也会直接调用getResponse()方法。这个比較好理解。 HttpEngine response = getResponse(); // if the requested file does not exist, throw an exception formerly the // Error page from the server was returned if the requested file was // text/html this has changed to return FileNotFoundException for all // file types if (getResponseCode() >= HTTP_BAD_REQUEST) { throw new FileNotFoundException(url.toString()); } InputStream result = response.getResponseBodyBytes(); if (result == null) { throw new ProtocolException("No response body exists; responseCode=" + getResponseCode()); } return result; }
再顺便看一下HttpURLConnection.disconnect()方法，由于这种方法可能非常多人不清楚该不该调用他,只是凝视说的非常明确了：
/**
* Releases this connection so that its resources may be either reused or
* closed.
*
* <p>Unlike other Java implementations, this will not necessarily close
* socket connections that can be reused. You can disable all connection
* reuse by setting the {@code http.keepAlive} system property to {@code
* false} before issuing any HTTP requests.
*/
@Override public final void disconnect() {
// Calling disconnect() before a connection exists should have no effect.
if (httpEngine != null) {
// 调用HttpEngine.close()方法
httpEngine.close();
}
}看一下HttpEngine.close()方法:
/**
* Release any resources held by this engine. If a connection is still held by
* this engine, it is returned.
*/
public final Connection close() {
if (bufferedRequestBody != null) {
// This also closes the wrapped requestBodyOut.
closeQuietly(bufferedRequestBody);
} else if (requestBodyOut != null) {
closeQuietly(requestBodyOut);
}
// If this engine never achieved a response body, its connection cannot be reused.
if (responseBody == null) {
closeQuietly(connection);
connection = null;
return null;
}
// Close the response body. This will recycle the connection if it is eligible.
closeQuietly(responseBody);
// Clear the buffer held by the response body input stream adapter.
closeQuietly(responseBodyBytes);
// HttpTransport.canReuseConnection()用于推断该Connection是否可复用
// Close the connection if it cannot be reused.
if (transport != null && !transport.canReuseConnection()) {
closeQuietly(connection);
connection = null;
return null;
}
Connection result = connection;
connection = null;
return result;
}继续看一下closeQuietly(connection)方法：
/**
* Closes {@code closeable}, ignoring any checked exceptions. Does nothing
* if {@code closeable} is null.
*/
public static void closeQuietly(Closeable closeable) {
if (closeable != null) {
try {
// 这里也就是Connection的close()方法
closeable.close();
} catch (RuntimeException rethrown) {
throw rethrown;
} catch (Exception ignored) {
}
}
}再接着看一下Connection.close()方法：
@Override public void close() throws IOException {
// 直接调用了socket.close()方法。这些socket也关了。 socket.close(); }
再看Socket.close()方法：
package com.squareup.okhttp;
/**
* Closes the socket. It is not possible to reconnect or rebind to this
* socket thereafter which means a new socket instance has to be created.
*
* @throws IOException
* if an error occurs while closing the socket.
*/
public synchronized void close() throws IOException {
isClosed = true;
isConnected = false;
// RI compatibility: the RI returns the any address (but the original local port) after
// close.
localAddress = Inet4Address.ANY;
impl.close();
}到这里就都看完了。最后我们再看一下上面用到的连接池，也就是ConnectionPool类: 由于在上面的分析中。我们发现此类贯穿了非常多类。
它为OkHttpClient中的对象，后贯穿到HttpEngine、Connection、HttpConnection等。所以要分析下。
/**
* Manages reuse of HTTP and SPDY connections for reduced network latency. HTTP
* requests that share the same {@link com.squareup.okhttp.Address} may share a
* {@link com.squareup.okhttp.Connection}. This class implements the policy of
* which connections to keep open for future use.
*
* <p>The {@link #getDefault() system-wide default} uses system properties for
* tuning parameters:
* <ul>
* <li>{@code http.keepAlive} true if HTTP and SPDY connections should be
* pooled at all. Default is true.
* <li>{@code http.maxConnections} maximum number of idle connections to
* each to keep in the pool. Default is 5.
* <li>{@code http.keepAliveDuration} Time in milliseconds to keep the
* connection alive in the pool before closing it. Default is 5 minutes.
* This property isn't used by {@code HttpURLConnection}.
* </ul>
*
* <p>The default instance <i>doesn't</i> adjust its configuration as system
* properties are changed. This assumes that the applications that set these
* parameters do so before making HTTP connections, and that this class is
* initialized lazily.
*/
public class ConnectionPool {
private static final int MAX_CONNECTIONS_TO_CLEANUP = 2;
private static final long DEFAULT_KEEP_ALIVE_DURATION_MS = 5 * 60 * 1000; // 5 min
// 这个就是getDefault方法所返回的默认连接池。
private static final ConnectionPool systemDefault;
static {
String keepAlive = System.getProperty("http.keepAlive");
// 存活时间
String keepAliveDuration = System.getProperty("http.keepAliveDuration");
// 最大空暇连接数
String maxIdleConnections = System.getProperty("http.maxConnections");
long keepAliveDurationMs = keepAliveDuration != null ? Long.parseLong(keepAliveDuration)
: DEFAULT_KEEP_ALIVE_DURATION_MS;
if (keepAlive != null && !Boolean.parseBoolean(keepAlive)) {
systemDefault = new ConnectionPool(0, keepAliveDurationMs);
} else if (maxIdleConnections != null) {
systemDefault = new ConnectionPool(Integer.parseInt(maxIdleConnections), keepAliveDurationMs);
} else {
systemDefault = new ConnectionPool(5, keepAliveDurationMs);
}
}
/** The maximum number of idle connections for each address. */
private final int maxIdleConnections;
private final long keepAliveDurationNs;
private final LinkedList<Connection> connections = new LinkedList<Connection>();
/** We use a single background thread to cleanup expired connections. */
private final ExecutorService executorService = new ThreadPoolExecutor(0, 1,
60L, TimeUnit.SECONDS, new LinkedBlockingQueue<Runnable>(),
Util.threadFactory("OkHttp ConnectionPool", true));
private final Runnable connectionsCleanupRunnable = new Runnable() {
@Override public void run() {
List<Connection> expiredConnections = new ArrayList<Connection>(MAX_CONNECTIONS_TO_CLEANUP);
int idleConnectionCount = 0;
synchronized (ConnectionPool.this) {
for (ListIterator<Connection> i = connections.listIterator(connections.size());
i.hasPrevious(); ) {
Connection connection = i.previous();
if (!connection.isAlive() || connection.isExpired(keepAliveDurationNs)) {
i.remove();
expiredConnections.add(connection);
if (expiredConnections.size() == MAX_CONNECTIONS_TO_CLEANUP) break;
} else if (connection.isIdle()) {
idleConnectionCount++;
}
}
for (ListIterator<Connection> i = connections.listIterator(connections.size());
i.hasPrevious() && idleConnectionCount > maxIdleConnections; ) {
Connection connection = i.previous();
if (connection.isIdle()) {
expiredConnections.add(connection);
i.remove();
--idleConnectionCount;
}
}
}
for (Connection expiredConnection : expiredConnections) {
Util.closeQuietly(expiredConnection);
}
}
};
public ConnectionPool(int maxIdleConnections, long keepAliveDurationMs) {
this.maxIdleConnections = maxIdleConnections;
this.keepAliveDurationNs = keepAliveDurationMs * 1000 * 1000;
}
/**
* Returns a snapshot of the connections in this pool, ordered from newest to
* oldest. Waits for the cleanup callable to run if it is currently scheduled.
*/
List<Connection> getConnections() {
waitForCleanupCallableToRun();
synchronized (this) {
return new ArrayList<Connection>(connections);
}
}
/**
* Blocks until the executor service has processed all currently enqueued
* jobs.
*/
private void waitForCleanupCallableToRun() {
try {
executorService.submit(new Runnable() {
@Override public void run() {
}
}).get();
} catch (Exception e) {
throw new AssertionError();
}
}
public static ConnectionPool getDefault() {
return systemDefault;
}
/** Returns total number of connections in the pool. */
public synchronized int getConnectionCount() {
return connections.size();
}
/** Returns total number of spdy connections in the pool. */
public synchronized int getSpdyConnectionCount() {
int total = 0;
for (Connection connection : connections) {
if (connection.isSpdy()) total++;
}
return total;
}
/** Returns total number of http connections in the pool. */
public synchronized int getHttpConnectionCount() {
int total = 0;
for (Connection connection : connections) {
if (!connection.isSpdy()) total++;
}
return total;
}
/** Returns a recycled connection to {@code address}, or null if no such connection exists. */
public synchronized Connection get(Address address) {
Connection foundConnection = null;
for (ListIterator<Connection> i = connections.listIterator(connections.size());
i.hasPrevious(); ) {
Connection connection = i.previous();
if (!connection.getRoute().getAddress().equals(address)
|| !connection.isAlive()
|| System.nanoTime() - connection.getIdleStartTimeNs() >= keepAliveDurationNs) {
continue;
}
i.remove();
if (!connection.isSpdy()) {
// 不是spdy连接
try {
// Platforml类对当前Android平台做了适配。
Platform.get().tagSocket(connection.getSocket());
} catch (SocketException e) {
Util.closeQuietly(connection);
// When unable to tag, skip recycling and close
Platform.get().logW("Unable to tagSocket(): " + e);
continue;
}
}
// 找到可复用的Connection
foundConnection = connection;
break;
}
// 针对spdy连接，加入到连接池中
if (foundConnection != null && foundConnection.isSpdy()) {
connections.addFirst(foundConnection); // Add it back after iteration.
}
executorService.execute(connectionsCleanupRunnable);
return foundConnection;
}
/**
* Gives {@code connection} to the pool. The pool may store the connection,
* or close it, as its policy describes.
*
* <p>It is an error to use {@code connection} after calling this method.
*/
public void recycle(Connection connection) {
if (connection.isSpdy()) {
return;
}
if (!connection.isAlive()) {
Util.closeQuietly(connection);
return;
}
try {
Platform.get().untagSocket(connection.getSocket());
} catch (SocketException e) {
// When unable to remove tagging, skip recycling and close.
Platform.get().logW("Unable to untagSocket(): " + e);
Util.closeQuietly(connection);
return;
}
synchronized (this) {
connections.addFirst(connection);
connection.incrementRecycleCount();
connection.resetIdleStartTime();
}
executorService.execute(connectionsCleanupRunnable);
}
/**
* Shares the SPDY connection with the pool. Callers to this method may
* continue to use {@code connection}.
*/
public void share(Connection connection) {
if (!connection.isSpdy()) throw new IllegalArgumentException();
executorService.execute(connectionsCleanupRunnable);
if (connection.isAlive()) {
synchronized (this) {
connections.addFirst(connection);
}
}
}
/** Close and remove all connections in the pool. */
public void evictAll() {
List<Connection> connections;
synchronized (this) {
connections = new ArrayList<Connection>(this.connections);
this.connections.clear();
}
for (int i = 0, size = connections.size(); i < size; i++) {
Util.closeQuietly(connections.get(i));
}
}
}
- 邮箱 ：charon.chui@gmail.com
- Good Luck!
/**
* Manages reuse of HTTP and SPDY connections for reduced network latency. HTTP
* requests that share the same {@link com.squareup.okhttp.Address} may share a
* {@link com.squareup.okhttp.Connection}. This class implements the policy of
* which connections to keep open for future use.
*
* <p>The {@link #getDefault() system-wide default} uses system properties for
* tuning parameters:
* <ul>
* <li>{@code http.keepAlive} true if HTTP and SPDY connections should be
* pooled at all. Default is true.
* <li>{@code http.maxConnections} maximum number of idle connections to
* each to keep in the pool. Default is 5.
* <li>{@code http.keepAliveDuration} Time in milliseconds to keep the
* connection alive in the pool before closing it. Default is 5 minutes.
* This property isn't used by {@code HttpURLConnection}.
* </ul>
*
* <p>The default instance <i>doesn't</i> adjust its configuration as system
* properties are changed. This assumes that the applications that set these
* parameters do so before making HTTP connections, and that this class is
* initialized lazily.
*/
public class ConnectionPool {
private static final int MAX_CONNECTIONS_TO_CLEANUP = 2;
private static final long DEFAULT_KEEP_ALIVE_DURATION_MS = 5 * 60 * 1000; // 5 min
// 这个就是getDefault方法所返回的默认连接池。
private static final ConnectionPool systemDefault;
static {
String keepAlive = System.getProperty("http.keepAlive");
// 存活时间
String keepAliveDuration = System.getProperty("http.keepAliveDuration");
// 最大空暇连接数
String maxIdleConnections = System.getProperty("http.maxConnections");
long keepAliveDurationMs = keepAliveDuration != null ? Long.parseLong(keepAliveDuration)
: DEFAULT_KEEP_ALIVE_DURATION_MS;
if (keepAlive != null && !Boolean.parseBoolean(keepAlive)) {
systemDefault = new ConnectionPool(0, keepAliveDurationMs);
} else if (maxIdleConnections != null) {
systemDefault = new ConnectionPool(Integer.parseInt(maxIdleConnections), keepAliveDurationMs);
} else {
systemDefault = new ConnectionPool(5, keepAliveDurationMs);
}
}
/** The maximum number of idle connections for each address. */
private final int maxIdleConnections;
private final long keepAliveDurationNs;
private final LinkedList<Connection> connections = new LinkedList<Connection>();
/** We use a single background thread to cleanup expired connections. */
private final ExecutorService executorService = new ThreadPoolExecutor(0, 1,
60L, TimeUnit.SECONDS, new LinkedBlockingQueue<Runnable>(),
Util.threadFactory("OkHttp ConnectionPool", true));
private final Runnable connectionsCleanupRunnable = new Runnable() {
@Override public void run() {
List<Connection> expiredConnections = new ArrayList<Connection>(MAX_CONNECTIONS_TO_CLEANUP);
int idleConnectionCount = 0;
synchronized (ConnectionPool.this) {
for (ListIterator<Connection> i = connections.listIterator(connections.size());
i.hasPrevious(); ) {
Connection connection = i.previous();
if (!connection.isAlive() || connection.isExpired(keepAliveDurationNs)) {
i.remove();
expiredConnections.add(connection);
if (expiredConnections.size() == MAX_CONNECTIONS_TO_CLEANUP) break;
} else if (connection.isIdle()) {
idleConnectionCount++;
}
}
for (ListIterator<Connection> i = connections.listIterator(connections.size());
i.hasPrevious() && idleConnectionCount > maxIdleConnections; ) {
Connection connection = i.previous();
if (connection.isIdle()) {
expiredConnections.add(connection);
i.remove();
--idleConnectionCount;
}
}
}
for (Connection expiredConnection : expiredConnections) {
Util.closeQuietly(expiredConnection);
}
}
};
public ConnectionPool(int maxIdleConnections, long keepAliveDurationMs) {
this.maxIdleConnections = maxIdleConnections;
this.keepAliveDurationNs = keepAliveDurationMs * 1000 * 1000;
}
/**
* Returns a snapshot of the connections in this pool, ordered from newest to
* oldest. Waits for the cleanup callable to run if it is currently scheduled.
*/
List<Connection> getConnections() {
waitForCleanupCallableToRun();
synchronized (this) {
return new ArrayList<Connection>(connections);
}
}
/**
* Blocks until the executor service has processed all currently enqueued
* jobs.
*/
private void waitForCleanupCallableToRun() {
try {
executorService.submit(new Runnable() {
@Override public void run() {
}
}).get();
} catch (Exception e) {
throw new AssertionError();
}
}
public static ConnectionPool getDefault() {
return systemDefault;
}
/** Returns total number of connections in the pool. */
public synchronized int getConnectionCount() {
return connections.size();
}
/** Returns total number of spdy connections in the pool. */
public synchronized int getSpdyConnectionCount() {
int total = 0;
for (Connection connection : connections) {
if (connection.isSpdy()) total++;
}
return total;
}
/** Returns total number of http connections in the pool. */
public synchronized int getHttpConnectionCount() {
int total = 0;
for (Connection connection : connections) {
if (!connection.isSpdy()) total++;
}
return total;
}
/** Returns a recycled connection to {@code address}, or null if no such connection exists. */
public synchronized Connection get(Address address) {
Connection foundConnection = null;
for (ListIterator<Connection> i = connections.listIterator(connections.size());
i.hasPrevious(); ) {
Connection connection = i.previous();
if (!connection.getRoute().getAddress().equals(address)
|| !connection.isAlive()
|| System.nanoTime() - connection.getIdleStartTimeNs() >= keepAliveDurationNs) {
continue;
}
i.remove();
if (!connection.isSpdy()) {
// 不是spdy连接
try {
// Platforml类对当前Android平台做了适配。
Platform.get().tagSocket(connection.getSocket());
} catch (SocketException e) {
Util.closeQuietly(connection);
// When unable to tag, skip recycling and close
Platform.get().logW("Unable to tagSocket(): " + e);
continue;
}
}
// 找到可复用的Connection
foundConnection = connection;
break;
}
// 针对spdy连接，加入到连接池中
if (foundConnection != null && foundConnection.isSpdy()) {
connections.addFirst(foundConnection); // Add it back after iteration.
}
executorService.execute(connectionsCleanupRunnable);
return foundConnection;
}
/**
* Gives {@code connection} to the pool. The pool may store the connection,
* or close it, as its policy describes.
*
* <p>It is an error to use {@code connection} after calling this method.
*/
public void recycle(Connection connection) {
if (connection.isSpdy()) {
return;
}
if (!connection.isAlive()) {
Util.closeQuietly(connection);
return;
}
try {
Platform.get().untagSocket(connection.getSocket());
} catch (SocketException e) {
// When unable to remove tagging, skip recycling and close.
Platform.get().logW("Unable to untagSocket(): " + e);
Util.closeQuietly(connection);
return;
}
synchronized (this) {
connections.addFirst(connection);
connection.incrementRecycleCount();
connection.resetIdleStartTime();
}
executorService.execute(connectionsCleanupRunnable);
}
/**
* Shares the SPDY connection with the pool. Callers to this method may
* continue to use {@code connection}.
*/
public void share(Connection connection) {
if (!connection.isSpdy()) throw new IllegalArgumentException();
executorService.execute(connectionsCleanupRunnable);
if (connection.isAlive()) {
synchronized (this) {
connections.addFirst(connection);
}
}
}
/** Close and remove all connections in the pool. */
public void evictAll() {
List<Connection> connections;
synchronized (this) {
connections = new ArrayList<Connection>(this.connections);
this.connections.clear();
}
for (int i = 0, size = connections.size(); i < size; i++) {
Util.closeQuietly(connections.get(i));
}
}
}
文章比較长。。
看了一天，就一口气写完了，希望能看到这里。
很多其它内容能够去我的github上看。
Github
251
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
