DELL R410升级网卡驱动

官方链接http://zh-cn.broadcom.com/support/ethernet_nic/netxtremeii.php（官方驱动的名字偶尔会改）

 

注意确保服务器的kernel-devel，kernel-headers已经安装

 

一，源码 RPM 包安装方式

[root@localhost ~]# ls

linux-7.4.27.zip  Server

[root@localhost Driver]# pwd

/root/Server/Linux/Driver

[root@localhost Driver]# ll

total 55488

-r-xr-xr-x 1 root root     8253 Jan 18 00:28 INSTALL.TXT

-r-xr-xr-x 1 root root  1879945 Jan 18 00:28 netxtreme2-7.4.27-1.src.rpm

-r-xr-xr-x 1 root root  2544972 Jan 18 00:28 netxtreme2-7.4.27.tar.gz

-r-xr-xr-x 1 root root 51338302 Jan 18 00:28 netxtreme2_sup-7.4.27-1.ISO.tar.gz

-r-xr-xr-x 1 root root     7669 Jan 18 00:28 README.bnx2fc.TXT

-r-xr-xr-x 1 root root    18580 Jan 18 00:28 README.bnx2i.TXT

-r-xr-xr-x 1 root root    12413 Jan 18 00:28 README.bnx2.TXT

-r-xr-xr-x 1 root root    17927 Jan 18 00:28 README.bnx2x.TXT

-r-xr-xr-x 1 root root    42127 Jan 18 00:28 RELEASE.bnx2fc.TXT

-r-xr-xr-x 1 root root   142874 Jan 18 00:28 RELEASE.bnx2i.TXT

-r-xr-xr-x 1 root root   179143 Jan 18 00:28 RELEASE.bnx2.TXT

-r-xr-xr-x 1 root root   463481 Jan 18 00:28 RELEASE.bnx2x.TXT

-r-xr-xr-x 1 root root     4562 Jan 18 00:28 RELEASE.fclibs.TXT

[root@localhost Driver]# rpm -ivh netxtreme2-7.4.27-1.src.rpm             安装源码包
   1:netxtreme2             ########################################### [100%]

[root@localhost ~]#  cd /usr/src/redhat/

[root@localhost redhat]# ls

BUILD  RPMS  SOURCES  SPECS  SRPMS

[root@localhost redhat]# rpmbuild -bb SPECS/netxtreme2.spec

在源码编译结束的时候会看到如下的提示（参考，版本号不同）
Wrote: /usr/src/redhat/RPMS/i386/netxtreme2-4.8.10-1.i386.rpm
Executing(%clean): /bin/sh -e /var/tmp/rpm-tmp.59603
+ umask 022
+ cd /usr/src/redhat/BUILD
+ cd netxtreme2-4.8.10
+ rm -rf /var/tmp/netxtreme2-buildroot /usr/src/redhat/BUILD/file.list.netxtreme2
+ exit 0                   (如果返回值为1-255，就说明编译没有成功)

[root@localhost redhat]# rpm -ivh RPMS/i386/netxtreme2-4.8.10-1.i386.rpm           安装编译之后生成的rpm包（请根据实际产生的执行）
Preparing...                ########################################### [100%]
   1:netxtreme2             ########################################### [100%]

这里有一点就要注意了，装完之后你可能不知道生成的模块去了哪里，可以用以下命令来查询，
[root@localhost redhat]# rpm -ql netxtreme2         （netxtreme2 软件名，不是完整的包名）
/lib/modules/2.6.18-53.el5/updates/bnx2.ko     这下就知道模块所在的位置了,在/lib/modules/2.6.18-53.el5/updates 里边
/lib/modules/2.6.18-53.el5/updates/bnx2x.ko
/lib/modules/2.6.18-53.el5/updates/cnic.ko
/usr/share/doc/netxtreme2-4.8.10
/usr/share/doc/netxtreme2-4.8.10/LICENSE
/usr/share/doc/netxtreme2-4.8.10/README.bnx2.TXT
/usr/share/doc/netxtreme2-4.8.10/README.bnx2x.TXT
/usr/share/doc/netxtreme2-4.8.10/RELEASE.bnx2.TXT
/usr/share/doc/netxtreme2-4.8.10/RELEASE.bnx2x.TXT
/usr/share/man/man4/bnx2.4.gz
/usr/share/man/man4/bnx2x.4.gz
/usr/src/bnx2/bnx2.h
/usr/src/bnx2/cnic_drv.h
/usr/src/bnx2/cnic_if.h

[root@localhost redhat]# lsmod |grep bnx2           安装后默认没有加载该模块
[root@localhost redhat]# modprobe bnx2                  手动加载，modprober命令会去搜索/lib/modules/2.6.18-53.el5下边所有的包
[root@localhost redhat]# lsmod |grep bnx2                再次查看就有了
bnx2                  171400 0

附三个生成的模块的说明，这个在Broadcom的tar包解压后，里边有详细说明
- bnx2 driver for the Broadcom NetXtreme II BCM5706/BCM5708/5709/5716
10/100/1000/2500/10000 Mbps PCIX/PCIE Ethernet Network Controller.

- bnx2x driver for the Broadcom NetXtremeII BCM57710/BCM57711/BCM57711E
10/100/1000/2500/10000 Mbps PCIE Ethernet Network Controller.

- cnic driver that supports additional features required by the bnx2i iSCSI
offload driver. The bnx2i iSCSI driver is packaged separately.
-------------------------------------------------------

二，tar包安装方法

[root@localhost ~]# ls

linux-7.4.27.zip  Server

[root@localhost Driver]# pwd

/root/Server/Linux/Driver

[root@localhost Driver]# tar zxvf netxtreme2-7.4.27.tar.gz   解压tar.gz包
[root@localhost Driver]# cd netxtreme2-7.4.27

[root@localhost netxtreme2-7.4.27]# ls

bnx2  bnx2-2.74.20  bnx2fc  bnx2fc-2.2.17  bnx2i  bnx2i-2.7.4.2b  bnx2x  bnx2x-1.74.22  fclibs  fclibs-2.0.3  INSTALL.TXT  Makefile

此时在这个地方就可以编译了，编译并安装之后会生成三个模块： bnx2.ko,bnx2x.ko,cnic.ko
[root@localhost netxtreme2-7.4.27]# make;make install

如果只需要生成bnx2.ko(cnic.ko是附带的)这个模块，可以进入当前目录下边的子目录bnx2/src,然后执行make;make install

[root@localhost src]# pwd

/root/Server/Linux/Driver/netxtreme2-7.4.27/bnx2/src

[root@localhost src]# make && make install   编译并安装

[root@localhost src]# rmmod bnx2 && depmod && modprobe bnx2 加载模块

安装完成后查看版本号

[root@localhost ~]# modinfo bnx2

filename:       /lib/modules/2.6.28.10/updates/bnx2.ko

version:        2.2.3f

license:        GPL

description:    Broadcom NetXtreme II BCM5706/5708/5709/5716 Driver

author:         Michael Chan

srcversion:     80450159F5D7F2BDAA8A0D4

alias:          pci:v000014E4d0000163Csv*sd*bc*sc*i*

alias:          pci:v000014E4d0000163Bsv*sd*bc*sc*i*

alias:          pci:v000014E4d0000163Asv*sd*bc*sc*i*

alias:          pci:v000014E4d00001639sv*sd*bc*sc*i*

alias:          pci:v000014E4d000016ACsv*sd*bc*sc*i*

alias:          pci:v000014E4d000016AAsv*sd*bc*sc*i*

alias:          pci:v000014E4d000016AAsv0000103Csd00003102bc*sc*i*

alias:          pci:v000014E4d0000164Csv*sd*bc*sc*i*

alias:          pci:v000014E4d0000164Asv*sd*bc*sc*i*

alias:          pci:v000014E4d0000164Asv0000103Csd00003106bc*sc*i*

alias:          pci:v000014E4d0000164Asv0000103Csd00003101bc*sc*i*

depends:        

vermagic:       2.6.28.10 SMP mod_unload modversions 

parm:           disable_msi:Disable Message Signaled Interrupt (MSI) (int)

parm:           stop_on_tx_timeout:For debugging purposes, prevent a chip  reset when a tx timeout occurs (int)

 

[root@localhost ~]# /sbin/ethtool -i eth0

driver: bnx2

version: 2.2.3f

firmware-version: 6.2.15 bc 5.2.3 NCSI 2.0.11

bus-info: 0000:01:00.0

 

[root@localhost ~]# lsmod |grep bnx2

bnx2                  224908  0 

 

附：

升级固件，下载地址：
ftp://ftp.us.dell.com/network/NETW_FRMW_LX_R319248.BIN
执行权限chmod 755 NETW_FRMW_LX_R319248.BIN
./NETW_FRMW_LX_R319248.BIN

最后重启就OK