[LintCode] Add Two Numbers II

Problem

You have two numbers represented by a linked list, where each node contains a single digit. The digits are stored in forward order, such that the 1's digit is at the head of the list. Write a function that adds the two numbers and returns the sum as a linked list.

Example

Given 6->1->7 + 2->9->5. That is, 617 + 295.

Return 9->1->2. That is, 912.

Tags

  • Linked List
  • High Precision

Solution

public class Solution {
    /*
     * @param l1: The first list.
     * @param l2: The second list.
     * @return: the sum list of l1 and l2.
     */
    public ListNode addLists2(ListNode l1, ListNode l2) {
        // write your code here
        ListNode n1 = reverse(l1);
        ListNode n2 = reverse(l2);
        ListNode node = new ListNode(0);
        ListNode n3 = node;
        int sum = 0, carry = 0;
        while (n1 != null || n2 != null || carry != 0) {
            int v1 = n1 == null ? 0 : n1.val;
            int v2 = n2 == null ? 0 : n2.val;
            n1 = n1 == null ? null : n1.next;
            n2 = n2 == null ? null : n2.next;
            sum = v1 + v2 + carry;
            ListNode cur = new ListNode(sum % 10);
            carry = sum / 10;
            n3.next = cur;
            n3 = cur;
        }
        return reverse(node.next);
    }
    private ListNode reverse(ListNode head) {
        ListNode newHead = null;
        while (head != null) {
            ListNode temp = head.next;
            head.next = newHead;
            newHead = head;
            head = temp;
        }
        return newHead;
    }
}
  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
自动控制节水灌溉技术的高低代表着农业现代化的发展状况,灌溉系统自动化水平较低是制约我国高效农业发展的主要原因。本文就此问题研究了单片机控制的滴灌节水灌溉系统,该系统可对不同土壤的湿度进行监控,并按照作物对土壤湿度的要求进行适时、适量灌水,其核心是单片机和PC机构成的控制部分,主要对土壤湿度与灌水量之间的关系、灌溉控制技术及设备系统的硬件、软件编程各个部分进行了深入的研究。 单片机控制部分采用上下位机的形式。下位机硬件部分选用AT89C51单片机为核心,主要由土壤湿度传感器,信号处理电路,显示电路,输出控制电路,故障报警电路等组成,软件选用汇编语言编程。上位机选用586型以上PC机,通过MAX232芯片实现同下位机的电平转换功能,上下位机之间通过串行通信方式进行数据的双向传输,软件选用VB高级编程语言以建立友好的人机界面。系统主要具有以下功能:可在PC机提供的人机对话界面上设置作物要求的土壤湿度相关参数;单片机可将土壤湿度传感器检测到的土壤湿度模拟量转换成数字量,显示于LED显示器上,同时单片机可采用串行通信方式将此湿度值传输到PC机上;PC机通过其内设程序计算出所需的灌水量和灌水时间,且显示于界面上,并将有关的灌水信息反馈给单片机,若需灌水,则单片机系统启动鸣音报警,发出灌水信号,并经放大驱动设备,开启电磁阀进行倒计时定时灌水,若不需灌水,即PC机上显示的灌水量和灌水时间均为0,系统不进行灌水。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值