CentOS 6.4上通过yum安装Nagios-3.5.0 [服务端/server端]

2019独角兽企业重金招聘Python工程师标准>>>

原文见：http://sharadchhetri.com/2013/05/19/installing-nagios-3-5-0-in-centos-6-4-using-yum/

#安装：

rpm -ivh http://dl.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm

yum install nagios nagios-devel nagios-plugins* gd gd-devel httpd php gcc glibc glibc-common openssl

#设置密码， 默认用户名和密码都是nagiosadmin
htpasswd -c /etc/nagios/passwd nagiosadmin #回车然后输入密码

#检查以下配置是否一样：vi /etc/nagios/cgi.cfg
=============================
    # AUTHENTICATION USAGE
    use_authentication=1

    # SYSTEM/PROCESS INFORMATION ACCESS
    authorized_for_system_information=nagiosadmin

    # CONFIGURATION INFORMATION ACCESS
    authorized_for_configuration_information=nagiosadmin

    # SYSTEM/PROCESS COMMAND ACCESS
    authorized_for_system_commands=nagiosadmin

    # GLOBAL HOST/SERVICE VIEW ACCESS
    authorized_for_all_services=nagiosadmin
    authorized_for_all_hosts=nagiosadmin

    # GLOBAL HOST/SERVICE COMMAND ACCESS
    authorized_for_all_service_commands=nagiosadmin
    authorized_for_all_host_commands=nagiosadmin
#========================================

#设置开机自启动:
chkconfig --level 3 nagios on
chkconfig --level 3 httpd on

#启动：
/etc/init.d/httpd start
/etc/init.d/nagios start

#注意SELINUX和IPTABLE 以及你的80端口是否被占用

安装完成，http://ip/nagios 就能看到效果

下面配置要管理的节点：

#新建这个文件，里面添加要监控的机器 
#vi /etc/nagios/conf.d/hosts.cfg
#===================
define host{
use linux-server
host_name mysql-node01
alias mysql-node01
address 192.168.1.110  #这个IP是我mysql机器所的IP
}
#=================

===

#添加被监控机器需要被监控那些项目  
#vi /etc/nagios/conf.d/services.cfg

#===========================
define service{
use generic-service
host_name mysql-node01
service_description PING
check_command check_ping!100.0,20%!500.0,60%
}

define service{
use generic-service
host_name mysql-node01
service_description Current Load
check_command check_nrpe!check_load
}

define service{
use generic-service
host_name mysql-node01
service_description Total Processes
check_command check_nrpe!check_users
}
#===========================

#这里对mysql那台机器进行了3项监控: ping load totalProcesses
#其中ping没用到nrpe

==============

#在末尾为nrpe添加命令 
#vi /etc/nagios/objects/commands.cfg

#===========================
define command{
command_name check_nrpe
command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$
}
#===========================

===============

#各种重启
/etc/init.d/nagios restart
/etc/init.d/nrpe restart
/etc/init.d/httpd restart

注意iptables，服务端和客户端均需要5666端口能被互相访问

参考此文配置客户端：CentOS 6.4上通过yum安装Nagios-3.5.0 [客户端/client端]

配置完后，刷新nagios页面，就能看到mysql-node01了

附上一篇别人的：http://www.crsay.com/network/nagios-configure-is-simple.html
比较完整，有pnp的配置

转载于:https://my.oschina.net/lanybass/blog/140400