高并发、大流量网卡调优 _转

http://navyaijm.blog.51cto.com/4647068/1334671

 

周五晚上LVS集群的一台LB由于CPU单核耗尽挂掉了，最后查到原因是网卡调优没有生效，今天查了一下网卡调优的资料，感谢同事higkoo给我讲解了一下这方面的东西，下面是关于我们公司网卡调优的相关知识，欢迎大家共同探讨，让我们的机器跑的更high。

1、Broadcom的网卡建议关闭GRO功能

1 2 3 4

ethtool -K eth0 gro off ethtool -K eth1 gro off ethtool -K eth2 gro off ethtool -K eth3 gro off

2、关闭irqbalance服务并手动分配网卡中断

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

service irqbalance stop chkconfig irqbalance off # 查看网卡中断号 grep ethx /proc/interrupts # 分配到每颗颗CPU核上 cat /proc/irq/ {84,85,86,87,88,89,90,91,92,93} /smp_affinity （下面 echo 的值从此获取） echo 1 > /proc/irq/84/smp_affinity echo 2 > /proc/irq/85/smp_affinity echo 4 > /proc/irq/86/smp_affinity echo 8 > /proc/irq/87/smp_affinity echo 10 > /proc/irq/88/smp_affinity echo 20 > /proc/irq/89/smp_affinity echo 40 > /proc/irq/90/smp_affinity echo 80 > /proc/irq/91/smp_affinity echo 100 > /proc/irq/92/smp_affinity echo 200 > /proc/irq/93/smp_affinity

3、开启网卡的RPS功能 （Linux内核2.6.38或以上版本支持）

1 2 3 4 5 6 7 8 9 10 11 12 13 14

# Enable RPS (Receive Packet Steering) rfc=4096 cc=$( grep -c processor /proc/cpuinfo ) rsfe=$( echo $cc*$rfc | bc ) sysctl -w net.core.rps_sock_flow_entries=$rsfe for fileRps in $( ls /sys/class/net/eth * /queues/rx- * /rps_cpus ) do echo fff > $fileRps done for fileRfc in $( ls /sys/class/net/eth * /queues/rx- * /rps_flow_cnt ) do echo $rfc > $fileRfc done tail /sys/class/net/eth * /queues/rx- */{rps_cpus,rps_flow_cnt}

献上一个完整的脚本：

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

vi /opt/sbin/change_irq .sh #!/bin/bash ethtool -K eth0 gro off ethtool -K eth1 gro off ethtool -K eth2 gro off ethtool -K eth3 gro off service irqbalance stop chkconfig irqbalance off cat /proc/irq/ {84,85,86,87,88,89,90,91,92,93} /smp_affinity echo 1 > /proc/irq/84/smp_affinity echo 2 > /proc/irq/85/smp_affinity echo 4 > /proc/irq/86/smp_affinity echo 8 > /proc/irq/87/smp_affinity echo 10 > /proc/irq/88/smp_affinity echo 20 > /proc/irq/89/smp_affinity echo 40 > /proc/irq/90/smp_affinity echo 80 > /proc/irq/91/smp_affinity echo 100 > /proc/irq/92/smp_affinity echo 200 > /proc/irq/93/smp_affinity # Enable RPS (Receive Packet Steering) rfc=4096 cc=$( grep -c processor /proc/cpuinfo ) rsfe=$( echo $cc*$rfc | bc ) sysctl -w net.core.rps_sock_flow_entries=$rsfe for fileRps in $( ls /sys/class/net/eth * /queues/rx- * /rps_cpus ) do echo fff > $fileRps done for fileRfc in $( ls /sys/class/net/eth * /queues/rx- * /rps_flow_cnt ) do echo $rfc > $fileRfc done tail /sys/class/net/eth * /queues/rx- */{rps_cpus,rps_flow_cnt} chmod +x /opt/sbin/change_irq .sh echo "/opt/sbin/change_irq.sh" >> /etc/rc . local PS：记得修改网卡中断号，别直接拿来用哦

转载于:https://www.cnblogs.com/kaka100/p/3455609.html