1)端×××换机属性 配置
edit vlans Test //创建vlan,名称为Test
set vlan-id 3 //设置vlan-id
set l3-interface vlan.3 //绑定3层子接口
set description "Test VLAN" //设置vlan描述
set interface ge-0/0/1.0 //将接口ge-0/0/1.0 加入到vlan中
set interface ge-0/0/2.0 //将接口ge-0/0/2.0 加入到vlan中
2)set interfaces vlan.3 family inet address 202.100.2.10 //配置3层子接口IP地址
3)将接口改为access模式,并加入到新创建的vlan中
set int ge-0/0/1.0 family ethernet-switching port-mode access
set int ge-0/0/1.0 family ethernet-switching vlan members 3
#set int ge-0/0/1 vlan-tagging unit 0 vlan-id 3
set int ge-0/0/2.0 family ethernet-switching port-mode access
set int ge-0/0/2.0 family ethernet-switching vlan members 3
#set int ge-0/0/2 vlan-tagging unit 0 vlan-id 3
转载于:https://blog.51cto.com/terence88/1728970